Hi PJ. And thank you for the Chitubox link. I Installed it and can you believe it, the ring was even bigger there. The size was all, X,Y, and Z all over 60 mm. I got the ring in correct size by resizing it in Cura from 100% to 47%. Now when i printed the ring it was in correct size.
Hi Pj ! Thanks for all your tutorials! Very Helpful! I have a Question: when i do Surface from Network, on the bottom of the rings, it creates bad artifacts that i can't get rid of.. Any suggestion?
My version or the way I have it opened doesn't seem to have all the same windows showing for things like commands and layers. How can I get my version to look like yours to more easily follow the instructions?
Hi PJ Chen. I am an amateur with this program. I make silver rings as hobby and i want to cast a signet ring. Your video have been best here in RUclips, thank you for that. You had the circle size as 16mm in the beginning and i assume that is the size of the final ring size. I used 24mm so the ring would be bigger. I finally succeeded to do this ring in Rhino 6. Then i saved it as .STL file. Then i loaded the .STL file to Cura, 3D slicer but size of the ring there is, 53mm x 20mm x 58mm. So that is too big for a ring. What happened? What did i do wrong? Please help. Thank you.
I do not use Cura, but whenever you are import export the file in between two softwares, make sure both software are using the same unit. I am guessing you may have mm in Rhino and have inch in Cura.
@@PJChenJewelryDesign Thank you very much for instant reply. I had mm in both, Rino and Cura , although dimensions in Cura was bigger. Strange. I tried to scale the object in Cura 50% smaller and now it looks better. I hope i can come to a solution. Thank you.
Hi PJ. Thank you very much for the tutorial. I'm a little confused about why the letters need to be mirrored if the piece will be directly 3D printed. Isn't the printer gonna build the whole piece exactly as how it is on the screen?
Do I have to chamfer / fillet if I print a wax model ? Because some fillets are too small for printing so if they are done by hand, would it be better?
Hi again. I installed PrusaSlicer and imported the .STL to it, and guess what? The dimensions of the ring in PrusaSlicer was also 56mm x 30mm x 60mm Very weird.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
These tutorials are the best! I'm self learning jewelry, and you are the best teacher I have
I'm so glad!
You saved my school assignment - thank you so much for the tutorial!
that is great!, which school are you in?
Copenhagen School of Design and Technology - Kea in Denmark :D
Cool.Hello from USA!
Thank you so much for sharing so many videos about Jewelry design!
You are so welcome! Glad you like them. please share my videos to your friends.
I love your videos PJ! very helpful and I always learn something.
thank you.
Hi PJ. And thank you for the Chitubox link. I Installed it and can you believe it, the ring was even bigger there. The size was all, X,Y, and Z all over 60 mm. I got the ring in correct size by resizing it in Cura from 100% to 47%. Now when i printed the ring it was in correct size.
still don't know why you had the size issue, but happy to know you find a solution for it.
So helpful. Super clear instruction as always!!
Thank you Kara.
Can you help me with the split with the top and the buttom on?
tank you ...it's very helpful
Best vdo. Helpoful vdo
Thanks for liking
Hi Pj ! Thanks for all your tutorials! Very Helpful! I have a Question: when i do Surface from Network, on the bottom of the rings, it creates bad artifacts that i can't get rid of.. Any suggestion?
not sure what went wrong without seeing the model. but you may want to check on your curves. make sure all the endpoint touching endpoint
@@PJChenJewelryDesign it's like all isocurves, converged on one point on the bottom, causing a non linear shape of the bottom ring :O
hello please can you show us how to thicken the lines/curves when working its difficult to see them in rhino 8 they are same like the grid
you can check in Option-View-Display Modes. pick up a mode you like to change. click on object- curve and change scale from 1 to larger number
@@PJChenJewelryDesign many thanks, .❤
awsome i need to try this
When I try to split it says split failed object may not be within tolerance of one another
My version or the way I have it opened doesn't seem to have all the same windows showing for things like commands and layers. How can I get my version to look like yours to more easily follow the instructions?
If your interface is different than mine. You may need to reset your toolbar. Type "toolbar" in command and "set defult"
Any chance its because I'm on a Mac? typing "toolbar" into command doesn't seem to do anything at all.@@PJChenJewelryDesign
@@shausen3 I think Option in PC is Setting in Mac. and you can find toolbar in there
Hi pj please make tutotial which top will Square in place of round
you can check out this one for angular top ruclips.net/video/OUOomNj-6iY/видео.html
very nice
Thanks
Hi PJ Chen. I am an amateur with this program. I make silver rings as hobby and i want to cast a signet ring. Your video have been best here in RUclips, thank you for that. You had the circle size as 16mm in the beginning and i assume that is the size of the final ring size. I used 24mm so the ring would be bigger. I finally succeeded to do this ring in Rhino 6. Then i saved it as .STL file. Then i loaded the .STL file to Cura, 3D slicer but size of the ring there is, 53mm x 20mm x 58mm. So that is too big for a ring. What happened? What did i do wrong? Please help. Thank you.
I do not use Cura, but whenever you are import export the file in between two softwares, make sure both software are using the same unit. I am guessing you may have mm in Rhino and have inch in Cura.
@@PJChenJewelryDesign Thank you very much for instant reply. I had mm in both, Rino and Cura , although dimensions in Cura was bigger. Strange. I tried to scale the object in Cura 50% smaller and now it looks better. I hope i can come to a solution. Thank you.
Hi PJ. Thank you very much for the tutorial. I'm a little confused about why the letters need to be mirrored if the piece will be directly 3D printed. Isn't the printer gonna build the whole piece exactly as how it is on the screen?
It is design for stamping wax.
PJ Chen Jewelry Design Thank you for the clarification!
Anyone know how to create the wax seal?
How did he delete the sides of the Trangile
uzbekla bomi????
why didn't the fillet work? was the radius too big?
I have several video discuss why fillet not working. you can search those video on my channel.
Cutting not working plz help
謝々、老師。
You are welcome!
Sir can you help me rhinoceros how to download?
You can download trail version for 90 days at www.Rhino3D.com
why the fillet didnt work on the ring's edges??
Hi Charu, there are several reasons. you can check out my video "why do fillets not working?" at ruclips.net/video/iWIk4emlqf0/видео.html
Do I have to chamfer / fillet if I print a wax model ? Because some fillets are too small for printing so if they are done by hand, would it be better?
you don't have to do fillet if it is too small, because you will have the fillet when you polish the metal.
Oh now! where is the stamp?
super
Super!!
还是很想问问怎么制作印泥
你可以用圓球拉出你要的形狀。 然後再用Boolean difference 指令。 就可以了。
Hii pj how are you
Hello~
@@PJChenJewelryDesign I want rings in square shape side disigns
@@vanganurudhanush7777 ruclips.net/video/cwHyPLEMXyA/видео.html
can you do with arabic caligraphy
do you have a image for referencing?
Split not working
Hi again. I installed PrusaSlicer and imported the .STL to it, and guess what? The dimensions of the ring in PrusaSlicer was also 56mm x 30mm x 60mm
Very weird.
If both software you use is in mm. that is weird. I use Chitubox for slicing. www.chitubox.com/
10+
老師能不能多一點中文的影片QQ或者有字幕也好
感謝你喜歡我的影片。因為我中文的觀眾太少。所以請人家做字幕一段時間之後就暫停了。不過還是有一系列的影片有中文字幕。你可以看看喔
啊啊啊，真可惜😭中文的真的好少，能找到這麼好的教學影片，只有老師了！
@@NEKO_14_4 ^_^