2016 Tiguan Valve cover reseal
HTML-код
- Опубликовано: 8 май 2023
- "How to Reseal Your Valve Cover - DIY Tutorial (2016)"
~~ We post every Tuesday @2pm EST. ~ Tools Listed Below ~~
INSTAGRAM ~ / gremco_garage
TWITTER ~ / gremco_garage
RUclips ~ ruclips.net/channel/UCbmQ80TL...
If we helped you out and feel like sending us a tip.
Coffee Money ~ account.venmo.com/u/kurt-gremer
Coffee Money ~ www.paypal.com/paypalme/Kurtg...
~~Tolls for most job~~
Impact Driver ~ amzn.to/3wtZ0K3
Small Impact driver ~ amzn.to/3j25zRg
Electric Ratchet & Batt ~ amzn.to/3wz3Aa9
Magnetic tray ~ amzn.to/3DgazZm
Basic hand tools ~ amzn.to/3JgIpRD
Box wrench set ~ amzn.to/3wtWR0W
ScrewDriver set ~ amzn.to/3WCspfR
Shop towels ~ amzn.to/3XWUOOL
Torque Wrench ~ amzn.to/3R4ZdwV
Electronic Torque Wrench ~ amzn.to/3JiBgjQ
Allen Sockets ~amzn.to/3HczOga
Torx Sockets ~ amzn.to/3j9zV4f
Torx Bit Socket ~ amzn.to/3HyW3yu
Hook & Pick Set ~ amzn.to/3j6zEPA
Gloves ~ amzn.to/3j0nPdL
Triple Square ~ amzn.to/3kCSOwF
Ball Joint Separator ~ amzn.to/3XZpRcN
100-Lumen LED Pen Light ~ amzn.to/3XV4BVA
O-Ring Removal ~ amzn.to/3j4U638
GEARWRENCH 4 Piece ~ amzn.to/3HuDR94
GEARWRENCH 12 Piece ~ amzn.to/3H1ZSdK
POWER PROBE ~ amzn.to/3HxvF7V
⚠ DISCLAIMER:
While Gremco_Garage strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. Gremco_Garage is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
8:10 this guy would be really good at decorating cakes
This video breathes "competent violence." Like the guy knows what he's doing, he's not doing anything wrong, but it just feels... rough.
Haha, had the same reaction. The way they laid that bead of sealants though, you could tell they know what they’re doing.
I have a 2014 vw Tiguan I have to replace mine at the moment wish you were in NC
hi, i have a3 8v 2017 ea888 mqb gen 3. looks very similar to mine. does this affect timing in any way ? i notice you didnt release tension on the chain. can i just pop off the cover like you did and it wont affect the chain or timing in any way ? thank you
Will this cause oil to get onto the spark plugs and for to misfire?
This channel is awesome deserves way more subscriber's
Thank you that means a lot. Share the channel if you know anyone that it could help out.
What kind of oil did he use to lube the engine? Also this video is good
What did you set the digital torq to bolt the valve cover? What's the nm or lbs? Did you need something under the car to hold the engine due to the engine braket removal?
is this the same procedure for the 2017 passat 1.8t ? i think i need to do mine showing a lil moist around the valve cover
👍👍👍
How long it took to replace the valve cover?
Nice narration comments! Also, that tech appears to be working crazy fast. How much faster is he than the book time for this job? Like 3x faster? Just curious.
Boom time is 6hrs
Do you have to remove the engine mount bracket? Also, did you put cylinder 1 in TDC?
You do not have to do either of these things.
What kind of grit or name if that yellow pad used to clean the cradle/valve cover??
it's an adhesive remover pad. They're not abbrasive to the metal, and some are even for paint use without scratching the body.
How much does this usually range from due to the part and labor?
Just got mine done roughly 1700
Sorry don't you have to hold or lock the camshafts with special tools
No
How long should this job take? My mechanic is trying to rip me off.
On this retarded German suv it takes a couple hours.
This job pays 5.1 hours labor
Did you have to drain the oil first
You do not have to drain the oil to do the valve cover reseal.
It will piss out a bit from the dipstick tube due to how the oil level works.
How do you keep the cams and timing in check?
Yes I was wondering the same thing, I am about to have to do this all for my girlfriends car. The Mechanics said it’s a 8-10 hour job and quoted just under $5k for it, but this guy made it look way too easy to take that long (which I do know that’s because he has spent hours, days, months and years of his life building up his expertise but still I know when a mechanic is trying to pull a fast one). Wonder how long it should actually take? Hopefully he can throw us a reply, never the less he gained a follow from me 100%
Yes I am wondering this, it doesn’t seem like the cams or timing is touched at all.
I would just mark the chain and cans with a paint pen . I know it’s not the “correct” procedure but I’ve done hundreds of these and as long as you leave the chain and cam bracket alone the timing won’t move
@@GremcoGarage thanks for the insight. I’ve done the piston soak but the resealing has me a little spooked. I’m a diesel mechanic by trade and this little 4 cylinder has me shaking lol.
Do you have to have #1 tdc or just remove the cover and be careful not to bump the cams or sprockets.
Yo why so fast 😂
Flat rate efficiency is money