How Do You Configure An LED Wall? feat. Novastar Processors

Configuring LED Walls seems like a difficult task, but with the right processors and software, it's easy! We'll show you how to configure your LED Wall with Novastar processers in this video.
00:00 Introduction
00:17 The connections
01:10 Launching the NovaLCT software and configuring the panels
02:42 The Receiving Card Page
03:55 The Screen Connection Page
04:40 After sending the information to your hardware
05:50 Closing
If you are interested in any of the Gear used and Reviewed in our videos take a look at our website: www.learnstagelightinggear.com
Video Specs:
Video Shot On Sony ZV-E10: geni.us/lkqnAg
Airwave Wireless Microphone: www.airwavetechnologies.com/c...
Voiceover Mic: Heil PR-40: geni.us/fcN0hAO
Lighting Visualization By Capture: www.learnstagelighting.com/wa...
Video Card: GTX1050 TI: geni.us/WBTe
Backdrop/Ambient lighting:
Eliminator Par Mini RGBW: geni.us/QKXI
Gamma TX5 for Pattern on Backdrop: www.learnstagelightinggear.co...
Disclaimer: This video and description contain affiliate links.
Comments Policy: Be nice, and treat others well. This channel has grown a lot, and if I want to keep up with helping folks in-depth, I can't reply to the comments personally.
Creating these videos takes a TON of time and effort, and I am not always available to answer questions here personally.
Here is how we can get your questions answered:
Join us in Learn Stage Lighting Labs and get premium support + over 28 hours of step-by-step video training: learnstagelighting.com/labs
Many of the questions that come in here can also be answered by simple searching on Learn Stage Lighting.com via the Search Bar in the top right corner: www.learnstagelighting.com/al...
Thanks for understanding!,
-David

[@TheRosietheriveter]

Very helpful video!

[@katheebee0818]

This is absolutely helpful! Can you also please create a video for configuring an 80 panel led wall?

[@nikiemapaul2480]

Thank you sir that was helpful

[@sandipmandal4380]

Thank you🌹

[@nikiemapaul2480]

thank you

[@ToluOlayinka]

Amazing content.
Really helpful.
I have an LED wall and ill like to place a Square LED (500x500) 8 of them below and place a Rectangular LED (500x1000) above
Is this possible to configure such?

[@onatestuesta261]

what is the max panels per port on sending card?

[@sandipmandal4380]

4.8 Nvs+jona 4.8 LED wall colour machining video please🙏

[@IpilShikdaripil]

If it’s a perimeter , what will be connection pattern?

[@Rokelz]

How do you calculate the seize of a Led screen to map out

[@mrsorry9519]

Hi brother if I want to use W 128 and H 3074 1 port can or not?

[@georgettebest9408]

What’s the best computer to run this system with

[@mmpremm]

A big time rookie here, I have 8 panels 3.91 500 widex1000 hight. 4 columns x 2 rows, my display is showing the top of the screen at the bottom, on both rows. Any idea what I need to change?

[@onatestuesta261]

Can you give an example how to calibrate 70panels/cabinet setup is 14x5...

[@ajsrocks100]

Also me thanks

[@ajsrocks100]

Same size with 2.6 pixel pitch

[@darronjefferson]

so what if a panel is not showing anything but your connections are solid? how do you trouble shoot that?

[@LearnstageLightingGear]

I would try a different receiver card on the panel, it sounds like that is probably the culprit here

[@fixitchancy923]

Which processor is this?

[@user-bp5hx8sk5f]

I haven't been able to get my led video wall to go to full blackout. When I plug it into my laptop, it does. But when I connect it to my Mac mini, its stops. Mac mini setup: out of Mac mini into black magic duo link card, out of duo link card to HDMI In Converter, out to Ethernet, to Ethernet Input on HDMI converter, HDMI out into controller.

[@LearnstageLightingGear]

That's typically a video driver issue, try updating your driver, check all your deep display settings, or adjust the gamma.

[@mugarracris3680]

Was that a 4*4 or 4*3?

[@sandipmandal4380]

Processor vx4s 5s and 10000

[@stephentunes9590]

I have problem connecting with the receiver

[@ajsrocks100]

Diagnosis the cards find one that's working and copy that one

[@CalebAngelino]

David, I love your content, but your audio is getting significantly worse lately, especially on phones and laptop speakers. It sounds like you're over-processing with noise removal to the point that it ends up being muddy. It might help if you use a high-pass filter up to around 120Hz and/or a different NR plugin. Waves NS1 is pretty good and cheap. Thanks, and keep up the good work!

[@LearnstageLightingGear]

Hey Caleb, thanks for your input, we are going to look into that and make it better on the next one.

[@CalebAngelino]

@@LearnstageLightingGear Thanks!

[@gimcalim9259]

Maybe you can help me

[@NickDelDuca]

Why do these video walls always look so bad on camera?

[@LearnstageLightingGear]

It's not always easy, here's our tips: ruclips.net/video/wvhAW27ALR0/видео.html

[@NickDelDuca]

@@LearnstageLightingGear excellent thanks!

[@cristofross8032]

‎‏༺꧁🤎꧂༻🦅.

[@MrGabaGandu]

Sir i want more learning