Gas Can Nozzle Replacement
HTML-код
- Опубликовано: 5 сен 2024
- This is my rant on newer Gas Can Nozzles and replacing them with a more traditional style.
Doer, Fixer, Maker
Man of Many Talents, Master of None
Grumpy Art Provided by DisneyClips.com
www.disneyclip...
Music provided by Bensound.com
www.bensound.com
I have actually awakened in the middle of the night trying to figure out how to modify those stupid new spouts! Thank you for your video!!
I also took it one step further. I removed the red thing, then wrapped heavy duty " T-REX" duct tape around the spout to hold the upper spout down. Since fuel doesn't leak all over the place now, duct tape isn't getting sticky.
Just found your channel. Way to go grumpy dad. From another grumpy dad.
Didn't even know these replacements existed. Thanks for the tips grumpy dad
Good to hear there are replacement spouts, however the explanation was 23 minutes too long… get a VP racing jug for $30 and you will be good to go
I always cut that knuckle buster off of the can as well as the lock tab off of the cap. My philosophy is, if you need all of those safety features, you shouldn’t be using that equipment in the first place! Leave it to the adults.
Lol.
I always save all still-usable nozzle-parts from gas cans, in case I come across other gas cans in the future that have cracked or missing spout-parts. Plus of course, you will have extras to share with your friends if their own gas cans have any parts that need replacing or upgrading. :D
I have a nozzle similar to the one you show at first. That nozzle sucks. I replaced mine with one similar to the old fashioned one, but the gasket disintegrated into the gas. I wish they'd bring back the old nozzles and plastic cans.
Love your videos, maybe a bit less talking that doesn’t really impact the upgrade. Could probably reduce the video by 1/3. But thanks, the new gas cans suck and those stupid new “safety” spouts have to add to the cost. And no, they are not safer, they slip off the fuel tank, leak, spill, well, you get it.
Thanks for posting,good post. Thumbs up and I subscribed
It was designed by a paper pusher who had a piece of paper saying he was an engineer. However, a piece of paper does not make a person an engineer, genetics does. You are either born an engineer or you will never be one. You only need to go to school to refine your natural abilities. Engineering is a peculiar way of thinking in which you can see possibilities that others can’t see, and the ability to convert your vision into reality.
Absolutely correct.
Book smarts but no street smarts!
I don't think you would "Compromise" the seam (Since it is a very good welded seam) by putting that vent in the middle up high but still in the back of the can, so fuel won't come out the vent when filling. Great Video.
Thank you.
I think that part of his concern may have been that the seam might interfere with a leak-proof seal for the air-vent --- he says about his wanting the vent-assembly to "fit down flush" against the can's surface. Yeah, yeah --- obsessive-compulsive, but this is flammable gas that we're dealing with here, so you really can't be too careful around it.
Great video
Use needle nose hemostats to reach the burr inside or fine needle nose pliers.
I thought of that, too, or tweezers.
I love this guy lol
I bought a very similar kit too from Amazon and installed it on my gas cans. A few weeks later the rubber gasket on the flex spout had deteriorated and caused my cans to leak! Apparently, the gasket rubber material was not fuel stable! Check your gaskets!
I just went through the gasket falling apart in the gas. So frustrating!
To slow getting to the point!
Look into the camera - not your monitor
I saw that too. It was my first time shooting like that. I need to work on that. Don't worry I won't quit my day job.
All those various easy pour spouts are garbage. The plastic is cheap and the rubber gaskets always fail. You’re lucky to get a year before they start leaking too. It’s better to just buy a Just Rite or Eagle and be done with it.
Could have been condensed to 5 minutes
i felt the same way.. 25 minutes of my life I'll never get back..
pilot hole??????
You're better off with the EZ Pour replacement spout. Or better yet, get a Justrite metal safety can type 2.
Nice!, thanks for the tips.
Just get a VIP 5 gallon Racing Fuel Jug. Problem solved!
Yeah, I am familiar with that can, two of my uncles us it for their Drag Cars
like the T shert say JUST DO IT
The engineers who designed these so-called safety nozzles are out of touch and utterly incompetent! Any FUNCTIONING ADULT knows how to properly use a gas can and FULLY UNDERSTANDS the consequences of misuse, but the “Nanny State” tends to use it’s overreaching power to treat us like little children with idiotic (and more dangerous alternatives that pose more significant threat to safety with defective and ill-made components) decision making and I’ll-thought out shoddy designs!
I had to retard my timing and felt bad about it too. It is what it is. Then I fed my bitch some dry dog food.
this video could be done in 2 minutes but instead you just keep dragging on and on...... stop wasting other people times with your none sense trash talk
Thanks for watching. You are correct, I really didn't even need to make it, there are lots of them out there but it is something I wanted to try and well... it is one of my best performing videos and I have no idea why. Maybe it is the Rant and Trash talk, not sure.
Sounds as if the bearings are going in your evap. cooler, bro..
Yep. on the to do list
5:25 mins in and still no spout installation. You waisted time talking too much. Sorry I clicked out...
Cool you must be a virgo
Aries
talk too much
I made it a rant video so yeah I know it is a lot of talking. But I have other videos of just my hands and doing the work from a first person point of view and I have had people complain about that too. So, oh well can't make everyone happy. Don't worry I still have my day job. Thanks
Muppet hands. Just don't enjoy watching your hands. Really.