I really like your LC 200 Front and rear bumper/swing arms. I have been working with Bud Built & they have great things to say about your build quality. I really like the smart use of Aluminum in your product to keep down weight.
Sold out, nice! Congrats. I will be watching for more, this looks like a good potential solution for my 2022 Colorado ZR2 that, funny enough, I bought from Winner in Colfax. You should get your accessories in their showroom!
When will we know that you have finalized the hitch design for max ground clearance that you spoke of? I think any improvement here would be welcomed by all of us. Look forward to getting one for 5th GEN 4 runner if that improves. Thanks guys.
The only issue I see is it covers the license plate up. Might be an issue for some police officers who pull behind. Other than that it’s a great alternative to a full bumper swing out
For sure. If someone plans on running this 24/7 then relocating the plate and adding a light would be quite easy. We have license plate relocation kits for our normal bumpers that would work.
It was the only vehicle we had at the shop that day that had an open hitch receiver to display the rack. Rest assured, this system didn't end up on a Gladiator. 😃
Depending on the specific vehicle and carrier configuration, a camera relocation may be required. For our Land Cruiser full bumper applications we have a backup camera relocation kit available.
If you have plans to remove the hitch carrier off and on then I'd recommend using a wireless backup camera system. They are pretty affordable and often clearer than the OEM units.
Since the bumper could be detached, wouldn't that just leave more possible error for wobbles? And why is the ice box mounted so high as if it's about to get hard to reach into if you are in smaller height?
We have a great anti-wobble system included with the hitch to minimize wobble. There's a separate video that shows how to set it up. As for the cooler, it is set on our tray accessory. You can put whatever you want up there. It wasn't designed specifically for coolers. As with most offroad accessories, you may need to carry a small step stool to access things that are out of your reach. It's quite common in the overlanding world when you drive lifted vehicles.
@@dissentoffroad Sounds good! Sorry for the late reply. I see you are located in California. Is it possible for me to come by in person to pick up the hitch mount after placing the order online? I am also located in California, Los Angeles.
We have the wider center piece in powdercoating. When finished we will test it on full-size trucks and wide SUVs like the Armada/Tahoe. So yes, we will have one available for you. :)
When you run a spare tire carrier, the plate gets moved to just below the frame of the carrier. You can see photos of this on our webpage and Instagram. The swingarm accessories are the same for this hitch system and our regular bumpers.
Agreed. For more advanced wheeling you should run a high clearance bumper. For everything else this works great. Price will depend on configuration but will start at a comparable rate to others on the market.
I really like your LC 200 Front and rear bumper/swing arms. I have been working with Bud Built & they have great things to say about your build quality. I really like the smart use of Aluminum in your product to keep down weight.
Thanks mate! It's a tough balance between long-lasting durability, weight and price.
Sold out, nice! Congrats. I will be watching for more, this looks like a good potential solution for my 2022 Colorado ZR2 that, funny enough, I bought from Winner in Colfax. You should get your accessories in their showroom!
We haven't started a run yet so there is still time to get on the waiting list! Hahaha Winner has pretty good deals for such a small dealer.
Fantastic! I’ve been planning to get a hitch tire carrier and this fits the bill. I’ll be one of your first orders for my ‘23 4Runner!
Very cool! We have a 22' Lime Rush T4R we used for durability testing and it looks awesome fitted to it!
Going to check it out for my 2006 Jeep commander
When will we know that you have finalized the hitch design for max ground clearance that you spoke of? I think any improvement here would be welcomed by all of us. Look forward to getting one for 5th GEN 4 runner if that improves. Thanks guys.
Hi Scotty, We have a taller offset center piece that will raise the swingarm system up approx. 4".
The only issue I see is it covers the license plate up. Might be an issue for some police officers who pull behind. Other than that it’s a great alternative to a full bumper swing out
For sure. If someone plans on running this 24/7 then relocating the plate and adding a light would be quite easy. We have license plate relocation kits for our normal bumpers that would work.
Im curious to see this in action
what about 360 camera relocation? and are you making them with the bigger hitch opening at all?
Need this!
Are u guy gonna release a bumper with swing out for a gladiator
At this time we have no plans for any Jeep products but that could change down the road.
What the gladiator needed was less departure angle,
It was the only vehicle we had at the shop that day that had an open hitch receiver to display the rack. Rest assured, this system didn't end up on a Gladiator. 😃
Here is how it sits now. instagram.com/megamikes/?img_index=10
Is there a tire carrier that will keep the back up cam functioning?
Depending on the specific vehicle and carrier configuration, a camera relocation may be required. For our Land Cruiser full bumper applications we have a backup camera relocation kit available.
If you have plans to remove the hitch carrier off and on then I'd recommend using a wireless backup camera system. They are pretty affordable and often clearer than the OEM units.
Since the bumper could be detached, wouldn't that just leave more possible error for wobbles? And why is the ice box mounted so high as if it's about to get hard to reach into if you are in smaller height?
We have a great anti-wobble system included with the hitch to minimize wobble. There's a separate video that shows how to set it up. As for the cooler, it is set on our tray accessory. You can put whatever you want up there. It wasn't designed specifically for coolers. As with most offroad accessories, you may need to carry a small step stool to access things that are out of your reach. It's quite common in the overlanding world when you drive lifted vehicles.
@@dissentoffroad Sounds good! Sorry for the late reply. I see you are located in California. Is it possible for me to come by in person to pick up the hitch mount after placing the order online? I am also located in California, Los Angeles.
@@johnyang6969 Yes. You can pick it up.
Will the swingouts clear a dropped F250 tailgate??
We have the wider center piece in powdercoating. When finished we will test it on full-size trucks and wide SUVs like the Armada/Tahoe. So yes, we will have one available for you. :)
Can this work for a Toyota Sequioa's lift up tailgate?
How this swing out hitch carrier weighs?
And where does the rear license plate go?
To hell
When you run a spare tire carrier, the plate gets moved to just below the frame of the carrier. You can see photos of this on our webpage and Instagram. The swingarm accessories are the same for this hitch system and our regular bumpers.
I’m in. How much? 07 fj crusier.
We haven't finalized a price yet but it will be competitive to what is currently on the market. We hope to have it up on the website in a week or so.
A little low for offroad. How much, tacoma.
Agreed. For more advanced wheeling you should run a high clearance bumper. For everything else this works great. Price will depend on configuration but will start at a comparable rate to others on the market.
Will this work for a Ford F150?
Yes. You can adjust the swing arm distance to clear the tailgate.
Anyone running these on a Subaru Forester?
Who dosen't enjoy tire dirt in your food? Me, thats who!
That's boring. :)