Been doing this a year and a bit always used 5 tones field one but I'm going to try this next time I'm out thanks buddy and I've subscribed happy hunting
Hi my friend im Really enjoying your no nonsense video's I usually use field 1 but going to use field 2 now .Taken your advice and sticking with 50 tones Loving them silvers 👍
Hi David Field 2 is a bit noisier but the results you get with sticking with it are rewarding just remember to go low and slow. Thank you for watching and good luck on your next hunt 👍
Late to the party, but a lovely video matey … might do a comeback to the fields after a couple of years break , and might invest into a Nox detector… take care
@@minelabnortherndetexpert1411 shame on the harp, still nice! I use 5 tones fld2 rec4 iron bias 7, maybe I should take bias down, but I already get fool by those hand forged nails. Cheers m8 and nice half crown!👍
very nice! great finds! been looking for a video where they swing the detector in the field and show how they pick a target! I am still new to the nox detector, and feel a bit frustrated about all the iron falsing! feel like I have to check every beep the machine makes (swing the coil over) and that takes a lot of time. Please make more videos as you did at the start of the video! Liked and subscribed! Thanks for norway
Great days finds mate, just subbed, i have to admit i havnt been using in all metal mode, would i be missing out on much at all, it does take alot of getting used to all the noises going on, and somehow ive got notches in blanked out by mistake so think i need to set back to default on field 2 that i also use in multi, not too sure how to set it back tbh, ive also got alot of ridge & furrow on my permission which always seems to be really hard to find any coins, any tips:) thanks again, Paul
Hi mate if you join the unearthed minelab user group on Facebook you will find the settings at the top on the page 👍 I do mention it in my videos but I can't remember Which one
Hi great info on the nox thank you when you say you are in field 2 do you use the stock field settings then just change the recovery and iron bias in that program
Hi Patrick thanks for watching yes feild 2 and just adjust to suit you field. the mode itself is not adjustable .stay safe and good luck on your next hunt 👍👍👍
Hi David been having trouble setting mode2 & 50 tones trying to get high pitch on low numbers .when in tone advance I can only get 1&2on the accept & reject button, is this normal ,
Love the hunt you had in field 2 50 tones. I haven’t used that one yet, but looking forward to it. Gary from USA , Grants Pass, Oregon
Thanks you Gary much appreciate you watching my videos thank you
Top hunt on a new promison as you never no what you will find brother nice coin that is top job brother
Cheers buddy 👍much appreciated 👍
Video so beautiful
I love your video
Bhh
Thank you 👍👍
Nice video mate some lovely finds there well saved 👍🏻 all the best #sehmetaldetecting
Cheers mate👍
Been doing this a year and a bit always used 5 tones field one but I'm going to try this next time I'm out thanks buddy and I've subscribed happy hunting
Thanks Mark much appreciated 👍 always good to try new settings field 2 is a bit more sensitive so will pick up stuff you mite of missed 👍
Good video with interesting finds. Len
Cheers Denise
Like 30 show my friend good hunt
Thank you my friend 👍👍
Hi my friend im Really enjoying your no nonsense video's I usually use field 1 but going to use field 2 now .Taken your advice and sticking with 50 tones Loving them silvers 👍
Hi David Field 2 is a bit noisier but the results you get with sticking with it are rewarding just remember to go low and slow. Thank you for watching and good luck on your next hunt 👍
Wow 2 silver Viccy threpances. Lots of great coins and what a stunner that George 4th silver. Great vid. Cheers 👍
Thanks mate much appreciated 👍
Late to the party, but a lovely video matey … might do a comeback to the fields after a couple of years break , and might invest into a Nox detector… take care
Great day detecting. Very enjoyable to watch. Never tried 50 tones.
Thanks Peter much appreciated mate 👍
Some nice finds tat , The george 1V is a beauty
Cheers mate
great hunt and the two vicky's that was stuck together was cool. but got to say nice crown. welldone 🙂👍
Very nice!!👍⛏🎧⛏👍
Cheers mate 👍
@@minelabnortherndetexpert1411 shame on the harp, still nice! I use 5 tones fld2 rec4 iron bias 7, maybe I should take bias down, but I already get fool by those hand forged nails.
Cheers m8 and nice half crown!👍
Great digging mate well done.
Cheers mate 👍
get on tat lad all the best ..
Cheers kev mate 👍
Hello mate can you do a video of your field 2 setting please 🙏
Will do mate as soon as my permissions are ready to get back on not done any video in a while should be soon 👍👍
excellent find my brother , great!
Thanks mate👍👍
Cracking video mate, some great videoing on the move & very informative too! Best wishes, Marcus
Thanks Marcus much appreciated mate good luck on you next hunt 👍
Great video. Ive not tried the 50 tones setting yet but im out tomorrow on promising land so i will certainly give it a go. New sub from me 👍
Thanks celtic glad you liked the film much appreciated mate 👍
Some nice finds Tat, I've bought Graeme's Nox so next time I see you I might be bothering you.
Cheers Bill 👍 no problem mate any time
One of your best videos and a great new field mate! Field 2 I’ll give a go. I have an iron infested section tomorrow using the 6 inch coil
Thanks mate 👍good luck for tomorrow
Nice one lad
Thanks mate 👍
very nice! great finds! been looking for a video where they swing the detector in the field and show how they pick a target! I am still new to the nox detector, and feel a bit frustrated about all the iron falsing! feel like I have to check every beep the machine makes (swing the coil over) and that takes a lot of time. Please make more videos as you did at the start of the video! Liked and subscribed! Thanks for norway
Thanks very much glad you like the video 👍I will do my best to make more like this 👍👍
That Jews harp was well fancy. You have good land up there Tat. You do well.
Thank you .it is a shame that Jews harp was broken 😢 not had one that fancy before
Hi Mate, unusual to see 2 silvers stuck together like that, love the half crown, that is one nice find..
Take care mate
Tom
Thanks Tom it was a good day much appreciated mate 👍
Great days finds mate, just subbed, i have to admit i havnt been using in all metal mode, would i be missing out on much at all, it does take alot of getting used to all the noises going on, and somehow ive got notches in blanked out by mistake so think i need to set back to default on field 2 that i also use in multi, not too sure how to set it back tbh, ive also got alot of ridge & furrow on my permission which always seems to be really hard to find any coins, any tips:) thanks again, Paul
Nice one buddy
Cheers mate
Hi mate, do you have a video for all the settings to use in field 2?
Hi mate if you join the unearthed minelab user group on Facebook you will find the settings at the top on the page 👍 I do mention it in my videos but I can't remember Which one
The way Those 2 coins were stuck together was cool! Great hunt pal 👍
Thanks mate much appreciated 👍
Hi mate , some nice finds my friend shame about all the crap in the first field , good video though enjoyed it mate ATB Rob .
Thanks Robbie much appreciated mate 👍
thanks great video very informative gives me more confidence to start useing the 50 tones more by the way that brooch thing looks like an animal head
I swear I was subbed to you. Re subbed mate and that was a cracking hunt. Loads of cool items there. Brilliant video 😁👌
Cheers luke much appreciated mate 👍 and thanks for watching
Well done tat
Thank you mate
Those are awesome. Sure look old! Hmmm I wonder if its hard to even finds specific dates on some stuff you find?
Thanks buddy some of the artifacts can be tricky to date sometimes👍
its a baw bee😊
Yes thats the one 🤣🤣🤣
Hi great info on the nox thank you when you say you are in field 2 do you use the stock field settings then just change the recovery and iron bias in that program
Hi Patrick thanks for watching yes feild 2 and just adjust to suit you field. the mode itself is not adjustable .stay safe and good luck on your next hunt 👍👍👍
Hi David been having trouble setting mode2 & 50 tones trying to get high pitch on low numbers .when in tone advance I can only get 1&2on the accept & reject button, is this normal ,
Yes David 50 tone is not adjustable like 5 tone is mate 👍just run with it like it is try it with all-metal off to start with👍
What setting do you have your recovery speed and iron bias on cheers pal
Hi Gordon I use a recovery of 4 and iron bias of 2 for the deep pasture thanks for watching the vid mate👍
50 tones is the way forward, really gets the maximum out of the nox in my opinion 👍
Yes mate you are right thanks for watching and good luck if you are out this weekend 👍
What Iron Bias are you using FE or F2?
Hi Kevin I use fe but only use a low setting f2 discrims to much out for my liking 👍
@@minelabnortherndetexpert1411 Thanks Buddy will give it a go
Never been confident enough to use field 2 - what sensitivity do you have it on? Great videothank you.
Hi mate I normally have Sensitivity about 22 or 23 but all depends on you ground really feild 2 is a bit noiseyer and a little more sensitive 👍👍
@@minelabnortherndetexpert1411 thanks how much deeper do you think it gets? I find field 1 already finds tiny small things like bits of barb wire
I don't think it is any deeper but definitely more sensitive for hammered coins and coins on edge 👍
Ye hammered mad like just about everyone else. 🤪.
well done with the silver buddy. shame the Jews harp wasnt complete. great video
Cheers mate 👍
Bawbea
Made me dizzy
Yes me too will not be trying that again 🙂
Bronze ring thing is possibly a Dorset Button!
en.wikipedia.org/wiki/Dorset_button
Cheers Steve 👍👍