How To - Change the REAR WHEEL of a Dualtron Victor scooter - Tyre and Inner Tube 🛴💚

Поделиться
HTML-код
  • Опубликовано: 26 июл 2024
  • How to change the tyre and inner tube on the rear wheel of a Dualtron scooter. Repair video for electric Minimotors Dualtron scooter - in this video we're going to show you how to take off the rear wheel, remove the old inflatable tyre and take out the punctured inner tube. To then install a new 80/65-6 Road with a new 10 x 2.50 inner tube with a 90/90 knee valve.
    We know that changing a tyre and repairing a puncture of a Dualtron (Thunder, Ultra, DT2, Mini, Etc) isn't always easy. So we hope that this tutorial enables you to do it stress free! Please let us know in the comments if you’ve been successful, we’d really appreciate your feedback (positive or negative) 💚🛴🔧💪 The MoovMoov team.
    ⬇️ If there is a product that’s featured in this tutorial that you need to buy, you might find the link below :
    -
    Available on Amazon :
    🛒 ✅ Inner tubes for Dualtron Victor (10x2.50 bent valve 90/90) : pxlfy.me/gGeFNo
    ---
    👉 If you are interested in the electric scooter repair and maintenance sector and want to follow our work, you can subscribe to our channel by clicking on this link :
    / @moovmoov.global
    ---
    ℹ️⏱ Here are the main steps in this video to install an inflatable 10 inch tyre (85/65-6 Nylon) with a 10x2.50 inner tube knee valve 90/90 for a Dualtron Victor scooter :
    00:00 - Intro : repairing back wheel Dualtron Victor
    00:49 - Remove the mud guard
    03:13 - Removing the arm from the rear fork
    04:31 - Removing arm : Technique 1
    05:50 - Removing arm : Technique 2
    07:14 - Separate the rear wheel from the motor
    09:49 - Take off the two rim halves
    10:28 - Take out the inner tube + tip
    11:38 - Fitting the new Road 80/65-6 tyre
    12:12 - Placing rims on the tyre
    13:59 - Installing the repaired back wheel on the motor
    15:30 - Screwing the rear wheel onto the scooter
    17:18 - Tightening the tyre (not compulsory for the rear wheel)
    17:45 - Reffiting the Dualtron rear fork
    20:49 - Tyre pressure Dualtron Victor
  • ХоббиХобби

Комментарии • 30

  • @moovmoov.global
    @moovmoov.global  10 месяцев назад +1

    Hey! If you need to buy the same inner tubes as in the video (sold on Amazon UK):
    🛒 ✅ Inner tubes for Dualtron Victor (10x2.50 bent valve 90/90) : pxlfy.me/gGeFNo

  • @TheHungaryPSB
    @TheHungaryPSB 8 месяцев назад +1

    Nagyon jó videó felvétel szép munka 👍
    Egyedül a végén a kalapálás ami nem tetszett, hogy olyan nehezen lehetett visszatenni a jobb oldali villát..
    Ettől eltekintve nagyon szép munka!

    • @technodj4867
      @technodj4867 2 месяца назад

      Nem kell aggódnod, én is kicseréltem a gumikat és van hozzá az a lehúzó szerszám, nem kell ütni!

  • @shvedsky
    @shvedsky 2 года назад +1

    Nice 👍🏻

  • @Rubin_stein957
    @Rubin_stein957 2 месяца назад

    Cool video, real install 100/65 on victor luxury plus?

  • @michaelnguyen6471
    @michaelnguyen6471 Год назад

    Good video!

  • @okyung1813
    @okyung1813 6 дней назад

    victor psi??

  • @RideWithAnthony
    @RideWithAnthony Год назад

    can you do Dualtron eagle pro tire change?

  • @MRshrir1985
    @MRshrir1985 Год назад

    CAN YOU USE INNER RUBE 10X3 ?

  • @RideWithAnthony
    @RideWithAnthony Год назад

    I put the tire back wards does it matter ?

  • @foxrex351
    @foxrex351 Год назад

    What the name of the extractor tool?

  • @Woje00
    @Woje00 Год назад

    Insead of heating screws, just use the gun with hammer mode, same like for the cars but builders mode I would said, it tooks me 60 secounds to screw them out

  • @duskrider1724
    @duskrider1724 Год назад

    I need to reattached the rear mudguard on my Dualtron Achilleus but the wheel seems to be larger than the Victor and blocks the mudguard screws. Any suggestions on how to remove them? I don't think the ratchet strap trick will create enough space.

  • @SeekerKnight
    @SeekerKnight Год назад

    I was wondering…
    Do I need to apply a fresh application of blue locktite to the screws?
    And
    Is there a specific torque needed for the wheel screws and the arm bolts?

    • @SAVY_JAX
      @SAVY_JAX 10 месяцев назад

      I have recently discussed this with the minimotors staff. “No” to both questions.

    • @okyung1813
      @okyung1813 6 дней назад

      have to heat gun?

  • @Chankot5
    @Chankot5 4 месяца назад

    🗿🔥👍

  • @jeksilog6629
    @jeksilog6629 2 года назад

    how many seconds do you use the heat gun per screw?

    • @MinimotorsUnitedKingdom
      @MinimotorsUnitedKingdom 7 месяцев назад

      1800 Watts heat gun, 10 seconds each end, repeat until soft enough to come out

  • @Xpecialist
    @Xpecialist Год назад

    Is 100mm 4mm allen enough?

  • @kevinfuenzalidapugin8817
    @kevinfuenzalidapugin8817 2 года назад +2

    Police took my victor. I feel like im gonna hurt children

    • @giovannifrancescodipasqual3736
      @giovannifrancescodipasqual3736 2 года назад

      Did children report your victor to the police??

    • @jordanfgfox7237
      @jordanfgfox7237 Год назад

      Ooof

    • @SeekerKnight
      @SeekerKnight Год назад

      With that attitude it’s no wonder!
      Grow up and take your lumps like a man. That childishness is likely why they took it! I suppose you were gently covered uiding in a sage and responsible manner like ke a perfect little angel? Or perhaps more the opposite?
      Cops don’t get out of bed with the purpose of picking on anyone in particular. If you got your scooter taken, there was likely a reason. As for you wanting to “hurt children”… I think a public statement like that may get their attention with you as a possible TERRORIST!

  • @marinacorvi854
    @marinacorvi854 Год назад +1

    :(

  • @M-M-M-M
    @M-M-M-M 8 месяцев назад

    Can you do it any more complicated than this dude here? 🤣🤣🤣