Guys Hello. Fristly very good job with this software. I Found why there is problem with the error " an error has occured, Exiting". This is not because of the version of autocad etc. Just when you join the points to autocad you firstly must do the specific process "POINTS --> PROCESS POINTS --> SELECT FEATURES LAYERS - SELECT ALL --> OK. and the triangles and contour.
Αντιμετωπίζω το σφάλμα "an error has accured, existing" ενώ ολοκληρώνω τη διαδικασία "sections by dtm". Υποθέτω ότι το σφάλμα είναι η αδυναμία λήψης του αρχείου csv μετά τη διαδικασία. Αργότερα οταν κάνω L section μου εμφανίζει file not found . Σου έχει τύχει; Ευχαρισ΄τω εκ των προτέρων
for all those who are having the "insufficient points" error, found the answer, always your swdtm software should be older than Autocad, my Autocad 2017, swdtm 2014, for swdtm 2019 version it didn't went ok.
While importing from excel : shows "Please select correct range first" and while importing from file.....after selection import fails with "Error with Autocad." please guide.
Even after point are successfully imported and processed point are not shown in autocad. I have zoom and extend but still its not working. Please help me.
Good evening, I have a problem by processing in triangulate like others. It appears to me "An error has occurred. Exiting." Could you help me please? Thank you very much
Please help me, how can I get "curved lines" instead of straight lines? As showed on your RUclips thumbnail video. Sorry about my bad english :) Greetings from Brazil :)
I have some permanent structures like building as detailing through which contour lines do not pass. So, how can I draw contour lines without passing through them?
Good morning I downloaded the latest version of the sw_dtm software. I have a problem when processing points, processing only 1. Therefore, even triangulation can not be created ... You can help me?
for all those who are having the "insufficient points" error, found the answer, always your swdtm software should be older than Autocad, my Autocad 2017, swdtm 2014, for swdtm 2019 version it didn't went ok.
close all the apps (CAD, SWDTM and Excel), arrange the excel file in proper format as shown in the video, reopen the the apps firstly CAD then SWDTM. It will work .
Any trick to make cross section of a 3dpolyline in sw DTM. Cross section coming at fix interval, I need in between , I will draw 3d polyline then select that and cx draw.
Get Two months FREE at SkillShare:
skl.sh/2XYlXoU
Now you can join our Facebook group. Click on the link below ot join:
facebook.com/groups/2574131862914436/
This guy is the best guy who demonstrate a very complex tech issue in a simple way. GBU
Guys Hello. Fristly very good job with this software. I Found why there is problem with the error " an error has occured, Exiting". This is not because of the version of autocad etc. Just when you join the points to autocad you firstly must do the specific process "POINTS --> PROCESS POINTS --> SELECT FEATURES LAYERS - SELECT ALL --> OK. and the triangles and contour.
Μπράβο ρε Δημήτρη! 'Εχω φάει όλη την ινδία στη μαπα για να το βρω και ήρθε απο την Ελλαδα η λύση !
@@ΓεώργιοςΜπασαντής :)
@@ΓεώργιοςΜπασαντής χαχα, είδες υπάρχουν μικρές Ινδίες και στην Ελλάδα. Να σαι καλα!
Αντιμετωπίζω το σφάλμα "an error has accured, existing" ενώ ολοκληρώνω τη διαδικασία "sections by dtm". Υποθέτω ότι το σφάλμα είναι η αδυναμία λήψης του αρχείου csv μετά τη διαδικασία. Αργότερα οταν κάνω L section μου εμφανίζει file not found . Σου έχει τύχει; Ευχαρισ΄τω εκ των προτέρων
OMG this software make my life so much easier ...
How I download this software
Very Nice,,,Awesome and easy Instructions for Learning
for all those who are having the "insufficient points" error,
found the answer, always your swdtm software should be older than Autocad, my Autocad 2017, swdtm 2014,
for swdtm 2019 version it didn't went ok.
hello sir, where can i download 2014 please?
its very easy and convinient nice video and very useful video bro
thanks
Love you bro
Thank you very much
Great jobb
eSWDTM which software is this sir ...Nice explanation thank u
While importing from excel : shows "Please select correct range first"
and while importing from file.....after selection import fails with "Error with Autocad."
please guide.
good effort dear.very thanks
i am your subscriber now
ERROR SW dtm said excel is not open, please open the spredsheet ad select the correct range, Do you know how to solve this?? thank you
nice and easy to do ...
Does it work with AutoCAD LT or with ZWCAD 2018 ?
Hi, works great. Thank you so much
Even after point are successfully imported and processed point are not shown in autocad. I have zoom and extend but still its not working. Please help me.
Hi sir ,i installed sw dtm but its not work properly to draw contour pls tell how it's work
Hello sir, while doing this activity, its come out warning said that "insufficient point". any idea how to solve this thing
very informative video....
From where we can download SW_DTM software?
method is good but iam not getting this drawing done might be some where my procedure is going wrong sir plz help
sir, for the triangulation it shows that "insufficient points" .. so how to generate the contours
Good evening,
I have a problem by processing in triangulate like others. It appears to me "An error has occurred. Exiting." Could you help me please?
Thank you very much
Same problem
Φίλε μου μήπως το έλυσες το πρόβλημα; ή μήπως έχεις βρει καποιον άλλον τροπο για ισοϋψείς; Ευχαριστώ
sir, which program you use for contour line with autocad, can we download it from google in free
Please help me, how can I get "curved lines" instead of straight lines?
As showed on your RUclips thumbnail video.
Sorry about my bad english :)
Greetings from Brazil :)
Can you generate surface over the contour lines?
Survey datas in exel sheet in which system ? Lat long in decimal deg or utm? Please specify.
If the points are already on the dwg file, is the process gonna be different?
I cannot plot the UTM coordinate to contour
After double click my mouse button,I still can't able to see my contour in AutoCAD 2007
Please help urgently
middle button
I have some permanent structures like building as detailing through which contour lines do not pass. So, how can I draw contour lines without passing through them?
so my contour lines are coming out from the boundary. what could be the reason ?
Hello, How to make contour lines if the given data are Front Sight and Elevation only? anyone? Thanks!
After contour annotation option will selection they suddenly cancel the option
Hello sir I want to prepare a capacity contour can you explain how to draw it in autocad
i am not able to import point in auto cad .even by sample file. I have auto cad 2004 and 2010
Sir, If any other option for import the points in to autoCAD other than pressing middle button.
press z . press enter. press e . press enter.
its like clicking the middle mouse button.
why auto cad 2007 can't open?? "autocad is either busy or not open.please make sure that it is open and not busy,then try again"
Sir please tell me how to Convert auto cad data to csv file. N,E,Z,CODE ,
Sir how to install sw dtm software. Application cannot be started. Contact the application vendor.
Good morning I downloaded the latest version of the sw_dtm software. I have a problem when processing points, processing only 1. Therefore, even triangulation can not be created ...
You can help me?
Can you share that app application please
when i am trying to triangulate, it says "An error has occured, Exiting".
Is this program compatible with autocad 2017 64bit ?
Same here, AutoCad 2010 :(
Does this work with AutoCAD LT or just full AutoCAD? I keep getting an error.
Checked the manual, says Autocad, makes no mention of autocad LT, so I assume its a no.
Hello, Draw Boundary, Triangulate dont work on Autocad 2017
Hello. Very nice work! But i have a problem, when i triangulate, an error says "Insufficient points.". I have +- 100pts... Can u help me ?
Nope, it isn't. The problem is the version of autocad. 2017 works fine but 2014 won't.
I'm really impress by your software anyway! thx
i have also tried it but it shows insufficient points when ever i triangulate please help me sir its urgent
the same problem am experiencing
@@iddrisbarasa9928 same problem here
for all those who are having the "insufficient points" error,
found the answer, always your swdtm software should be older than Autocad, my Autocad 2017, swdtm 2014,
for swdtm 2019 version it didn't went ok.
Keep getting insufficient points error :( why is that?
while importing points from excel it says : First select the correct range and then click ok: what does that mean??
Same problem
close all the apps (CAD, SWDTM and Excel), arrange the excel file in proper format as shown in the video, reopen the the apps firstly CAD then SWDTM. It will work .
you need to select 5 cells in one row (total of 5 columns) even if they were empty
Any trick to make cross section of a 3dpolyline in sw DTM.
Cross section coming at fix interval,
I need in between , I will draw 3d polyline then select that and cx draw.
why does it not draw all the contours on the points
Why? An error has occored. exiting.
I need sw dtm software
how i draw porfile, when i have just center line nsl & frl
Hai sir software is instal complet but not open sw_dtm software sir please clear problem
Sir urgent sir please respond
Bueno
How to draw contour in 2D? Plz
how can we remove the sharp edges ?
bro sikaunu paryo hai malai ni!
how to download sw dtm
plz sent ws DTM link
how istall
are these elevation lable real
If he's from Nepal, possibly yes.
sir please send me a exel file for practice
Sir show insufficient points
sir swdtm install nhi hota..
Hi
kese kr install.. aap ke watapp no.h..?
Beest
It looks like an Indian speaking in US accent 😂😂
buzzing