Ever Wondered How Tires Are Mounted & Balanced for Your Car, Truck, or SUV?
HTML-код
- Опубликовано: 10 сен 2024
- Shop Now at 1AAuto! 1aau.to/m/Visit...
Ever wondered how tires are mounted and balanced? This video shows you the whole process! Sure, most home mechanics aren't going to have a tire machine in their garage, but we have all taken our vehicles in for a new set of tires! If you've ever wondered what exactly they do, check out this video!
Check out this playlist for more automotive general knowledge videos!
• Car Knowledge
For More Info visit us at 1aau.to/h/cj4/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
No comments on the thumbnail 😲?! ✨I am enchanted!✨ *clears throat * I'm strictly here to learn, sir. . .
The thumbnail is the only reason I am here right now. How the hell...
I’m actually getting new tires installed on my car later today at the Walmart auto care center in my town. I hope they do all this when they install them. I’m sure they will.
Have done this in the shop i work at and my god do i hate seating the bead, Its sketchy dealing with such high pressure air, Great video, You got it spot on.
+Punisher Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
WOW, 1A has stepped up their YT game quite a bit. Rarely like music in these types of vids, however good choice a la Top Gear, maybe just lower the volume a bit more so we can hear the presenter better. Camera work is very slick, someone's got a steadi-cam....
+Boots Thanks for the feedback, glad you liked it! We'll pass this along to our production team for future videos.
I like the way they had the cameras inside of a tire for the bead breaker on the turntable. Again, big shout out to the cameraman. LOL 👏👏👏👏👏
Thank you for the demonstration. However, when mounting soft alloy wheels it is best to use the external lip clamp feature of the tire machine in order to prevent putting unwanted dimples in the customers expensive alloy wheels. Only use the internal clamp feature on steel wheels or wheels that you simply don't care if they are damaged. It's the small but significant details that make the difference. If you're paying for a professionals expertise then it should be expected.
I was always curious the procedure to do this. Thank you for taking the time to make these videos!
+Mildmannered ThinkingMan Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Always keep your valve stem at 12 and 6 when breaking it down so you dont brake the sensor. Some have a sensor connected to valve stem anf others are a band which is when the sensor is directly across from valve stem . If it was installed correctly.
I do this everyday for work and here i am watching videos on RUclips about it. Lol.
So easy when you have the right tools
Very interesting video and I learned from that show & tell. Good job.
Once u take the tire off of the rim, that's when u should point out the tire monitor. And is the tire monitor telling me what the pressure of the tire is? Is that the job of the monitor? When did u take off the valve? I didn't see u do it. U said u hv to put the valve back on.
I guess I better watch Costco doing my tires to make sure they clean my rims should they need it.
Thanks again for the video.
I like that tire machine
Also nice drone shot at the end
+Jonathan Williams Thanks for the feedback!
This was truly informative. Thanks!
+Leslie Barrueta Thanks for the feedback!
The end of this video was so cool that it was a GREAT HAPPY ENDING !
Wow loved the drone b-roll scene at end...
Pretty good man 👍
You didn't say how the balancing machine tells you exactly where to put each weight on the tire.
+Philip Webb Thanks for watching! The machine tells you how much weight to up on either the inner or outer part of the wheel. If you need to put weight on both sides you just put them on opposite ends, 6 o'clock and 12 o'clock.
@@1AAuto Yes, weight needs to go on the inner and/or outer surface but WHERE on the inner or outer surface?
Great informative appreciated
also tires have yellow /red dots, yellow with red , line with valve directly if only red then across to otherside with valve 6/12 o clock
You didn't show how to know where in the rim should you put the weights on when the machine stops???
Im doing research and going to mount my own tires in a bit..1. isnt there a dot mark where u r suppose to put it next to the valve? 2. u said u want two tires going one way and the other 2 going the other way, is that rt? 3. how do you know which side goes on the inside r ther markings on the sidewall or u use the blue line as the indicator? thnks
This was by far my favorite and the best episode ever! !!!!
Why do tire shops not pay any attention to the colored dots on the tire? Tire manufactures recommend the yellow dot line up with the stem for balance purposes.
Great video..
What about the dots on the tires?
Please explain which tires go in which direction.
Shoukd the sticky weight glue be taken off
How much is this machine? I might buy one, do it myself and do the neighborhood tires to pay for it.
Please make a video on trans fluid change for 2015 Honda Civic si please
+TRU J. LLAPITAN We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c
no I haven’t wondered. At 16 I was using these machines in auto shop. One thing I have always wondered was why does it cost so much to balance the tires when it’s so easy
the expense of the machine, weights, employee, facility, insurances, utilities, taxes, etc., all add to the cost of doing business. Even the most mundane tasks acquire some degree of expense that must be covered or the business will not exist.
Good video but it didn't cover the red and yellow dots on the tire and what their significance is and where they should be placed on the rim. Different videos say different things, can you please verify?
Hola amigos les saluda desde chile buenos videos y paracticos pero podrian poner subtitulado en español por favor para entender mejor y saber de que estan hablando son muy importantes de antemano mil gracias y sigan así gracias y si podrian poner un video donde salga como arreglar el respaldar lumbar de una ford explorer 2006 gracias
+Horus Sebeck Thanks for checking us out! We're always cycling through common cars and repairs. We'll add this repair to our list. We are also working on our CC system and hope to have this in Spanish soon! 1aau.to/m/Shop-1AAuto-c
How can you determine if the wheel is hub centric or lug centric? And doesn’t this determine how the wheel is mounted on the balancer? Thanks.
+Les Tapp Thanks for watching! The easiest way to tell the difference between the two designs is to look at the hub of a hub and wheel assembly. If the hole in the center of the wheel fits snugly against the hub, then it is hub-centric. If there is a gap between the center hole of the wheel and the hub, then it is lug-centric. You would have to use an adapter to mount lug centric wheels to the machine to be balanced.
@@1AAuto thanks for the information.
you should clamp the wheel from the outside not the inside, any water, dirt, brake dust and it will slip potentially causing harm to operator or the wheel
+Jason MacCárthaigh Thanks for the tip! We'll pass this info along to our production team.
You can tell this was a sales man that doesn’t know the machines. And notice how that tire iron smacks the wheel when the he rotated the table. Good tire techs will pull that out after you fold the lip over the duck head it prior to rotating..this guy demonstrates how to damage wheels and picky customers will have the shop pay for repairs. But this is why high end shops don’t even mess with these machines and go to straight touch less.
👍👌👍👌👍👌
Posh machine
Why didn't you literally throw the tire on top it would have just fell in
That tire machine is way outdated. Should have purchased corghi master code. I would never bring my vehicle to your shop.
Funny
OOH MY GOD, WHERE IS YOUR MASK AND HAND SANITIZER BEFORE YOU OPERATE ALL OF THAT MACHINERY????? YOU'RE KILLING GRANDMA BY MAKING THIS VIDEO!
Hey man. If it’s grams time to go then it’s grams time to go. No stopping god from taking her home.