2 Ways to Test Your Air Compressor
HTML-код
- Опубликовано: 1 авг 2024
- Today THE Guru walks you through a couple ways to find out if you compressor is pumping to its full potential.
You may contact THE Guru through the link below.
thecompressorguru.com
DIY, Air compressor repairs, air compressor rebuild, air compressor overhaul, air compressor parts, air compressor service, how, to, Ingersoll rand, Quincy, quincey, reciprocating compressor, piston compressor, jenny compressor, emglo, saylor beall, Atlas Copco, air tool, tool, air treatment, air systems, air piping, orifice gauge, pump up test, compressor evaluation,
Great video. I recommend using a pipe cross in place of the tee and add a safety valve. Just in case the pressure runs away. Also don't forget to wear your ear plugs. It be loud.
Great suggestion. Self preservation is a priority! I usually only use an orifice gauge on portables or large screws in factories. the safety valve on the separator should pop but you know when to many things are wrong ... great idea.
Wow Bud! Amazing information. You’re the man! And thank-you again.
That Great Knowledge & advice (& DIY flowmeter/orifice gauge design 👍). I'll print & save for ready reference, Thamk You Guru! Say hi to camera wife & Bud for me. Praying for continued healing up after surgery. Blessings, Paul from S. Central Tx.
Thanks for sharing all your wisdom! I made a version of your muffler that works great.
Recently stumbled on your channel, lots of good info!
Could you make a video on who owns who? Is Quincy is owned by Atlas Copco? Kellogg American is owned by CompAir, who is then owned by Gardener Denver ?! Any others?
This might be a future video for electric guru... There is one MFR that makes a 10 horse single phase (Eaton / Polar Air). I have all the power... Something else i should be aware of?
Who uses whose pumps? Eaton uses Kellogg American, any other cross brand use?
Why is 185 CFM so popular for portables?
Anyways, I'd love to see more videos, maybe some to answer the questions above 😁
Thanks for the video! I work for a compressor company in MA and sometimes I share your channel with my new techs! Now I need to find a copy of that orfice chart so I can make a couple of test fixtures
www.engineersedge.com/fluid_flow/discharge-air-orifice.htm hope this helps.
I tested my compressor it a 80 gal. & it took 20 min., What could I do to help it, I have ben buying the cheap compressors.& I realy like your show
Hi Jerry. i need a little more info. is this a 5 hp compressor, 2 stage? Please reach me by using the contact tab on thecompressorguru.com . I do have an idea about what the problem is .
I do maintenance on compressors around my area. What would you say is healthy pump up time for 5hp, 2 stage, 80 gal @150 psi? I recently changed a tank for a body shop that had pinholes in the tank bottom and they had tried to repair with epoxy and ran it for a few years like that. They wrecked the pump valves from running 100% duty when the plug patch failed. Valves were colored blue from heat. I should send you a picture.
Cut me through thecompressorguru.com
Someday I would like to do a customer submitted video.
I would luv a picture of that tank.
Great information Bud, Thank you👍🏻