DIY External Filter Using Two Plastic Jars Like Canister Filter
HTML-код
- Опубликовано: 19 авг 2024
- Hot to make aquarium external filter using two jars like Canister filter.
Subscribe : goo.gl/J4sgjG
In this video you will see two filter constructions with the same material. What is different is only in the input and output sections.
First, the filter media is placed in the inlet while the submersible pump is placed in the outlet section. Power head works to take (suck) water from containers that have filter media.
Second, the filter media is placed in the outlet section and the pump is placed in the outlet section. Power head works to push water into the container with filter media.
NOTE:
This is just an experiment, you can change all filter media and their arrangement based on your experience and your own method.
Materials needed:
1. Plastic jars
2. Aquarium transparent pipe
3. Pipe and hose connector
4. Ring verlop
5. Plastic hose
6. Duck end connector
7. Seal tape (Optional)
8. Submersible power head Yamana WP-77 (220-240 VAC/ 600L/H 5 Watt
9. Epoxy glue (strong and waterproof)
10.Plastic faucet
Other videos:
DIY Canister Filter using DC Submersible Pump:
• DIY Canister Filter Us...
Power head Yamano WP-700G:
• Yamano WP-700G Water P...
How to make DIY Canister filter with air exhaust hole:
• How to make DIY Canist...
Hang on filter Yamano MP-77:
• Hang On Filter Yamano ...
Your are the best in diy
Thanks Bro..
You made too much work for yourself. The pump in the tank with a prefilter would eliminate the need for the entire first container.
Music ??
PAal
@@HasnahKamilah 😂
I love this build and how you can see inside everything....It would be no mystery when you needed to clean it and i just love to see what's inside things and how they work!!! Great job
I will try to clarify on next video tutorial so people don't think there is anything hidden (without mystery). Thanks bro.
Ini pasti channel org Indonesia, tutorialnya sgt bermanfaat 👍
greetings from 🇲🇽 thanks for sharing friend
this is a great concept.
.can extend as many jars as you want according to your need
this is a great idea , I am sure a lot of people will be trying this out on there own setups great job thanks.
Great job. You nearly doubled the water by maybe a quart or another litter. I believe the first one is better than the second cause the first one looks like it's creating negative pressure so there is less chance of a leak while the second one is creating positive pressure and might lead to a premature leak.
Thanks a lot buddy. Matter of fact, I personally prefer the first method. I think it's more viable than the 2nd one....as far the end result and force are concerned.
Love this filter. I will try it with bigger jars. New subscriber here!
Foi o melhor video de filtro caseiro que ja vi ate hoje!!
Funny, my laptop speakers totally misses the bass line in the music track.
Here is a free tip. I would suggest you put the power head output as the last thing in line to the outlet pipe. This pulls in the water from the tank and keeps negative pressure in the system reducing stress and possibility of leak when media clogging occurs.
As for flow, the water should come in at the base of the unit, put standoffs and bioballs as a primary sludge settlement. Above the standoff section, coarse, medium and fine pad. Last in the path should be your biological before the water is pushed out the outlet. Biological media should always have just mechanically filtered water hitting it.
Cool though. Where did find the connectors, adapters, pipes and pump?
Very good advice. I will try at home to practice your method. Thank you very much.
Le parecerá una tontería pero estoy muy nostálgica y sus manos son igual de creativas como eran las de mi papito.
Me encanto su video muy explicativo gracias
Nice concept for a DIY filter. Might I suggest one larger canister containing everything to reduce risk of leak or failure with two canisters, and needing to join them together.
Maybe what you mean is this video ruclips.net/video/zeDPN0V_aVA/видео.html. Thanks for your good advice.
Nnice one and one can add more jars for better filtration. Great vid and well thought out for direction.
The only issue with this filter is if in a fishtank with detritus/sand etc the unfiltered water goes through the pump and then to the filtering media, something simple to protect the pump would be a small wall dividing the inlet connection and the pump and adding mechanical filtration before water is received into pump. this would allow the second outlet jar to house more biological media or more mechanical to polish the water.
Thank you for your good method. I will try then...
Me encantó ese diseño...lo voy a hacer
Why not just have the pump directly into the water and then will only need to use the one filter jar ??? Lot less work and expense
Itu sebetulnya 1 tabung saja tapi tabungnya yg agak tinggi lagi biar lebih banyak nampung media filter nya, & head pump nya dlm aquarium nyedot air didorong ke lubang bawah tabung dan outputnya lubang atas yg pipanya menuju aquarium jadi tidak kebanyakan pipa yg terpasang & kelihatan lebih Ringkas, tapi media filter terpenuhi spt bio ring, bio ball, karbon aktif, bio form, & Jap mat, kapas masing2 1 lembar jadi 1 tabung, cuma Pipa bening input & output yg ditabung nya saya buat permanen krn saya Lem pvc, terus kritik saya tabung satunya itu hanya terisi air yg nandon (tanpa diapa apain) kemudian disedot langsung dikeluarkan ke aquarium, maaf saya bukan menggurui tapi saya hanya beri saran sesuai apa yg saya punyai malah tabung plastik yg saya pakai bekas teko air minum yg tinggi kira2 40cm diameter 15cm saya umpetin dibelakang aquarium..
Amazing
Good bhai bhuta acha laga app ka video
Excelente 👏👏👏👏👏 ideia amigo vou colocar em prática!
In the first version (9:18) of the connection, the water flow is greater than in the second (9:57)!
!
Good point
Terus tambahan kritik saya, power head itu pada umumnya yg betul dipasang sebelum media filter untuk nyedot air dr aquarium terus masuk ke media Filter, kemudian air tumpahan dr Filter disalurkan pipa ke aquarium, lah ini Lucunya power head dipasang SETELAH Media filter ( tabung yg isinya bio ring & teman2nya), pasang Power headnya ditabung satu lagi airnya yg gak diapa apain alias nganggur disedot langsung disalurkan ke aquarium, aps gak keliru cara pemasangan PH nya coba tlg kalian Simak, Urutkan & amati pelan2 & baik2 proses/ prosedur filtrasi nya..??
Karena ilmu lu cetek, ga pernah main sump ya?
You are the best bro of all diy 😁
Superb bro I'm going to try this
Love your style!!
Excellent piece of work. Compliments to you. I would like to replicate it and see how it works in practice. Thanks Hasanah.
I would have one jar chemical (sponge) and the other on biological (bioballs/bio rings) please try this idea
Muy bueno like👍
Kalo toples diawal diisi air penuh pas dihidupin air bisa keluar,tapi kok gak mau ngisi lagi ya?gak bisa narik air dari aquarium ke canister.
good idea but 1 doubt
1 how to pull water in fish tank to filter box without motor
2 filter box to fish tank pushing water in with motor how to circulate water (in and out) in motor please explain
Nic video brother 🙏🇮🇳
What was the purpose of the little yellow valve/tap?
i used 2 jar as you shown i did same water flow from pump is working ok. but in 2nd jar water not come to fill from tank
1 jar for filter water from pump to tank
2 jar tank to jar but water not coming from tank why.? what to do .?
outlet work but inlet not
in outlet jar faucet is it complsory.? i not kept faucet
is it due to.?
In first model If inlet changed on top first jar and connector of two jars changed on bottom, can the water circulate?
Why not pushing the water on second jar and it will come from first jar. And power head will be on aquarium...
Can this work ? 😢
I like it
It's just an experiment. Thanks.
Good DIY..... Keep it up 👍
Great video and idea !
My only concern is it would be difficult to clean the media (when needed)
@@quantumhelix8668 i was thinking the other day to go completely to another level. Like mold and resin a strong bucket for DIY filter. Try to go full way proffesional filter
@@quantumhelix8668 the 2 reasons i can think for anyone to do a DIY filter is to either make it cheap and affordable and the second reason is parts. I saw and met many people whom bought external filter, them the filter had a part brake down and because the filter was discontinued, there were no parts available to fix the filter. Its a huge benefit for DIY and its a worthwhile investement.
I think a shared idea or template for everyone to use would be the best. Like a 3D print model or shared blueprint across an aquarium community would benefit all of us.
Twisted Helix
pre-filter the intake valve to catch the bigger stuff?
I’d think you’d notice a difference in output before catastrophic failure.
Hopefully.
great filter, could you please write the thread,.connector and hose size/ diameter? thank you
this idea is nice but very hard to wash filter
Kudos to you all how can I build my own filters for my catfish pound my water is really polluted
La segunda forma estaría errónea ya que la filtración no es de mayor a menor y en el perlon se acumularían todos los desechos.
Nice
Can i know how to get this all fitting?can i got the link where can buy..please reply 🙏🙏🙏
I think the second mode is better than first one.
Where do we get those transparent pipes online? I searched online and I see tubes but not pipes.
Hi.. please tell me what glue you have used and where I can get those connectors and and ring verlops. I have 5 tanks and can't afford to buy canisters for all of them. This will really help me.. please let me know where I can find these parts.
Thank you
MILLION DOLLAR QUESTION IS WHERE DO you get the sponge ????
Very detailed
I tried it buti didnt use the plastic faucet and the water level in the jar containing the pump keeps on decreasing...why?
Great DIY but might have been better to vocal as you went telling where you got jars,elbows, hose and pump }:-0
Why do u need a plastic faucet anybody pls explain... I didn't understand it's need.
What is the faucet for ??
Om mau nanya, selang plastiknya ukuran berapa ? Trus konektor pipa dan selangnya ukuran berapa ? Sama cincin verlopnya ukuran berapa om ? Mau buat juga nih.. 🙏
Great job,like it👍👍👍
What's the Plastic Faucet for?
Can someone tell me where do I get this Verlop ring ? Can’t find it anywhere
could you please tell us the best sequence of materials for conister bucket filter with bioballs?
😎 wicked build Boss 😎
Subscibed teh 👍
Quisiera saber las medidas de los diámetros de las piezas de pvc ojalá pueda decirme... Gracias
Buenas noches, ¿Sabe cómo se llaman esas piezas de PVC? Los diámetros me parece que son de acuerdo a lo que uno necesite, lo importante es la potencia de la bomba que irá en función con la cantidad de agua que necesite mover.
DIY Joey, eat your heart out!
how do water sucked in inlet
Where I purchase this type of connectors and pipess
Very nice diy video, what is the size of the hole? 1 inch?
Its the same idea of i think for my pool
I like this
sir one request can u give review on these
Es main konsa machine lagta hai
Can you please tell us from where you get the aquarium pipe, hose connector and ring verlop
Please share link to buy these accessories
great one! one question- where to buy those fitting? i could not find in local stores!
Bro can you provide us the link from where we buy these items i did not find online please help me out
Now all I need is 2 5gallon buckets
Setelah semuanya terpasang dan pompa di hidupin trs kran kecilnua di tutup apa di buka gan?
Ring verlopnya akuran berapa tu kang, plastic hose juga, termasuk connector, dan belinya dimana?. Thansk
What motor specifications you need for a 3*2*1.5 size tank ?
Qué tipo de bomba uso que no pudo destinguirla
Who was dancing while watching? HAHA
Can you list the things you have used in this
Perfeito .
How big the bottle should be per gallon?
brother you not define the size of ring verlop
Sorry. 1/2" inside 3/4" outside. Thanks
Where I Find Plastic Verlop Connector
Connectornya ukuran brapa mas?
why would you cut out how you primed the filter and got it running???
Because he have a something problem 😅
Sorry I did't record it, but if you want to see, you can watch the method from other video ruclips.net/video/fKpEzycpPF8/видео.html
I was just joking about the cgi thing, sorry...It's an awesome filter. You did a great job. Thanks for sending that link. new subscriber here thanks
Toples nya bekasa toples apa yach?
Superrrr 👍👍
Ye milega Kahan pe
The water intake/inlet is just too far for the suction of a smal pump. and since you put the pump outside the tank why did you used the submersible one instead?
Now that I think about it. Yeah why didn't he?
Size ringverlope and conektor plesee? ✌😀
can you tell me the name of materials did you use? thank you!
aq nyoba tapi pasti tiap bagian sambungan kok bocor gan
Bahannya susah dapetinnya nih, overall mantap lah
Bisa didapat di Shopee atao Toped. Cari aja di toko aquarium, pneumatic, dan hidrophonic.
Apa nama bahannya bang? Transparent pipe ya?
@@darkpathogen8657 Iya benar. Pipa aquarium transparan.
@@HasnahKamilah tq ya.. Cantik dan kreatif.. Sy subscribe.. 😊👍
Молодец
Здравствуйте не подскажете где купить такие соединения трубки фланцы
Kay aap is filter ko sell karty ho kay
hi i want to make a aquascape aquarium and i need to make an external filter just like yours but i`m new to this stuff and i would like to know what do you use the plastic faucet for
Hii
K
Mantap bro
Where u buy these box??
Has anyone done this on a larger scale? 5g buckets or more?!