I'm engineer, too but I haven't yet seen a guy who works clean, technical, even esthetically like an artist and love his/her job (except myself). Since he's old one enough, he can be a bridge between old fashion and new so he can make a modernization by the tools and knowledge he has. What can we say: Bravo Daniele! I hope everybody loves their jobs like you.
AWWWW-SOME! GREAT video! SUPER COOL re-creation ideas. VERY inspiring, encouraging & motivating. I can’t wait to see what goodies lay within the stuff I have
№-3. Материнскую плату жалко. Но очень красиво получилось! ;-) №-2. Баян ). Это как флешку в голову ) №-1. Тоже было уже на канале Но! Как обычно очень красиво и здорово!!!
i am a big big fan of your diy's Daniele .... i loved the floppy disk and memory card project in this beautiful video. keep up the good work... hats off .
Ciao Potresti fare un upgrade all'orologio, togliere la lancetta dei secondi e per ogni foto inserire un led che si accende ad ogni secondo. ......bei lavoretti.👍
Great job done. Perfect. But for last project regarding HDD you spent too much money(drive board for motor). I did same but I used HDD drive board it self. Only add 7805 stabilizer for 5 volt, and applying 12 volt motor start working without stopping. I am agree I can't control RPM, but is good for me
I amde the same thing as you at thet end of the video use HS disk as a needele for the clock also thanks for telling us where the gold was in the tone arm; I use my old hard disks as a gyroscope to stabilize my binoculars in fact I remove almost all the reading part like you but I put the disks back I put x7 or 8 and I put the wahser back on top; if you start the HD now it will have a very marked gyroscope effect I then put it under my binoculars and I now have stabilized binoculars for a few dollars if you have a HD scusi at 7200 rpm it's even better or even the very old ones 3 inches tall as for the magnets, I put them in a small 2x4 in. box and they serve as an empty pocket for my monnies I don't know how to put a video on utube to show my gyroscope but if you do, please tell me jacquessavard videotron ca
You must be very careful when cutting those motherboards. These types of electronic components have various materials that can be harmful to health if they remain floating in the air and can easily be inhaled. Research more about that.
I really don't think these "3 Amazing Ideas" type of videos serve you or others very well. If I can't tell what a video is about, I simply don't watch them. Also, I have far more time for a 5-minute video than a 15-minute video. I'd be much more inclined to watch them if they were one topic per video. The only reason I watched your video and a previous one is I really like the methods and ideas that you have. I also really like the clean and precise way that you build things. So, just a hint that I never would have watched this, if you weren't the author of them! I think you'll get a lot more views with short well identified topics. All the best! Keep Making!
This video is obviously ment to be a joke of some missguided sort, and ment to be funny. Well, it´s not! Please cut this silliness out, and make regular videos, please.
I'm engineer, too but I haven't yet seen a guy who works clean, technical, even esthetically like an artist and love his/her job (except myself).
Since he's old one enough, he can be a bridge between old fashion and new so he can make a modernization by the tools and knowledge he has.
What can we say: Bravo Daniele!
I hope everybody loves their jobs like you.
Your projects are ridiculously satisfying to watch. Yeah, I just totally envy your skills.
Lol, now I know the most complicated way to read SD cards ever!
Ya
It's an SD card only you can access the files of!
@@Mr.Engine993only for fair men, cuz if you want to read those files, you can just reap apart this floppy and put the SD in a regular card reader
AWWWW-SOME! GREAT video!
SUPER COOL re-creation ideas.
VERY inspiring, encouraging & motivating. I can’t wait to see what goodies lay within the stuff I have
I was dreaming about the floppy disk mod. Well done!
Хорошие идеи. Особенно понравилась вторая. Может быть и попробую так сделать.
the floppy disc is the best & i wish maybe someday that thing i available in aliexpress
Uno dei migliori progetti visti online da anni!!!!!!!
Complimenti.
Impressive quality and attention to detail. You must love doing this work.
№-3. Материнскую плату жалко. Но очень красиво получилось! ;-)
№-2. Баян ). Это как флешку в голову )
№-1. Тоже было уже на канале
Но! Как обычно очень красиво и здорово!!!
Привет Даниэль. Как обычно получаю большое удовольствие от просмотра твоих роликов. 👍 Так держать. 👏👏👏👏👏👏👏. Спасибо.
Nice sharing idol
Come complicarsi la vita ma rendere tutto ciò estremamente appagante 🤣 complimenti Daniele!
ขอบคุณมากครับกับสาระและไอเดียดีๆ
nice funky music🎼
quality crafts. Great work. The 238 gig 3.5disk is a nice touch.
Excellent projects
i am a big big fan of your diy's Daniele .... i loved the floppy disk and memory card project in this beautiful video. keep up the good work... hats off .
Damn that's an impressive clock,I want one! Nicely done.
Progetti molto buoni. Sono entusiasta. Il secondo in particolare è fantastico!
Out of new idee's
Bravo!
Огонь. Всех благ.
Amazing, awesome.
Your mom is a good dancer so you love music
Wow you found a way that no one can copy your inventions, you get the idea. That's it.
Cool projects!
Bravissimo!
Ciao
Potresti fare un upgrade all'orologio, togliere la lancetta dei secondi e per ogni foto inserire un led che si accende ad ogni secondo.
......bei lavoretti.👍
Mejor los tornillos del lado de abajo.. saludos!!
Flash in floppy👍
هل الكاميرا السونى القديمة التي تعمل بالفلوبي ديسك يمكن تهيئتها لتعمل بكارت المميري ؟
this guy is coming right out of future or some Blade Runner kinda movie.!!!!
very nice.
E sempre un piacere vedere i tuoi progetti
Perfecto
Hallo Daniel, tolle Arbeit nette Ideen !!! Kann man die Abdeckung von dem Mini Schleiftisch irgendwo kaufen?
9:46: ma hai un MacBook Pro con Windows sopra? 😳 Perché? 🤔 comunque hai un’inventiva invidiabile e capacità tecniche ancora più invidiabili! ❤️
This is very cool! Subscribed🔥
Great job done. Perfect. But for last project regarding HDD you spent too much money(drive board for motor). I did same but I used HDD drive board it self. Only add 7805 stabilizer for 5 volt, and applying 12 volt motor start working without stopping. I am agree I can't control RPM, but is good for me
That potentiometer would get hot under that load. PWM the voltage of the supply allows rpm changes and better heat dissipation (with a heatsink).
Floppy для желающих поностальгировать ))
I have the motherboard, so I need 50 more tools for build a watch?
Buon primo maggio !!!!
All that effort about motherboard, just to make a watch? 5 or 6 dollars worth watch, this is insane
Que dispositivo es el que se muestra en el minuto 10:21??
Pareciera un control de velocidad...
I amde the same thing as you at thet end of the video use HS disk as a needele for the clock
also
thanks for telling us where the gold was in the tone arm; I use my old hard disks as a gyroscope to stabilize my binoculars in fact I remove almost all the reading part like you but I put the disks back I put x7 or 8 and I put the wahser back on top; if you start the HD now it will have a very marked gyroscope effect I then put it under my binoculars and I now have stabilized binoculars for a few dollars if you have a HD scusi at 7200 rpm it's even better or even the very old ones 3 inches tall
as for the magnets, I put them in a small 2x4 in. box and they serve as an empty pocket for my monnies
I don't know how to put a video on utube to show my gyroscope but if you do, please tell me jacquessavard videotron ca
The thumbnail...
Adorei o segundo, muito bom...
You must be very careful when cutting those motherboards. These types of electronic components have various materials that can be harmful to health if they remain floating in the air and can easily be inhaled. Research more about that.
nice 😍😍
please tell components of second build
👍
Does your mind ever sleep? You do some great projects.
Nice
👏👏👏👌👌👌🙏💐🌷
🔝
there aren't no numbers in this clock
Ok
only the last one is good
first one is just useless
Impossible to assign one of those projects to this century students. They prefer to purchase something done.
I really don't think these "3 Amazing Ideas" type of videos serve you or others very well. If I can't tell what a video is about, I simply don't watch them. Also, I have far more time for a 5-minute video than a 15-minute video. I'd be much more inclined to watch them if they were one topic per video. The only reason I watched your video and a previous one is I really like the methods and ideas that you have. I also really like the clean and precise way that you build things. So, just a hint that I never would have watched this, if you weren't the author of them! I think you'll get a lot more views with short well identified topics. All the best! Keep Making!
To wszystko bylo juz
not a real floppy disk.
what is wrong with this guy, there is a clock on your computers operating system
This video is obviously ment to be a joke of some missguided sort, and ment to be funny. Well, it´s not! Please cut this silliness out, and make regular videos, please.
😭😭😭😭😭😭😭😭😭😭😭
Absolutely suck! only normal things, I thought he will make some advance IT product .
nice ideas :D