Yo kit is puka great vid as per usual man, but for us ntters who like mental speeds, are you planning on updating your site to include sabvotons and qs205s in the future as like you had before listed before the revamp of the site? Hope so man
Love this, building my own at the moment however I have been waiting 12 days now for a 48V battery from kirbebike for UK delivery... is that normal? My motor etc. arrived within 7 days
hi i just got a new hard tail mountain bike and was wondering if the Kirbebike's 1500w and 2000W MTX Rim Ebike Kit will fit my bike which is a Vitus Nucleus 27 VRS Mountain Bike in a meduim 17inch- or 43.2 cm as i saw dudestuff fit kit on a vitus but not sure what size his was cheers
thats the same motor i got from your site last year. i have put a kt controller with a 52v battery and 60a bms. i regularly run 3kw through the motor and it loves it. it does well over 35mph which on a push bike is squeaky bum tackle.
@@tarstarkusz yes its a kt sinewave controller and it does go faster than 35mph but im too chicken to go faster. mountain bikes are just not designed to go that fast.
@@foreverhungry84 Fair enough. If it is a high quality mountain bike, outside of the relatively narrow tires, I wouldn't worry about it too much. OTOH, if it is entry level or, worse, a big boz mountain bike, you definitely should be worried about going too fast. Besides, they are plenty fun even at 20-30mph!
If that bike is aluminium, it is very unsafe to bend out the dropouts. The stays can crack. Aluminium really doesn't like to be bent, especially not tubes. It's absolutely fine to do that with a steel frame and completely forbidden with an aluminium frame. Doing this with an electric motor pulling 1500 watts is going to maximize the stress on those stays.
I swear thats a good Questionen, im on the Internet site and the 2000w weel has this 3 cabels and the big White one. But the new Controller has Other Connection. Bro ???? Help
Andy, I am loving the kit, but unfortunately I was trying to adjust the settings and accidently set a password that I didn't write down and now I am locked out of my bike. What are possible solutions?
Try playing it back at 1.25X speed. If you can ride that fast without a motor, you'd still get dropped by Wout Van Aert! Just saying how effing fast these pros go! :)
Sent you an email,.it wouldnt let me post it here, kept saying " remember to stick to our community guidelines" and deleted my post. It wasn't nasty, it was an apology.
I have a 52v BBSHD 1.6kw and 24ah with Panasonic GA on a light little 26" urban bike, I restricted the controller to 15 amps from the stock 30 for fear of my Sturmey RK8 hub exploding, just now it's running something like 650 watts nominal max and my bike still flies up 20% gradients at 25mph so I don't even feel the need for the other 15 amps. On the flats/commuting and generally I ride at 16-20mph as that's still faster than your average cyclist on a non ebike and I keep the 40mph blasts for the disused railway paths and offroad stuff in the woods and I never have issues with Police or the public hating me. Show some respect.
I swear I can get this kit up to 72 kph on a flat road full charge man i love this kit just can’t figure out how to change it to mph 🤯 doesn’t bother me tbh eyes are usually on the road not the speedo haha 😂
I read somewhere that if you have 26" wheels and you change the wheel size to 20" on your controller, then the speed displayed will be MPH (even though it says KM/H).
You turn on the system by pressing the power button and after the system is turned on you hold down + and - buttons to enter the advanced setting menu, I can't remember from the top of my head which setting it is but it's usually one of the first ones like P02 or P01
Was it not much better to buy a full suspension mountain bike with high end parts For half the price To me destroying a brand new ebike to build this. Is a big no-no in my book I would rather give it away for free. Which I have done before Then destroy it for nothing.
I'ts not a waste, it was shite before and I own the company that makes these parts so its not really any cost to me. It's meant to be a fun educational video, lighten up.
46mph with no weight on bike is not top speed. bbhsd 1000w with no weight on my bike with 48v17ah battery goes 70mph in reality my fat ass goes max 38mph
I didn't say it was the top speed. Realistically it all depends on weight you are right there. I said in the video I'm guessing this will male 40mph ish...
Questionen, im on the Internet site and the 2000w weel has this 3 cabels and the big White one. But the new Controller has Other cabel Connection. Bro ???? Help pls. When i buy the 2000w kit i cant use them because of the new Controller or the old weel write? 😢😢😢
Авто/Мото
“ this 250 watt 36 volt bike is rubbish” lol . Love the honesty about weak ass e bikes😅
Thats accurate for all uk road legal ebikes. Whoever thought setting the limit at 15mph clearly has never actually cycled on our streets.
Hi Andy, it's good to see you doing what you are known for, which is building fast electric bikes 💯%👏🏽
I love a over build. I did this with my older e-bikes! Fun builds. Fast ride
Nice build from stock "off road " awsome 👍
Nice and simple, I like it
Yo kit is puka great vid as per usual man, but for us ntters who like mental speeds, are you planning on updating your site to include sabvotons and qs205s in the future as like you had before listed before the revamp of the site? Hope so man
Good video Andy, I like my e-bike the way it came, but yours mods must interest the viewers who like "SPEED"
I've put this kit on giant bike it very good need a better throttle the clamp over one ..i use level 3 30mph would recommend
I like the way you counter your ebike carbon footprint with a 5.0 - yess! 😂
5.0 mustang. Let's go Andy 👍🤜
Guess can sort of jb weld a, noggin under the battery so it sits a bit inside the holder for more support
Love this, building my own at the moment however I have been waiting 12 days now for a 48V battery from kirbebike for UK delivery... is that normal? My motor etc. arrived within 7 days
nice video, i actually ducked when you were going through the low trees 🙃
Nice tunes 👀👀😳💯🌄
hi i just got a new hard tail mountain bike and was wondering if the Kirbebike's 1500w and 2000W MTX Rim Ebike Kit will fit my bike which is a Vitus Nucleus 27 VRS Mountain Bike in a meduim 17inch- or 43.2 cm as i saw dudestuff fit kit on a vitus but not sure what size his was cheers
I have one of your big kits but you really have to take care of those big heavy hubs on pot holes etc.
You got that right. I bent my first rim on a pothole.
Have a 2021 zero 10x 2000w e scooter hydraulic brakes and upgraded front and back suspension, really want to do a swap for an e bike peddle assist
thats the same motor i got from your site last year. i have put a kt controller with a 52v battery and 60a bms. i regularly run 3kw through the motor and it loves it. it does well over 35mph which on a push bike is squeaky bum tackle.
I think it should be faster than 35mph with 3kw. Do you have a high quality sine-wave controller?
@@tarstarkusz yes its a kt sinewave controller and it does go faster than 35mph but im too chicken to go faster. mountain bikes are just not designed to go that fast.
@@foreverhungry84 Fair enough. If it is a high quality mountain bike, outside of the relatively narrow tires, I wouldn't worry about it too much. OTOH, if it is entry level or, worse, a big boz mountain bike, you definitely should be worried about going too fast.
Besides, they are plenty fun even at 20-30mph!
Hi Andy is this one of your new kit? Can you show us the inside of the hub motor? Will it recharge the battery downhill? Thanks
What Tyre pump you using mate ?
Hello Andy,
what kind of hill can one of these tackle gradient wise please?
Thanks 😊
Do these controllers come as standard now on the 1500-2000w set
why did they have to add shims to the cassette if it was wider than the drop outs after adding the shims?
I want to build an ebike oneday 👽👍
If that bike is aluminium, it is very unsafe to bend out the dropouts. The stays can crack. Aluminium really doesn't like to be bent, especially not tubes.
It's absolutely fine to do that with a steel frame and completely forbidden with an aluminium frame. Doing this with an electric motor pulling 1500 watts is going to maximize the stress on those stays.
Its true but really it was more prizeing apart than bending.
Is the new Sine wave controller compatible with the previous 2000w hub motor and display???
I swear thats a good Questionen, im on the Internet site and the 2000w weel has this 3 cabels and the big White one. But the new Controller has Other Connection. Bro ???? Help
Yeah it's hard to find a universal way of fitting everything sucks you gotta use shims so much I had to for my Crystalyte kit.
Andy, I am loving the kit, but unfortunately I was trying to adjust the settings and accidently set a password that I didn't write down and now I am locked out of my bike. What are possible solutions?
May I ask, is it possible to attach two batteries to an ebike for double the mileage?
Hi Andy
I have a display like this one. Do you know how to reset the trip odometer without reseting the main odometer
SHould do it automatically when you switch the battery off
⚡🤙🏼⚡
Any fast bikes going for around £500 plz
💙👊😎
Hi Andy how much it costs all together for conversation with your motor n parts
£600 but dont go though andy he scams i order a kit on the 7th i just had to do a charged back as nothing been shipped
@@gizmo_puglife9280 wow what happened Bro
turn the video off for abit its note uploaded at max res
Try playing it back at 1.25X speed.
If you can ride that fast without a motor, you'd still get dropped by Wout Van Aert!
Just saying how effing fast these pros go! :)
Yeah downhill tho...
1:16 5.0 is MASSIVE font 😂
Nothing says quality like heavy duty cable ties keeping your battery on
🙌🏻🙌🏻🙌🏻
⚠️⚠️If anyone would like to buy this awesome ebike please contact me at andy@cloudsto.com ⚠️⚠️
Sent you an email,.it wouldnt let me post it here, kept saying " remember to stick to our community guidelines" and deleted my post.
It wasn't nasty, it was an apology.
I have a 52v BBSHD 1.6kw and 24ah with Panasonic GA on a light little 26" urban bike, I restricted the controller to 15 amps from the stock 30 for fear of my Sturmey RK8 hub exploding, just now it's running something like 650 watts nominal max and my bike still flies up 20% gradients at 25mph so I don't even feel the need for the other 15 amps. On the flats/commuting and generally I ride at 16-20mph as that's still faster than your average cyclist on a non ebike and I keep the 40mph blasts for the disused railway paths and offroad stuff in the woods and I never have issues with Police or the public hating me. Show some respect.
650w is the max power of my bbs01b 250w 48v. How can you go 25mph on a 20% gradient? It would be impossible with my mid drive motor.
@@Marco-vn1db perhaps it's more like a 15% gradient it's very steep but yep gets up it speedily
I swear I can get this kit up to 72 kph on a flat road full charge man i love this kit just can’t figure out how to change it to mph 🤯 doesn’t bother me tbh eyes are usually on the road not the speedo haha 😂
Also 1700 kilometres covered on and off road similar to the video with zero issues 😎
I read somewhere that if you have 26" wheels and you change the wheel size to 20" on your controller, then the speed displayed will be MPH (even though it says KM/H).
You turn on the system by pressing the power button and after the system is turned on you hold down + and - buttons to enter the advanced setting menu, I can't remember from the top of my head which setting it is but it's usually one of the first ones like P02 or P01
No sound Andy 😢
Sound is working now
Was it not much better to buy a full suspension mountain bike with high end parts
For half the price
To me destroying a brand new ebike to build this.
Is a big no-no in my book
I would rather give it away for free.
Which I have done before
Then destroy it for nothing.
I'ts not a waste, it was shite before and I own the company that makes these parts so its not really any cost to me. It's meant to be a fun educational video, lighten up.
46mph with no weight on bike is not top speed. bbhsd 1000w with no weight on my bike with 48v17ah battery goes 70mph in reality my fat ass goes max 38mph
I didn't say it was the top speed. Realistically it all depends on weight you are right there. I said in the video I'm guessing this will male 40mph ish...
Questionen, im on the Internet site and the 2000w weel has this 3 cabels and the big White one. But the new Controller has Other cabel Connection. Bro ???? Help pls. When i buy the 2000w kit i cant use them because of the new Controller or the old weel write? 😢😢😢