my friends and i made this for our school's project and we did it successfully! our teachers complimented on us and they chose us to be the best group! thank you, diya funplay! i love you so much muach xixixi 🥰😋😝💌😘
Yes you're right. Good observation. One of the blade slipped slightly while fixing with hot glue gun (went out of angle limit). Glue went solid before i could adjust it. So left as it is. Thanks for mentioning.
Sir,I have to show this in my school and I m not able to carry table fan or dryer so can u plz tell me where can I fix battery in this according to ur discription plzzz reply because I have only 2 days to make this 🙏🙏
@@parirajput6417 Yes, i will make a video as soon as possible. But, connecting a battery and a switch is relatively easy. Just connect one end of the wire to a motor. There will be two wires. Wire for positive will be red and the wire for negative will be black. Connect one side of these wires to the motor and the other side to a 9Volt battery. You will need a battery cap for this battery to connect the wires. And finally, cut the positive(red wire) alone somewhere in the middle and connect a switch. Connect the ends you had cut to the two terminals in the switch. If you still have doubts, let me know and i will upload a video tomorrow.
Items needed for this project: Cardboard, Thermocol (only if you want a sturdy base) hot glue gun wires, led bulbs, switch, dynamo, generator or dc motor (as you need) scissors.
That is a small pulley attached to the motor shaft. That is really not needed for this project. Some dc motors have gear wheels and some have pulleys and others may have wheels too. You can ignore it.
VERY GOOD , BUT ... I have tried with a dc motor and it will not light up unless I spin the blades at almost 1000-RPM using a pc blower , how did You get it right with such a slow turn rate on the shaft ?
Sorry that i missed out the dimensions in this project. For the turbine blades you can use a cardboard of size 30X14cm and the tower should be 40 cm tall. You use the other dimensions accordingly. Please let me know if you need any other clarification.
Items needed for this project: Cardboard, Thermocol (only if you want a sturdy base) hot glue gun wires, led bulbs, switch, dynamo, generator or dc motor (as you need) scissors.
Fun play time ki bacchi tere Jo video hai na sare link mein dal deti hai tu khud dikhaya karna sab kuchh itna information deti baithe ho usse achcha to vah acche to vah Riaz fan play time
@@diyasfunplay i did same as you shown in the video. But after switch on the table fan and took the project to front of table fan,Only the motor is running and the light is not working.
Check and make sure that all the connections are correct. Check your generator/dynamo specifications. It should be a "low rpm generator". Normal generators will need more than 1500 rpm to generate electricity. But low rpm generators can generate electricity at a very low rpm. The turbine in my model rotates at around 80- 100 rpm. Only low rpm generators can generate electricity at this rpm. If all connections are correct, then the problem could be with the motor (not being able to generate enough electricity). Also make sure to use a low watt led.
Wind turbine explanation:
ruclips.net/video/gNGyMtVf4iY/видео.html
Itna mehnat kaun karega
this is perfect for my simple machine project (wheel and axle)
All the best 👍👍👍
my friends and i made this for our school's project and we did it successfully! our teachers complimented on us and they chose us to be the best group! thank you, diya funplay! i love you so much muach xixixi 🥰😋😝💌😘
Great job! & Thanks for sharing! All the best
i've finished this and i won a competition
Well done 👍👍👍
Same
Thank you very much it helped a lot in my project
Great 👍😊😊
I got first position in my science because of your hard work thanks a lot
Well done!
This is perfect for a a hool project
school*
Thank you sir. It helps me for making best science project in my science fair
All the best 👍👍👍😊😊😊❤❤❤
Thanks i will use this for our project wind mill to our subject CPAR
Good luck!
Awesome bro
Thanks 🤗
By the way, it was amazing
Thanx bro for idea
Thank you too
You are great bro speech and windmill
Woah ur so fast at making things!
It's a filter that speeds up the video
The video is speeded up dude
@@sha-warma ikr
Awesome blade shape
Thanks
Wow wow that is cool i mean press to make it out of cardboard you get a prize you got five stars
Thanks a lot
Good
Thanks a lot 😊😊😊
it is better to make it help people 💪💪💪👍👍👍👉
Thanks for the visit ❤❤❤👍👍👍😊😊😊
thanks
You're welcome!
interesting 😲
Thanks a lot 😊
Thank you 🙏 nice project is project ki vajah se mujhe first prize Mila
Great 👍👍👍
nice job! i love your works... i've finished this work and i've presented the work to my whole class and i got the best category 😍🥰
Awesome, thank you!
Nice
Thanks
Really good for school project
The thing I was searching for
beautiful
Thank you! 😊
wow it's awesome!!!
Thank you! 😊
It's the best design for my project thank you sir for your wonderful project 👍👍☺️😊😊❤️🙏
Thanks a lot
👍👍👌
Thanks 😊
Its binod .. not binoy
Superb
Thanks...
Its ok sir
wwoooww its like a real one ,,,😍,,,
i also make a solar and wind turbine model power house ,,,,
Thank you very much 😊😊
Amazing😍😍😍😍😍😍😍
Thanks 😄
I am like
Thanks a lot
The wires you are showing in the motor can be found at any electrical shop.
Btw. It's amazing
We are making lighthouse so we need wind mill for say that the wind energy claimed at lighthouse and give light ti boats thanks
All the best
Very nice 👍🙂
Thanks
Wonderful
Thank you
Thank you so much this video helped do much for my school project thank you 😊👍👍👍
You are welcome 😊
Excellent work
You are a genius genius 🙏🏘️🏘️
Thanks a lot....
how to put motor and generator together
I have used only a generator. I would have mentioned the generator as motor in my comments, But, I have used only one generator for the wind turbine.
Nice job! What are the specs of the capacitor soldered to the motor terminals?
Hello sir! Could you please tell me the specification of the motor? Which one should I buy to make this working wind turbine?
You need a very slow rpm dynamo for this turbine. Somewhere between 10 to 90 rpm. Lesser the rpm, better will be the output.
Such as well
Can i use dc motor in this instead of dynamo
Yes
Why a cone ahead
To reduce drag at high winds 😊
there is weight on blades
try to measure the blades
one of them isn't in the right place
Yes you're right. Good observation. One of the blade slipped slightly while fixing with hot glue gun (went out of angle limit). Glue went solid before i could adjust it. So left as it is. Thanks for mentioning.
Miss is this phenomenon can be called as uniform circular motion?? I have to do a model regarding uniform circular motion can u help me pls....
Sir, my windmill is moving with speed but the motor is of 9v but can the motor glow a 12v led bulb plss tell me
It will work, but the LED brightness will be low.
Yess sir it worked
Name of motor?
@@diyasfunplay Yes Sir Exactly
Can you tell me the name of the motor you used to generate electricity
Slow rpm dynamo (can generate power at low speeds)
@@diyasfunplay thankyou
Sir,I have to show this in my school and I m not able to carry table fan or dryer so can u plz tell me where can I fix battery in this according to ur discription plzzz reply because I have only 2 days to make this 🙏🙏
You can fix the battery and a switch at the tower base platform (bottom cylindrical structure)
@@diyasfunplay ohhh thanku sooo much sir
Sir can u plz make a video on this because I have never done this type of work so I have no experience and no one is here for help
@@parirajput6417 Yes, i will make a video as soon as possible. But, connecting a battery and a switch is relatively easy. Just connect one end of the wire to a motor. There will be two wires. Wire for positive will be red and the wire for negative will be black. Connect one side of these wires to the motor and the other side to a 9Volt battery. You will need a battery cap for this battery to connect the wires. And finally, cut the positive(red wire) alone somewhere in the middle and connect a switch. Connect the ends you had cut to the two terminals in the switch. If you still have doubts, let me know and i will upload a video tomorrow.
@@diyasfunplaysir help me please... How can i connect led, motor, switch simultaneously...
Btw wt have u attached with the dc motor
Its a capacitor to make the circuit healthy
Where can I get them
Anna that white paper name enna anna
It is called butter paper. You can also use tissue paper.
Its amazing but add a cm
Name of your glu gun
Themisto
How big is the circle the blades are attached to?
hi can u tell how to connect a motor with a battery for this model
Sir can you Name the material you had used in it
Items needed for this project:
Cardboard,
Thermocol (only if you want a sturdy base)
hot glue gun
wires,
led bulbs,
switch,
dynamo, generator or dc motor (as you need)
scissors.
My motor in 12v does it work
Yes it will work
Can I use a dc motor for the windmill??
Yes you can.
where can I find the measurements? Btw an Amazing build!
What are the lights called and where can I purchase them. Please get back to me as soon as possible.
They are led strip lights. You can get them in electrical shops or online.
Amazon link: amzn.to/449snSc
Thank you
@@diyasfunplaythank you so much
Hello sir! May I ask what that blue piece at 5:14 is called and where I can get it?
That is a small pulley attached to the motor shaft. That is really not needed for this project. Some dc motors have gear wheels and some have pulleys and others may have wheels too. You can ignore it.
You haven't mention measuments of wing.
Length of each blade is around 30 cm
Sir what is the tentative rod size?
Make it at least 10cm longer that the blade, else the blade tips may hit the objects below.
@@diyasfunplay thank you..
VERY GOOD , BUT ... I have tried with a dc motor and it will not light up unless I spin the blades at almost 1000-RPM using a pc blower , how did You get it right with such a slow turn rate on the shaft ?
How to make this house
ruclips.net/video/GtGQB3DvDcg/видео.html
Sir can you tell me the measurements of card boards that you used?
Sorry that i missed out the dimensions in this project. For the turbine blades you can use a cardboard of size 30X14cm and the tower should be 40 cm tall. You use the other dimensions accordingly. Please let me know if you need any other clarification.
Hi can i adgust the height of cardboard to around 30 to 35 cm
(Tower)
@@tranju1978 Yes, you can. Make sure to reduce the blade lengths accordingly. Else, it will hit the ground.
@@diyasfunplay how long should the turbin blade be
@@mariaelsayed5502 The blade length i had used is around 35cm. Plan accordingly.
what are the measurements??
Can I make it without any motor?🤔🤨
Is there an alternative for the rotation knob
Mein kis tarah se aapka dhanyvad Karu
Thank you too...
Can u tell me where u got the DC motor pls?
In Amazon
Thanks a lot,sir
From where you buy cardbord
In local store and sometimes in Amazon.
From where we can get the led lights ??
In electrical shops or online
Can you tell how to make dynamo
Plsss tell me how can i run both the windmill and the bulb plss reply me i have to show tomorrow 🙏🙏🙏
If you want to run the wind turbine without an external wind source, you'll have to use a battery to run both the turbine and the light,
What's the use of led bulb
Sir you have used how much rpm DC motor?
Somewhere between 10 to 90 rpm. Better is the output
Hope it helps ♥️♥️
What cap value did you use for the LED?
99
Sir can windmill blades and stand be available redeemed ?
Sorry, I do not have them now.
It's ok
Can I get all the materials listed out
Items needed for this project:
Cardboard,
Thermocol (only if you want a sturdy base)
hot glue gun
wires,
led bulbs,
switch,
dynamo, generator or dc motor (as you need)
scissors.
😀😀😀😀😃😃😃😃😄😆😆😅😂
😜😜😝😝😗☺☺😛😛😛😛☺😗😗☺😚
😗😝😜😔😌😬😍😐😑😶😏😒😬😬😌😔😜
Fun play time ki bacchi tere Jo video hai na sare link mein dal deti hai tu khud dikhaya karna sab kuchh itna information deti baithe ho usse achcha to vah acche to vah Riaz fan play time
Sir my LED is not working
why?
@@diyasfunplay i did same as you shown in the video. But after switch on the table fan and took the project to front of table fan,Only the motor is running and the light is not working.
Check and make sure that all the connections are correct. Check your generator/dynamo specifications. It should be a "low rpm generator". Normal generators will need more than 1500 rpm to generate electricity. But low rpm generators can generate electricity at a very low rpm. The turbine in my model rotates at around 80- 100 rpm. Only low rpm generators can generate electricity at this rpm. If all connections are correct, then the problem could be with the motor (not being able to generate enough electricity). Also make sure to use a low watt led.
Such as well
Super
How to make this house
ruclips.net/video/GtGQB3DvDcg/видео.html