That's a nice mini sluice. I just saw that model at the GPAA Gold & Treasure show in Fresno Ca. Royal Manufacturing was there selling there equipment. That particular High Banker was being sold with an 12V Tsumani 800 GPH PUMP... A guy that bought the same model said he felt the 800GPH wasnt enough water for that unit, so he replaces it with an 1250 GPH pump to move the rocks better... ⛏🇺🇸
Good job on the mods. My suggestion would be: don't put any punch plate or mesh on top of your 'crash pad' (the miners moss in the bottom). But do use minors moss and non-angled (flat) expanded mesh up top in your hopper (this setup is often called a clay-breaker). You will find that you will collect most of your gold in the top clay breaker, and some more in the crash pad. Be careful not to run the hopper angle too steep. Good luck and happy hunting 🙂
Granted it's alot of fun but some times is it really worth working all day and getten 30$ in gold in some ways yes other no cause it fun and gives u something to do
Nice Video! Why running a gas pump with this small highbanker? Would not be a battery and 12v pump do the job too and would be less weight compared to the gas pump? Regards
With the gas pump, more pressure and water volume break apart the material and move it through the box faster. You can move alot more volume. Plus you can run all day on a half gallon of gas whereas a car battery would only last a couple hours....both are heavy and gas is noisy obviously Noise improvements are coming up in a future post.
That's a nice mini sluice. I just saw that model at the GPAA Gold & Treasure show in Fresno Ca. Royal Manufacturing was there selling there equipment. That particular High Banker was being sold with an 12V Tsumani 800 GPH PUMP... A guy that bought the same model said he felt the 800GPH wasnt enough water for that unit, so he replaces it with an 1250 GPH pump to move the rocks better... ⛏🇺🇸
Before upgrading to a 1" gas pump, I did the same and upgraded the 12V pump to 1250 GPH I believe your friend is correct!
Very nice bud, a half gram in 4 hrs is awesome. Great job 😁🤙
Good job on the mods. My suggestion would be: don't put any punch plate or mesh on top of your 'crash pad' (the miners moss in the bottom). But do use minors moss and non-angled (flat) expanded mesh up top in your hopper (this setup is often called a clay-breaker). You will find that you will collect most of your gold in the top clay breaker, and some more in the crash pad. Be careful not to run the hopper angle too steep.
Good luck and happy hunting 🙂
Thank you for the info I'm going to research a clay breaker in more detail
@@GoldProspectingGear - You can see my clay breaker assembly here in one of my videos. ruclips.net/video/Yxx2qi0Opjc/видео.html&t=
Very nice! I also have a mini highbanker that needs some help/modifications. Thanks for the video.
Thanks Bill!
Nice work bud. Looks good
Thank you Jeremy! :)
It does the job. Excellent product.
Agreed!!
Nice
Try using gums instead of miners moss...it gets clogged up much quicker than gums...
Thanks for the tip I will check it out. Do you by chance have a link?
Nice 👌
Granted it's alot of fun but some times is it really worth working all day and getten 30$ in gold in some ways yes other no cause it fun and gives u something to do
Fun is what it's all about 😀
Muito bom bonito de mais 💯👏👏🤝👍
Thanks!
Nice Video! Why running a gas pump with this small highbanker? Would not be a battery and 12v pump do the job too and would be less weight compared to the gas pump? Regards
With the gas pump, more pressure and water volume break apart the material and move it through the box faster. You can move alot more volume. Plus you can run all day on a half gallon of gas whereas a car battery would only last a couple hours....both are heavy and gas is noisy obviously Noise improvements are coming up in a future post.
Berapa harga
Наглядный пример как не надо делать мини драгу .