Full delete with HSP Y bridge, intake, turbo mouthpiece, hot and cold side intercooler pipes. Sinister up pipes magnaflow downpipe and air dog 2-4G lift pump. Will do an update video of the delete and current mods in near future.
Yes installed EFI live tuning at the time I did all this work. Unfortunately that has become much more difficult 2 find thanx 2 our friends at the EPA cracking down...
What did you do with the o2 sensors that were connected to the oem exhaust. Do you zip tie them out of the way? And how has the straight pipe from eBay holding up? Is it the same quality as the expensive ones? Thanks👍🏼 sorry for all of the questions
With that kit did they give u a extra piece of pipe for the options of running straight pipe or is it strictly just a muffler setup? Or do u have to buy that piece of pipe separate.
The kit is designed 2 fit short bed and long bed trucks. I have a 6'5 bed so it was just an extra piece. Just so happens its same length as the muffler so that's exactly what I did is swap the 2 and now I'm running straight pipe🤣
No cutting but the ends are flared 2 fit into one another since the 2 ends of the pipe were designed 2 fit inside the muffler I purchased a small double flared adapter 2 link the 2
@@Turnersspeedshop got any videos? Talking to guys half of them say no drone at all and then some say it's terrible 😂. Got a 5 inch with no muffler ordered, and I have no idea what to think at this point.
I'll see if I can do a few clips..hard 2 get audio 2 grab the drone effect...I like the tone, I enjoy it loud and driving around town no real drone or issue but pulling a load at 60-70 my ears are a bit numb after 6 hours 🤣
@@Turnersspeedshop yea that would be awesome. But yea frig I don't know much weight, but usually towing something and I don't wanna go deaf, but I really want that 5 inch tone.
Probably a lot of mixed responses 2 that question and a lot of opinions. I personally feel the flo pro system is superior in design and ease of installation. Performance wise u probably gain nothing with 1 over the other but especially if installing yourself u will love the flo-pro
Lol glad u got a laugh..if I remember correctly I unplugged them from where they fasten 2 the harness running along the truck. Just a plastic plug/clip No need 4 them in the system I used
Check out my other videos for exhaust tip install & review. I did not purchase kit with tip, went a less expensive route. However flo-pro has numerous system options
Hey sorry, came across your video again 😂😂 question... when you take out your old exhaust and put the new one in... do you have to plug the temp sensors into the new one? If not, do you just get a tuner that will block out the sensors?
Turners Speed Shop oh sweet! I thought it would be hard doing it on your own if I had to re use the sensors, but if I don’t need them then it should be easy plug n play
I did a removal video of the factory exhaust as well. Just disconnect and remove all that garbage, installed new system in about half hour. Tuned the truck and good 2 go. Took longer 2 remove the factory garbage than install the new system
Just ordered my 5inch flopro kit today
Awsome!..getting. ready 2 put 1 on my buddies lmm as well
Great video, definitely will help me. I’m doing it on my own so this helps
Awsome! I hope it's of great help 2 ya
I have the stainless steel flow pro muffler and it rusted on all the seams with like in four days of installing
Fuck yeah man! Looks sick! I’m ordering the Flo~Pro 4" Stainless Delete Exhaust System
Sweet... thanx man!
Love that sound!
Sounds good!
Is your truck completely stock except for 5 inch and EFI Live?
Full delete with HSP Y bridge, intake, turbo mouthpiece, hot and cold side intercooler pipes. Sinister up pipes magnaflow downpipe and air dog 2-4G lift pump. Will do an update video of the delete and current mods in near future.
What about the check engine light for the DPF? What do you do tuner?
Yes installed EFI live tuning at the time I did all this work. Unfortunately that has become much more difficult 2 find thanx 2 our friends at the EPA cracking down...
@@Turnersspeedshop thank you
Absolutely
One Time at Band Clamp.....
What all have u done to the truck?
What did you do with the o2 sensors that were connected to the oem exhaust. Do you zip tie them out of the way? And how has the straight pipe from eBay holding up? Is it the same quality as the expensive ones? Thanks👍🏼 sorry for all of the questions
I completely removed them..check out factory exhaust removal video.
@@Turnersspeedshop okay thanks man👍🏼
What did u do with the sensor on the stock exhaust and the two hoses ?
Check out my other video of the stock LMM exhaust removal..everything was disconnected and removed truck was tuned at the same time
Sounds great. What did you use to make the truck run without the dpf and cat? I have an 09 all stock and might need a new dpf so it may be time
Thanx bro. Truck is tuned with EFI live tunes by PPEI, eliminates cat, egr, dpf etc. In the ECU. Plus more power
To bad we can't get Flo pro anymore. In the USA. .. 😔😔😔
Check out ebay...even free shipping! 😁
With that kit did they give u a extra piece of pipe for the options of running straight pipe or is it strictly just a muffler setup? Or do u have to buy that piece of pipe separate.
The kit is designed 2 fit short bed and long bed trucks. I have a 6'5 bed so it was just an extra piece. Just so happens its same length as the muffler so that's exactly what I did is swap the 2 and now I'm running straight pipe🤣
So if u have a long bed it should work right?
Correct the kit will fit a long bed
Did u have to cut the extra pipe to run it as straight pipe.
No cutting but the ends are flared 2 fit into one another since the 2 ends of the pipe were designed 2 fit inside the muffler I purchased a small double flared adapter 2 link the 2
What’s the drone like when you’re towing?
I yanked the muffler off so it's a complete strait pipe now..drone is terrible now 🤣🤦♂️
@@Turnersspeedshop got any videos? Talking to guys half of them say no drone at all and then some say it's terrible 😂. Got a 5 inch with no muffler ordered, and I have no idea what to think at this point.
I'll see if I can do a few clips..hard 2 get audio 2 grab the drone effect...I like the tone, I enjoy it loud and driving around town no real drone or issue but pulling a load at 60-70 my ears are a bit numb after 6 hours 🤣
@@Turnersspeedshop yea that would be awesome. But yea frig I don't know much weight, but usually towing something and I don't wanna go deaf, but I really want that 5 inch tone.
Ya I do love it..sounds so good that's why I just deal with it when I tow lol
Why the stock spare tire?
When you unhook all the sensors (delete), how do you keep them from freaking out all the time (Alarms, chimes, lights, etc.)?
Truck was tuned with EFI live at the same time
@@Turnersspeedshop thanks
Is it tuned?
Yes EFI Live tuned
What is the best flo-pro or MBRP?
Probably a lot of mixed responses 2 that question and a lot of opinions. I personally feel the flo pro system is superior in design and ease of installation. Performance wise u probably gain nothing with 1 over the other but especially if installing yourself u will love the flo-pro
@@Turnersspeedshop thank you very much 👍
Diamond eye
also what did you do with the o2 sensors? im installing this on my truck tomorrow
Lol glad u got a laugh..if I remember correctly I unplugged them from where they fasten 2 the harness running along the truck. Just a plastic plug/clip No need 4 them in the system I used
Turners Speed Shop okay cool thanks! i have the same one in my garage ready to assemble in the morning 👍🏽
Awsome... I'm sure u will be happy..best of luck 2 u
What is the part number please
your commentary on the instructions has me dying lol
Is this stainless steel?
Yes
Is there an exhaust tip?
Check out my other videos for exhaust tip install & review. I did not purchase kit with tip, went a less expensive route. However flo-pro has numerous system options
Hey sorry, came across your video again 😂😂 question... when you take out your old exhaust and put the new one in... do you have to plug the temp sensors into the new one? If not, do you just get a tuner that will block out the sensors?
No sensors re used in the new exhaust. Tuned with EFI live wich deletes everything in the ECU so no longer needed
Turners Speed Shop oh sweet! I thought it would be hard doing it on your own if I had to re use the sensors, but if I don’t need them then it should be easy plug n play
I did a removal video of the factory exhaust as well. Just disconnect and remove all that garbage, installed new system in about half hour. Tuned the truck and good 2 go. Took longer 2 remove the factory garbage than install the new system
Part number