It will be close for pellet fuel. The Testo 320 and 330 have different moisture settings for wood, not sure if the Bacharach has those. Wood burning is much more common in Europe. All that these settings impact though is the efficiency calculation. The rest of the readings will be the same.
The 330 will also measure pressure and ambient CO, I am doing a video on those soon that will go over that. The probe for the ambient CO is so you can measure ambient CO at the same time you are doing a combustion analysis. That is somthing you cannot do with the 310. The 330 meter will do the same test that I demonstrated.
Sorry for the incomplete post. But so many different analyzers that testo has come out with. I recently brought the 330, and whats so confusing now is they now have the 310 that measure pressures and ambient CO, but the 320/330 you have to buy additional probes to take these same measurements. Can you give me some clarity please! Thanks!!!.
This is working fine on Pellet fuel measurements ? Can the wood moisture setting be changed ? How the bacarach insight plus works with Pellet fuel ? Thanks
![Natanael Cano - Amor Eterno [Official Video]](http://i.ytimg.com/vi/EO4prCs6WpM/mqdefault.jpg)
Can u do a video for the testo 310 describing what would be undesirable readings for each test and what would be the remedy
Thanks for the clarity, I will wait for the 330 video.
thank you great product love it, glad u explained how to work it manual doesnt go into detail like that
It will be close for pellet fuel. The Testo 320 and 330 have different moisture settings for wood, not sure if the Bacharach has those. Wood burning is much more common in Europe. All that these settings impact though is the efficiency calculation. The rest of the readings will be the same.
Why is there a delay when you shut the instrument off? It will range from 30 to 120 seconds.
I love this stuff!
Thanks Jim
Gotta love Testo!
The 330 will also measure pressure and ambient CO, I am doing a video on those soon that will go over that. The probe for the ambient CO is so you can measure ambient CO at the same time you are doing a combustion analysis. That is somthing you cannot do with the 310. The 330 meter will do the same test that I demonstrated.
Can the ambient CO test be performed in a duct or plenum with the blower running?
Sorry for the incomplete post. But so many different analyzers that testo has come out with. I recently brought the 330, and whats so confusing now is they now have the 310 that measure pressures and ambient CO, but the 320/330 you have to buy additional probes to take these same measurements. Can you give me some clarity please! Thanks!!!.
Nice job and video
badass tool
I would like to see where the probe is going into the cell.
Does anyone know of a video that shows that?
Thanks,
This is working fine on Pellet fuel measurements ?
Can the wood moisture setting be changed ?
How the bacarach insight plus works with Pellet fuel ?
Thanks
Dzieki za pokaz ... ;)
Can I use the 310 to test pressure valves on a furnace
How are the sensors replaced? In the field?
310, 320, 327, 330, who
HOW I CHANGE THE o2 SENSOR??