Bro, I just made that change to my gladiator but my LED headlights only turn on with the jeep off. When I turn on the jeep, I turn on my lights and they just flash and go off. Could you help me tell me what is happening?
Great video. And further video or information on wiring? Do you tap into the actual headlight plug for the white halo and the extra wire on the back of the headlight goes to the signal light for the amber halo? Just picked up a set for new gladiator and the instructions aren't that clear. Thanks for any help.
Hey thanks for the kind words and watching! Honestly i havent wired the halos up yet. Ive got a set of factory LED fender/marker lights to install and i am going to wire all of it up then. I will film it ans post. Let me look again at the wiring and ill get back with you on how it wire up. Just be careful using ez wire taps and not splicing sauldering and heat shrinking the connections. Theses run on a canbus system and wiring something in wrong can cause A LOT of problems quickly
You just had to plug the factory harness into the light to get the halo and headlight to work? I've seen other videos where they use a supplied wire harness for the halo and amber switchback(which I'm not interested in). I also have a '21 JT Willy's
If you want the halo to work as a day time running light you have to run the included harness. But if the headlights are on the halo is on just with the factory plug. Thanks for watching!
It’s plug and play DRL is automatically connected. The extra connection is if you want the turn signal function. Some jeeps might just need a flash to get the drl to work
Thanks and no they dont. Ive had them for over a year with zero issues! Im pretty sure who ever makes the OEM led lights made these because they are almost identical
How long have you had these installed on your jeep? I’ve had them on my gladiator for 6 months now great looking headlight but I’ve had problem with flicker of passenger unit below freezing temps.
Probably 6 months, i havent had any issue with them. The only thing i noticed is before i installed the tazer mini they would cut off but it was a programming issue in the BCM not with the lights. They have a year warranty definitly reach out to DV8 about it. Thanks for watching and the comment!
Still waiting on the video on how to connect the extra wires , I know one of the extra wires on the headlights is for the day time running lights but what about that white single wire
I havent forgotten about it. Im wrapping up a prjoect this week amd will work on the wiring the very next thing. Sorry for the delay but i appreciate you keeping up with the videos
It’s plug and play DRL is automatically connected. The extra connection is if you want the turn signal function. Some jeeps might just need a flask to get the drl to work
Sorry for the delayed response. Initially everything seemed ok. I started having my lights turning off randomly. I have since added a JL mini and solved the problem. I will post a video soon detailing the issues and the fix. Thannks for watching!!!
Me gustan esas luces las compraré saludos
Bro, I just made that change to my gladiator but my LED headlights only turn on with the jeep off. When I turn on the jeep, I turn on my lights and they just flash and go off. Could you help me tell me what is happening?
Great video. And further video or information on wiring?
Do you tap into the actual headlight plug for the white halo and the extra wire on the back of the headlight goes to the signal light for the amber halo?
Just picked up a set for new gladiator and the instructions aren't that clear.
Thanks for any help.
Hey thanks for the kind words and watching! Honestly i havent wired the halos up yet. Ive got a set of factory LED fender/marker lights to install and i am going to wire all of it up then. I will film it ans post. Let me look again at the wiring and ill get back with you on how it wire up. Just be careful using ez wire taps and not splicing sauldering and heat shrinking the connections. Theses run on a canbus system and wiring something in wrong can cause A LOT of problems quickly
You just had to plug the factory harness into the light to get the halo and headlight to work? I've seen other videos where they use a supplied wire harness for the halo and amber switchback(which I'm not interested in). I also have a '21 JT Willy's
If you want the halo to work as a day time running light you have to run the included harness. But if the headlights are on the halo is on just with the factory plug. Thanks for watching!
It’s plug and play DRL is automatically connected. The extra connection is if you want the turn signal function. Some jeeps might just need a flash to get the drl to work
great video, lower the background music a bit
Thanks for the feedback!
Any update on how these are
Very nice video. Can I ask if they ever fog up? I have Oracles and they are absolute disaster.
Thanks and no they dont. Ive had them for over a year with zero issues! Im pretty sure who ever makes the OEM led lights made these because they are almost identical
The link did’t work
How long have you had these installed on your jeep? I’ve had them on my gladiator for 6 months now great looking headlight but I’ve had problem with flicker of passenger unit below freezing temps.
Probably 6 months, i havent had any issue with them. The only thing i noticed is before i installed the tazer mini they would cut off but it was a programming issue in the BCM not with the lights. They have a year warranty definitly reach out to DV8 about it. Thanks for watching and the comment!
Same with mine just started doing it
Thank .
Are these fittable for the 2022/ 2023 models?
Yes they are !! Thanks for watching
Still waiting on the video on how to connect the extra wires , I know one of the extra wires on the headlights is for the day time running lights but what about that white single wire
I havent forgotten about it. Im wrapping up a prjoect this week amd will work on the wiring the very next thing. Sorry for the delay but i appreciate you keeping up with the videos
No worries great videos by the way
It’s plug and play DRL is automatically connected. The extra connection is if you want the turn signal function. Some jeeps might just need a flask to get the drl to work
No problems in the dashboard?
Sorry for the delayed response. Initially everything seemed ok. I started having my lights turning off randomly. I have since added a JL mini and solved the problem. I will post a video soon detailing the issues and the fix. Thannks for watching!!!
No problems in the dashboard?
Only issue after install is periodically they would cut off going down the road. I got a tazer mini switched the computer to LED no issues since
Where did you get your taser mini?