Yamaha FZ16 Carburetor Disassembly || How to remove carburetor

Поделиться
HTML-код
  • Опубликовано: 26 авг 2024
  • How to remove Yamaha FZ16 Carburetor
    How to clean carburetor
    FZ carburetor cleaning
    #yamaha #fz16 #fz #carburetor #disassembly #remove #repair #cleaning
    Song credits:
    Song: Markvard - Dawn (Vlog No Copyright Music)
    Music provided by Vlog No Copyright Music.
    Video Link: • Markvard - Dawn (Vlog ...

Комментарии • 48

  • @Naveenmahourkoli
    @Naveenmahourkoli 2 года назад +1

    Bahi floating chamber ki ander ki pin toot gai hai. Kya pin repair ho jayegi

  • @mithultl
    @mithultl 4 года назад +3

    Bro, Whats the differents between double/single accelerator cable carburetors?

    • @AutoTribe
      @AutoTribe  4 года назад +4

      Dual cable or Push / Pull Cables. They are for like safety feature. If the return spring fails on the throttle body or the pull cable fails, with the push cable we can close the throttle.

    • @1234fazermann
      @1234fazermann 11 месяцев назад

      ​@@AutoTribebro my bike 2010 model Fazer, came with a single wire carb & is due for replacement as the slider & cylinder has worn out.
      Can I install dual wire(it is much much cheaper than the single wire)? Or will I have to change other components as well?

  • @AkbarKhan-wf7pl
    @AkbarKhan-wf7pl 3 года назад +2

    Bro can i fix Yamaha fazers carbetor Into Yamaha fz-s 2016 model plz suggest me

    • @AutoTribe
      @AutoTribe  3 года назад

      Absolutely. You can. Both bikes are same except that front faring.

  • @abdullahilkafi5380
    @abdullahilkafi5380 Год назад +1

    could you please make carburetor tuning video with this carb?

    • @AutoTribe
      @AutoTribe  Год назад

      Taken into account. Will Try.

  • @siddheshshanbhag
    @siddheshshanbhag 2 года назад

    Man, my fz's fuel drain screw is jammed. Even sprayed wd40 but it isn't coming out. What to do? Also, do we get another fuel drain screw in the market?

    • @AutoTribe
      @AutoTribe  2 года назад

      Workshop guys can get it removed. They will get it into lathe if they can't. And yes it can be available at local.

  • @howellpaulbernal5267
    @howellpaulbernal5267 4 месяца назад

    do you know what part number of carburator for the first gen of fz?

    • @AutoTribe
      @AutoTribe  19 дней назад

      i am sorry. i will enquire and will comment for all.

  • @amalaj4171
    @amalaj4171 4 года назад +1

    Bro ente 2009 model fz aanu.njan missing karanam oru workshopil koduthu,mechanic vacuum piston maari,iniyum missing vannal carburetor puthiyathu vaanganam ennu paranjhu, enikku slow il pokanae pattunnilla bro,speed il poyal valya kuzhappam illa,slow il poyal bike petrol illathae off aakunnapolae off aakua,njan enthu cheyyanam bro....

    • @AutoTribe
      @AutoTribe  4 года назад

      Did you change vacuum piston along with diaphragm? Diaphragm il oru small hole undengil ee preshnam varam. Carburetor inte jet clean cheyuka. Piston and diaphragm othu maaruka. enittum missing undengil carburetor maaruka. Because, Main Carb body il wear undegil piston moment nere avilla.

    • @muchachosmenace587
      @muchachosmenace587 3 года назад

      I am also having this problem. Mine is fz16. And i had a worn out choke plunger (starter set) . my bike has missing problem. When i start my bike and revv it there is no problem, but after riding for 1-2 kms bike starts to jerk. When i release and give throttle it feels like there is something not getting into the combustion chamber air or fuel , icant figure it out this problem is only while riding for me yesterday i ignored it and ride for maybe 4 kms then this missing became worse, then all i did was to hurry back home ,i couldnt slow down .while slowing down i had to keep my clutch pulled in and do hard revvs to keep the bike alive. So today i changed my choke cable with the plunger (starter set). When i started my bike with choke completely pulled in it started well and the rpm was the ideal one for fzs that is somewhere between 1500-600 rpm inspite of getting very high. But soon as i release the choke bike shuts down . can you help me with this?

  • @j4techmediajishnusreedharst
    @j4techmediajishnusreedharst 4 года назад +2

    Nice video

  • @easystepsmonkey707
    @easystepsmonkey707 4 года назад +1

    Powli😍😍😍

  • @pradhang3554
    @pradhang3554 3 года назад +1

    Fz carburetor in sz fittings ?

  • @vinlingwal
    @vinlingwal 3 года назад +1

    Y Didn't u disassemble the butterfly?

    • @AutoTribe
      @AutoTribe  3 года назад +1

      The carburettor were already damaged by someone.

  • @abhilashp2156
    @abhilashp2156 3 года назад +1

    Fz16 nu use avunna vere carburettor etha nallath

  • @dittoantony1326
    @dittoantony1326 Год назад +1

    Kindly explain and remove rather than covering with hands and fast forward. Only you will understand

  • @yakshagana41
    @yakshagana41 3 года назад +1

    Can we install pulsar 150 carburettor in fz16 ?? plz reply me
    Bcz fz carb costs more

    • @AutoTribe
      @AutoTribe  3 года назад

      Yes. People do that.

    • @armechtech5732
      @armechtech5732 3 года назад +1

      Go for stock carbuarator or pulsar 180 carbuarator

    • @iamshashankcm48
      @iamshashankcm48 9 месяцев назад

      ​@@armechtech5732why pulsar180? Why not pulsar150's carburettor?

  • @ripnip1970
    @ripnip1970 3 года назад +1

    Hi boss, I just have a question. I ride fz16 and it’s my first bike and I’m wondering why my bike always sputter when moving off/low revs and around 5-6rpm also sputter. Would appreciate if I could know why is it so.

    • @AutoTribe
      @AutoTribe  3 года назад

      Carburettor or fuel injector?

    • @ripnip1970
      @ripnip1970 3 года назад

      Auto Tribe carburettor bro

    • @AutoTribe
      @AutoTribe  3 года назад

      It would be the issue of inner piston of the carburettor. You can change it alone.
      Ps: buy from Yamaha authorised center for genuine quality parts.

    • @ripnip1970
      @ripnip1970 3 года назад +1

      Auto Tribe thank you for the help, truly appreciate it!

    • @AutoTribe
      @AutoTribe  3 года назад

      You are welcome

  • @user-kx3pe1yq3s
    @user-kx3pe1yq3s 3 года назад +1

    Where can i find carburetor repair kit?
    Can you send it to Ukraine?

    • @AutoTribe
      @AutoTribe  3 года назад

      Sorry. Search at your local online dealers.

  • @sahilchaudhary7482
    @sahilchaudhary7482 8 месяцев назад

    Bro what is jet size of fz carb

  • @Ytexplain1
    @Ytexplain1 3 года назад +1

    How much price ????

  • @jg-rn8nr
    @jg-rn8nr 3 года назад +1

    Any one here know if a scooter carburetor can work on the fz 16 like how they're similar

  • @lebronjames631
    @lebronjames631 3 года назад

    Bro paanu pag trotle ko e namamatay rouser 125