I'm assuming you aren't in electrical? There are just so many things wrong with this video. 1st why the hell would you want to convert energy into energy through some sort of mechanical means. You are going to lose energy from friction or heat. So for starters the process isn't even efficient and you end up with the same form of energy you got. So it would make since if he was converting some sort of mechanical mechanism to electrical ( hydro, wind, vibration). Now to the part that makes this video fake. 1st he connects a motor to a motor in series and it runs the motor which spins the band. This band is connected to another motor through a band...Why exactly? I have no idea. The motor is the thing spinning the wheels, not some sort of force between them. Also he takes a voltmeter and reads the voltage IN SERIES WITH THE MOTOR AND BATTERY. As if we even have to guess what it's going to be???? It doing to be whatever your FREAKING battery is...THIS HAS TO BE THE FAKEST CRAP I've ever seen lol. Like wtf if you are going to spend this much time making it look like you know what you are doing, why not actually build something??
no such thing as free energy. or rather the opposite i must say, because everything has been given man for free. (bud sadly people seems to give their birth right away to the Devil and hell)
Free energy is true. I placed a large magnet in front of my car and went 10km without petrol. The bus driver was not impressed when he discovered what was slowing his bus down though.
I drive with a huge magnet dangling in front of my car... Sorta like a carrot on a stick while riding a donkey... I can do 30 miles per hour while in neutral😎
By Stander bahaha 😂 very funny. I am a chick and no bugger all about generating electricity. Was trying to learn by watching vids like this...still no nothing but the laughs I have had from reading comments...Priceless...😋😂
Good job man preservation of energy from the mass of the big bearings. I really liked the way you cut two camers together missed the seam what where you hiding there?
have you tried to make this or any other similar device? do you enjoy rick and morty? would you like to enter a contest where you could win a bunch of cool free stuff? text 248 520 4164
This isn't fake, and there are no hidden batteries. This however isn't free energy. There's a motor that acts as a motor, and there's a motor that acts as a generator. The energy is then stored as kinetic energy in the flywheel. The ratio from the motor to the flywheel makes sense too, small wheel to a big wheel means that it has torque enough to store the kinetic energy into the flywheel (via rotation). Then that energy is transferred using a big wheel to a small wheel tot the motor that acts as a generator. The electricity is fed back to the motor that's keeping the flywheel alive and the flywheel in turn keeps the generator going. This works, and nothing is fake nor are there hidden batteries, I used to build this stuff for fun when I was 15. And again this isn't free energy, just a fun little device. This thing will most certainly not continue to move for years and that is because of energy loss. I learned this at engineering school, the device loses it's energy in multiple places. First there is electrical loss because of electrical resistance in the wires, then there is mechanical loss, the rubber bands, the shaft of the flywheel and gravity even make the flywheel lose momentum overtime. There is also slight electromagnetic loss in the motor that acts as a generator when the generator has an extra load like a lamp. When powering a lamp with this there is even loss of energy in the form of heat. In conclusion, yes, this thing works, but isn't free energy by a long shot, it's a fun device that, when implemented correctly, can make the battery to kickstart this thing more efficient. Oh and such a shame that there are such a boatload of people just screaming fake without any real explanation of why this isn't a free energy device, you don't really make yourself look intelligent.
Casey Luttrell you obviously have not read my comment. The initial energy comes from the battery, it loops around for a while and then dies. I explained why this thing doesnt work. Read before you comment.... smartass
Phew. It's nice seeing that intelligence still exists. But then again the people in the comment section are utter idiots, so there isn't any point in spreading the wisdom to people who are too dumb to appreciate it.
Although I did not read all the comments, lots of them are talking about inertia from the bearings. Believe me, that fan motor draws enough current that those flywheel bearings will stop faster than you think... At 6:08 the "Generator" rubber band never loosened at the top when the load was connected as it should, meaning there is a 2nd energy source hiding! I've tried this when I was a kid: I had 2 motors connect by a pen cartridge tube; wires connected or not, made no difference on force required to spin it. If this worked, you could just spin a DC motor with a flywheel and it would generate current for itself! This way you would eliminate the bearing, rubber band, and brushes friction plus there wouldn't be wires to connect. He knows it doesn't work, but look: he has over 15.5 million views... He knows what he is doing!
Congratulations! I particularly enjoyed the soldering how to - did you do it so that the anti-particles don't escape the bearings? Good thing the big ones didn't have shields or you would have most likely created a black hole, be careful with this stuff or the world as we know it will end...
Hello .Inertia motors have been around for a long time. Yes you have a free spinning dc output source with no load.However it will only give you a voltage output reading 3.5 volts dc with you motor size that is all. Any kind of load lets say a watch battery to charge on dc would stop the inertia . Even if you upgraded it to a MASSIVE MASSIVE SCALE it would have to be rectified to create ac power. This concept has been used for many school science projects. You did very well in showing how inertia works. You get a A+. As for powering a home with a MASSIVE UPGRADE in size you get a F. All you have is voltage in dc form and a nice reading of INFINITY POWER. However lighting a 1.0 volt incandescent bulb from a flashlight might be dim. You would be much better off using neodymium magnets opposed to each other for your inertia wheel.
Gotta love apartment buildings. Locate one of the neighbor's receptacles in a shared wall, wait until they're at work, Dremel into the gang box, and do some splicing into your own box. Just kidding. I'd never risk this and neither should you. For one, I'd be terrified of electrocuting myself while doing this and ending up on "1000 Ways to Die" or "World's Stupidest Criminals."
For action, smaller turnovers would make up for it. zero balance is the current resistance on the cables + the loss of energy in the engines and it comes to the fact that it is cut only by the inertia of the heavy wheel - which after a while also stops so we have a negative balance.
L. Frost well said I thought the same thing So many negative comments when it’s clearly still creative and a way of exploring options and finding new idea
have you tried to make this or any other similar device? or, because of your comment, have a more simple clever ideas? do you enjoy rick and morty? would you like to enter a contest where you could win a bunch of cool free stuff? text 248 520 4164
Do you take pleasure from comments from people saying they built it and it didn't work? fyi I noticed the split screen while you measured voltage or whatever.
have you tried to make this or any other similar device? do you enjoy rick and morty? would you like to enter a contest where you could win a bunch of cool free stuff? text 248 520 4164
the eccentric and wobbly flywheel bearing has stop spinning @ 5:58 the construction of this project is very weak and if continue spinning at hi-speed, it will collapse and destroyed: some parts will be flying everywhere.
The flywheel (the bearings) is just an energy battery using its inertia. That's what the description calls it. It would run longer without connectting the generator back to the motor.
This was great, I been tryin to find out about "make your own electricity generator" for a while now, and I think this has helped. You ever tried - Diyadison Penhloe Blaster - (do a google search ) ? It is a great one off product for generating your own electricity minus the hard work. Ive heard some great things about it and my buddy got great results with it.
Really? I’ve made one to recharge my Tesla ……it works great! I wonder why the whole world isn’t aware of this? This is the future…..I’m well impressed! However what happened at the last couple of minutes of the video? Did the rubber bands snap?
The flywheel is useles it just stores some ernergy and he needs a diod to let the energy just travel in one direktion so it cant brake it self. :D so just a bad prank the vid.
this concept will work. I have powered my shed with this. It just will not work the way they do it in this vid. U understand why people put this non working crap up but it really gets on my nerves and it is fraud an prolly illegal.
+Wise: In your fantasy you "power your shed with this". Btw, if this works, why don't you power your car, your house, (or your mommys house!), and literally everything in your life that uses power, with this concept?? Why, "I have powered", but not "i power"?? The answer is, that you pulled all that out of your ass
Perpetual power. A friend of mine told me that he had a car battery that initiated an electric motor or car alternator that ran a generator that put out more power than the electric motor needed so the generator was powering not only the electric motor running it but also had enough power to have a light bulb for years. He said he only changed the bulb and it kept going.
The use of the bearings is like the use of neodyne magnets that when used in that design would be anti gravity generating and thus this does not fly off but contributes to the flow in an interdimensional way.
Has to be real. Everyone knows the laws of thermodynamics or physics don't apply to RUclips or Facebook videos. So I'm building one to power my iron man suit right now.
Oh I already did it but it ran out of juice when the battery stopped what's up with that? I even used the pure fusion build from the same guy here on U Tube and the laser gloves and rockets all I got was snap crackle pop did I do something wrong :)
this is 100% true if you get greater motor and generator the output voltage will be higher i have understood this 6 years a go in aviation school! you only need starting power if you want you can rotate the motor by your hand and give back current to motor from the generator output it will run itself forever unless the component has failed by vibration or thermal heat or other mechanism it never stop unless you stop the input current to the motor from the generator! am trying to understand deeply the science behind this that is the most important thing it will change the world!
Cool experiment and a fun video to watch. Nothing about it is free though, power in always equals power out. Once this is loaded too heavily it would come to grinding halt and is why developing electricity requires a massive amount of force on the input side.
I have often pondered whether inertia could create over unity. Use the second motor to turn a second unit like the first. To see if the voltage drops or raises. Then scale up. 👍🏽
Despite of all the negative comments, and the science that tells us this can't work, it really does. It's a little more complicated than just two engines and bearings, but it does involve flywheels. It has been done in a larger scale, but the problems are not with the electricity generation, but with the heat and cooling and all the other things required to stabilize the stabilize the flow of energy. You probably won't hear about it anytimes soon, simply becayse you are supposed to buy electricity, like you're supposed to buy fuel. ;)
have you tried to make this or any other similar device? do you enjoy rick and morty? would you like to enter a contest where you could win a bunch of cool free stuff? text 248 520 4164
have you tried to make this or any other similar device? do you enjoy rick and morty? would you like to enter a contest where you could win a bunch of cool free stuff? text 248 520 4164
Hacker 007 why? Do you believe more in spoken words than in what your own eyes see? those laws of physics were invented by people who are also wrong, that is why you will mentally close yourself to new possibilities? And if you do not believe why do not you check for yourself if what is done in the video is true?
This MIGHT have been a passable magic trick if he'd shown the back of the bearing housings during testing. Also during the testing the magnets (for balance) 😉 were missing.
Have you ever heard of magnetic energy and emf and how it is generated. If you are able to do this without a magnet, it makes some sense, never mind initial push (kinetic energy) from outside the system.
@@sebastiantinsley9812 However I had a chain loop on an oil rig made continus and added another pulley ofset just under the main pulley, pulled the chain and it kept running for two years. That gave me the Idea to build a elaborate system that puts out 10,000 watts for free forevermore at no cost using earths gravity and after 40years with no electric bill yay.
@@sebastiantinsley9812 Well that's easy take a long chain put together as a continues loop and put it on a pulley designed for a chain, then pull it, it will run for a minute then stop. Now add a pully just under that offset to the right so the chain on that right side is off centerd and pull it. It will spin forever. I'm sure you could think of a way to add weights that lever out on one side and in on the other side. The higher and longet it is the and more weight used the more power you get.
I don't think earths gravity is going to change anytime soon. The free fall or "g"constant is the differential of the two circular motions of the earth. 32.1740485563ft/s^2. It is always the same, and an acceleration towards the center of earth as an implosion field and work no matter where you are on earth.
I think perhaps there is enormous kinetic energy built up in the speed the bearings are spinning and that is why it holds a reading. How long it holds that would have been the evidence. But I do feel there is something in this bearing assembly that captures the best type of stored, or at least a good way to store kinetic energy.
The only reason this is possible is due to the large rotating mass on the shaft. This keeps the 'reaction' going. Eventually it will slow down with a static load, a light bulb would kill it. This doesn't take a masters degree or PhD in Physics or Mechanical Engineering to figure out (Then again from these comments I'm reading, maybe it does). The motors are acting as a gear that is synced with the large rotating mass. If you notice he got the system up to required RPM with a battery, removed the battery and the rotating mass became the 'battery'. Battery's are not producing energy they are simply a means of storage and transport, electricity isn't an energy source either, again just a means of transport. He converted battery/volts into inertia, and removed the 'electrical input' and coupled the motors by means of electricity and as well as a similar shaft with varying ratio's. The rotating mass is no different than the battery, it's just storing energy waiting for release back to electricity, very cool demo actually. I would be interested to see how long it maintained, loaded and unloaded. There is some loss with the belts, however this wouldn't work with gears, too much mechanical loss. This is not free energy, it's just efficient way of converting from one form to another in closed loop. The magnets in these motors are very weak iron ferrite they do not poses that much power.
myke you do not understand kinetic energy, or how is you turn a motor you can get AC electricity out of it. this is beyond your knowledge and ability to process information and logic.
Jesse Fritz I tried a much simpler version of this a year or so ago and using a 9 volt I made about 10.5volts on the meter but then again it was probably a much lower current . I’ve heard of people claiming free energy by pitting an inverter on a car battery to run a charger to recharge the source battery 😆so have fun trying to explain the truth to the masses
The axle allows bearings to spin, when the bearings spin that makes the gears spin also. So when the gears spin, it is turning the generator conducting electricity. When that electricity goes to those wires to that motor, that motor is helping the gears spin making the bearing spin faster so that the weight of the bearings don't stop spinning. So that you can conduct more electricity. When he hooks it up to the fan, that is called a pigtail, so the power can travel in more than one circuit.
have you tried to make this or any other similar device? do you enjoy rick and morty? would you like to enter a contest where you could win a bunch of cool free stuff? text 248 520 4164
Slightly surprised at how many people who chose to watch a “free energy” video wouldn’t entertain the idea of this being possible. Maybe the naive see the click bait title. I saw the thumbnail. This setup will totally work btw. Try and be more civil folks. Tbh I always regret reading comments due to the fact that the most ignorant are always the most outspoken..
He is using the energy stored up in the flywheel during startup. If he left the fan connected it would stop the device buy dissipating the stored energy. If he left the voltmeter connected you would see the voltage drop. None of these things work and never will. If it worked he should be able to start it by putting a small amount of energy into the flywheel (the bearings) by hand and it should speed up on its own. But it doesn't. Because it doesn't work.
He's not even storing mechanical energy in a flywheel. He's just got the two motors wired up in series. One of the wire "connecting" the two motors never appears in frame. It's just wired up to a battery off screen.
The top portion of the flywheel is never in frame when everything is connect up and running, its possible the fly wheel was attached to a hidden motor or compressed air spinning it
have you tried to make this or any other similar device? do you enjoy rick and morty? would you like to enter a contest where you could win a bunch of cool free stuff? text 248 520 4164
the only "free" energy comes from forces of nature like Water... Earth... Fire... Air. Long ago, the four nations lived together in harmony. Then everything changed when the Fire Nation attacked. Only the Avatar, master of all four elements, could stop them. But when the world needed him most, he vanished. A hundred years passed and my brother and I discovered the new Avatar, an airbender named Aang. And although his airbending skills are great, he still has a lot to learn before he's ready to save anyone. But I believe Aang can save the world.
This question MIGHT have been asked before, and I am SORRY if it might have been asked, it is that I am too lazy to look through ALL of the comments to try and find out the answer. BUT why at 6:52 that the video screen go’s black ??? And as a lot will know that there is NO thing as FREE energy. As you are having to start it all off with the power (energy) from the battery or some other power source. I could think of a few things that MIGHT make it work a bit better. As if you could harvest some of the generated electricity to charge the battery, then you would ALWAYS have power to RE-POWER the driver motor. Also if you had put on the flywheel a magnet 🧲 then also put a reed switch close to the flywheel, then every time that the magnet came close enough to the reed switch, you could put a small kick of electricity back into the driver motor to sustain the movement of the flywheel. I am NOT into electronics, but I have a bit of an understanding in that field. As if someone made a circuit to count a set number of rotations and also a set amount of time that power from the battery can be on for, then I feel that would work even better. As let’s just say that the flywheel was to do 500 rotations in a minute, then the power to the driver motor would power on every 0.12 of a second. As I do NOT think that would do any good to the battery or the driver motor. But if within them 500 rotations of the flywheel, the power was to be switched on for 2 or 3 seconds, then that would be better. I know an other thing that could be added to make it run more efficient. That would be to add some sort of OPTICAL device to measure the speed of the flywheel. As with just a bit of experimentation, you could work out what the TOP SPEED of the flywheel would be, and then also work out at what speed more power would be needed to get the flywheel back up to it’s top speed, then once it was back up to that speed, the power from the battery would then be turned off so that it could recover enough charge from the generating side. This would replace the need for the magnet and the reed switch. I also know (but do NOT know how to do it) that you can add some sort of circuit to do a thing (I think it is called flip flop) that will charge up a battery, but once that battery is FULLY charged, switch to a second battery and then charge that up, then when the main batteries power dropped to a level that was still enough to drive the driver motor, then that could be once more have to power to fully charge that back to full power. That would be fantastic if you had a power bank to save any unused generated power. If you had a motor that was strong enough to rotate a LARGER and HEAVIER flywheel, then that MIGHT be able to start to first power the generator side to produce enough power to power up the driver motor just by using a pull cord, in the same way as you would start up a lawnmower. That would be if the battery that you had was flat for any reason. As the kinetic power from the flywheel would rotate enough to self power it. Then once it was running, then it would start to power the charging circuit to charge up the battery to keep it running. Well we ALL know that the one failing of this sort of device, is good old FRICTION ☹️💔☹️ So to make it as balanced as you can would help it to run better, also to use the RIGHT sort of LUBRICANT. I am in NO WAY getting ANY sort of PAYMENT or other benefits from me mentioning this produce, but if you can get your hands on a lubricant by the name of “TriFlow / Tri-Flow” I am NOT saying that this lubricant is the best, but I can only tell you that I have used it in the past for many things, and have found it to be a VERY GOOD lubricant. I know that you can buy it in spray-can’s (200ml for around £15 / $17.50 / €17.46) and also in a smaller plastic bottle of 2oz (about 56•8ml’s for around £9 / $10.50 / €10.48. In the SAME style of bottle, you also can get a 6oz (177ml) that is priced at around £16.15 / $18.85 / €18.80. But them prices do NOT include any P & P that might be added to that cost. As I have seen so many things that look as if they do NOT cost a lot, BUT only to see that the P & P is set as a STUPIDLY EXPENSIVE and EXTRAVAGANT cost, sometimes the item that you might be buying might cost just £10 but the P & P could be as much as £30 to £40. I just do NOT know or understand how someone can add that much EXTRA cost to ship an item. But that is NOT what this post is about. I would be VERY INTERESTED to see ANYONE who can understand my thoughts and can translate them into a working device and also the relevant circuit boards that would do the sort of things that I have put into this post. As I know from what would be a relevant small investment of time and the RIGHT electronic equipment, that a thing like that could be made to power up a SECOND or even THIRD device, all with LARGER and HEAVIER flywheels to finally power a generator to produce a 240V 60Hz AC system for use in the UK. The ONLY reason that I came to this video, was I had seen a long winded promotion from an American guy telling how HE got the plans for FREE from an Australian guy. But the thing that makes me so MAD about that sort of advertising video, is that they tell you a story that is NEVER-ENDING about whatever it is that they are trying to sell, but they NEVER give you that FREE information that they had been given for FREE in the first place. They tell you the full life story, without giving you the punchline. It is like someone going to tell you the BEST and FUNNIEST joke in the world that they got told. But when it comes to the punchline, YOU have to PAY them YOUR MONEY for something that they had been given for FREE. If I had been given something for FREE that would benefit others, I would do one of two things. As if I had been told NOT to pass on that information to ANYONE, then I would keep my big mouth shut and keep that information to myself. Or I would GIVE that information FREELY to ANYONE who asked me for it. If I did want to cover my time and any costs involved by getting someone to make a professional video, I would NOT first ASK for any MONEY off anyone. I would just ask that if any person that got the information from me, and that information had been used to make whatever it was, then I would ASK for a DONATION of a few pounds or dollars toward any cost that I may of incurred. Anything UNDER £5 /$5 or €5. And out of that money I would be only too HAPPY to GIVE 50% of that money to charitable causes. As I am NOT the sort of man to want to make a fortune out of something that I had been given for FREE. As the SOBB-STORY that you get told on them videos are NOT to make it look that person is doing it for PROFIT, but it is to make it look as if they are doing mankind (and womankind) a MASSIVE service. But let’s NOT pussyfoot around the subject, it is an ADVERT to generate MONEY. Well I do HOPE that someone can get back to me with any FREE help, as if it is NOT FREE, then it is NOT HELP. Like I have put, I do NOT know anything about electronics, but I know the things that I have mentioned in this message are ALL doable to a person who has the knowledge. As I would LOVE to see someone who can develop my ideas, as I bet that what I have came up with, someone in some part of the world will have done something similar or along the same lines. It JUST needs someone to connect the dots together to create something alone would be used for some other purpose. Well I will THANK anyone who gets back to me, as we might be able to bounce ideas off each other. As sometimes that is how it works, two different people with two different disciplines to create something FANTASTIC. BYE FROM JOHN IN ENGLAND
You can never put more energy back as you first put in. You can convert it to lower voltage but only with lost amperage. You can convert lower to higher amperage but with Lost of Voltage too. If you convert or not, every time you put energy in a system you lost energy and they want to convert in temps. The ohmic law can never be bypassed.
as the song goes...I got some ocean front property in Arizona...and if you'll buy that I'll throw the Golden Gate in free...klik bait...and we ate the hook-line & sinker...lol :)
try using a car alternator 140 amp a 12v or 24 v electric motor to spin the alternator a 12v car battery a 4000 watt power inverter ....it doesn't take an evil genius like me to figure it out lal;as f lole.....
it does work we built something similar out of walk mans in the 90's. (school project , like 8th grade maybe) ive also seen an ohm inducter that would generate like 3 volts of electricity just from people being near it. in the 90s out of a record players needle hooked to various transistors and a Walkman motor.. its not rocket science guys.. schematics, are readily available all over google.
I use a harbor freight 6hp engine and a 63amp 2wire gm alternator with a small brown extension. Cord. And run just fast enough to keep running, will run all day powering fridge fan lights maintaining charge. Tops out about 12.7 volts runs 4-7 hours on one gallon of gas.
We need to be concentrating on extracting the most efficient energy not wasting time looking for free energy when was the last time you got somthing decent for free.
How bout you focus on extracting more energy and leave other people to attain free energy. Negative people like you should keep your opinions to yourselves. If we adhered to your mindset we would still be in the stone age!
First of all, "free" isn't meant to be taken literally, it is used as slang to denote something that is not paid for, as in oil, so to take that term literal, means your not in tune with up to date slang grammar used by people. Secondly, the sun shines without anyone paying for it to do so, and in our life span, every bit of it will be for free, there is no price we pay for it, not one cent, so technically, your wrong, there is one source of free energy right there. The universe setup a benevolent force to provide life for us. There are other benevolent forces we can attain energy from that we don't pay for that we term as free. Broaden your perspective!
And say if someone does discover somthing If the big companies can't make money from it then it won't see the light of day The only way forward is efficient energy that can still be charged for and faze out the big companies slowly otherwise they will hold back any progress Big energy companies won't become obsolete quietly
JABB You are completely off track from the intent of this video. The video claims to have a free energy device. Not operated by the Sun ect.. The video is bullshit. Thinking otherwise means you should have paid attention in class.
@@qazmatronISMYNAME what does that even mean "Look, each bearing saves 35%. Three bearings save 105%. There ya go!" your comment makes no sense whatsoever...What exactly are you saving 105% of what---your credibility in commenting ? Also if you watched correctly,there are six bearings in that contraption..observation is everything..
@@nickshevlin4063 Each bearing saves 35% of the energy that would be lost without that bearing. With three bearings, the dynamical system saves 3 x 35% = 105%. It saves more power than it loses or, in other words, it gains power from nothing. (There ya go, free energy!) More bearings, more free energy. Forget plastics, solar cells, and nuclear. Mark my words. The future is BALL BEARINGS. (Just lube 'em up with a little snake oil.)
When the grid goes down and this guy has lights.. whether it's just 1 or a few bulbs glowing... more than the rest of the nation... then I bet all the nay sayers will wish they tried it and seen for themselves.. obviously cant create lots of power.. but a light when its dark.. huge benefit !
can't create ANY POWER, it's just a MECHANICAL BATTERY commonly called a FLYWHEEL he would literally have lights running for LONGER by just connecting them to the battery he used to start the thing spinning. that said with having something that could be spun by hand or by some other method, like say attached in place of a bicycle tire and the person sits on the bicycle and peddles you could use your chemical energy converted to mechanical energy to have something like this convert the mechanical energy to electrical, but in that scenario YOU are basically the battery used to start the whole thing off.
@@loripatterson7882 and so will this and you would get LESS electricity out of having the battery run this then connecting the battery straight to the flashlight.
I thought of something like this when it comes to electric cars. Why don't they hook generators by shaft drive to wheels on cars. If you have 4 generators being turn while going down the road if should be enough to keep battery charged. If vehicle is stopped like in a traffic jam a automatic clutch system would kick in disengaging the wheels from generator. The electric motor would engage that would turn the generators while sitting still. Once vehicle picks up a certain speed the clutch system would kick in and reengage the wheels to the generators. Basically you would never have recharge your car and it can go unlimited miles without stopping.
Although, they might be some flat batteries under the board that would explain it`s elevation but fake or not, it does inspire new ideas with bearings for examples.
@@michaelwier1222 Overall, any circuit will consume energy. It is impossible for you to create energy. Friction, wire resistance, heat loss, gravity, and other factors make this idea inefficient and ineffective.
Yeah I did something similar, don’t know why all the negative comments. I just hooked up 3 magnets and a motor , tuned it to 8.8mzh and connected it to the earths rotation, currently it’s powering my 1000 tonne induction furnace🤪😘
There is no such thing as free energy, only energy conversion. And you can never fully (100%) convert one energy to another due to it converting to other types of energy, e.g: Kinetic; Gravity; Friction...etc...
Over time, the equal amount of charge used from the battery pack to power all of this would be equal to the *total amount discharged (-) minus energy losses due to heat, vibration, electrical function* etc. That would then be equal the remaining charge left in the battery.
It is essentially a Kinetic Capacitor....Like the one in the Car called a Flywheel... There are already large ones, but have a 50/50 chance of blowing up.
Развлечения
![Eminem - Tobey (feat. Big Sean & Babytron) [Official Audio]](http://i.ytimg.com/vi/9xn0OHEZZ8Q/mqdefault.jpg)
I build it and it works fine. I dont know why so many negative comments
I'm assuming you aren't in electrical? There are just so many things wrong with this video. 1st why the hell would you want to convert energy into energy through some sort of mechanical means. You are going to lose energy from friction or heat. So for starters the process isn't even efficient and you end up with the same form of energy you got. So it would make since if he was converting some sort of mechanical mechanism to electrical ( hydro, wind, vibration).
Now to the part that makes this video fake. 1st he connects a motor to a motor in series and it runs the motor which spins the band. This band is connected to another motor through a band...Why exactly? I have no idea. The motor is the thing spinning the wheels, not some sort of force between them. Also he takes a voltmeter and reads the voltage IN SERIES WITH THE MOTOR AND BATTERY. As if we even have to guess what it's going to be???? It doing to be whatever your FREAKING battery is...THIS HAS TO BE THE FAKEST CRAP I've ever seen lol. Like wtf if you are going to spend this much time making it look like you know what you are doing, why not actually build something??
So apparently he didn't show what he hooked his first motor up to, I just assumed it was a battery lol. That's what makes the video really fake.
D
X
no such thing as free energy.
or rather the opposite i must say, because everything has been given man for free. (bud sadly people seems to give their birth right away to the Devil and hell)
@@jesuschristislordoflordsan427
just try it. you will see it works
Free energy is true. I placed a large magnet in front of my car and went 10km without petrol. The bus driver was not impressed when he discovered what was slowing his bus down though.
I drive with a huge magnet dangling in front of my car... Sorta like a carrot on a stick while riding a donkey... I can do 30 miles per hour while in neutral😎
sorry, b ut this is stupid hahaha,,, I think I need to try this
Thanks now I got to google this..
😂🤣🤣🤣
Hahaha
I love watching videos like this. Not because of the video it self, reading the roasting of this video on the comment section is the best part 😂😂
I thought I was the only one 👍🏼
me too :-)
By Stander bahaha 😂 very funny. I am a chick and no bugger all about generating electricity. Was trying to learn by watching vids like this...still no nothing but the laughs I have had from reading comments...Priceless...😋😂
Especially if the creator of the video is too stupid to admit that it is fake.
Same! :D
Good job man preservation of energy from the mass of the big bearings. I really liked the way you cut two camers together missed the seam what where you hiding there?
have you tried to make this or any other similar device? do you enjoy rick and morty? would you like to enter a contest where you could win a bunch of cool free stuff? text 248 520 4164
@@langolier9 thats a really weird way to advertise but ok
@@annabelle5640 his last name is pretty close to the word strange so no surprise his weird way of advertising.
I watch a lot of DIY VDO
s but this has been the best informative VDo EVER I mean ever ...
This isn't fake, and there are no hidden batteries. This however isn't free energy.
There's a motor that acts as a motor, and there's a motor that acts as a generator. The energy is then stored as kinetic energy in the flywheel. The ratio from the motor to the flywheel makes sense too, small wheel to a big wheel means that it has torque enough to store the kinetic energy into the flywheel (via rotation). Then that energy is transferred using a big wheel to a small wheel tot the motor that acts as a generator. The electricity is fed back to the motor that's keeping the flywheel alive and the flywheel in turn keeps the generator going.
This works, and nothing is fake nor are there hidden batteries, I used to build this stuff for fun when I was 15. And again this isn't free energy, just a fun little device. This thing will most certainly not continue to move for years and that is because of energy loss.
I learned this at engineering school, the device loses it's energy in multiple places. First there is electrical loss because of electrical resistance in the wires, then there is mechanical loss, the rubber bands, the shaft of the flywheel and gravity even make the flywheel lose momentum overtime. There is also slight electromagnetic loss in the motor that acts as a generator when the generator has an extra load like a lamp. When powering a lamp with this there is even loss of energy in the form of heat.
In conclusion, yes, this thing works, but isn't free energy by a long shot, it's a fun device that, when implemented correctly, can make the battery to kickstart this thing more efficient.
Oh and such a shame that there are such a boatload of people just screaming fake without any real explanation of why this isn't a free energy device, you don't really make yourself look intelligent.
Mick Houtveen where the hell did the energy come from Smart ass... Energy can't be created nor stored... Just transferd
Casey Luttrell you obviously have not read my comment. The initial energy comes from the battery, it loops around for a while and then dies. I explained why this thing doesnt work. Read before you comment.... smartass
Phew. It's nice seeing that intelligence still exists. But then again the people in the comment section are utter idiots, so there isn't any point in spreading the wisdom to people who are too dumb to appreciate it.
Of course energy can be stored, what the hell is wrong with you?
there is a magnet to keep flywheel at speed (3.17)so unless the magnet dies (never will) it will run till a motor burns out.
That's flywheel energy storage, but fun to watch!
No u would start it by spinning the flywheel
Qué bien... Un 7,0 👍 para ti.. Y saludos 🖐️de Temuco Chile 😉
Although I did not read all the comments, lots of them are talking about inertia from the bearings. Believe me, that fan motor draws enough current that those flywheel bearings will stop faster than you think... At 6:08 the "Generator" rubber band never loosened at the top when the load was connected as it should, meaning there is a 2nd energy source hiding! I've tried this when I was a kid: I had 2 motors connect by a pen cartridge tube; wires connected or not, made no difference on force required to spin it. If this worked, you could just spin a DC motor with a flywheel and it would generate current for itself! This way you would eliminate the bearing, rubber band, and brushes friction plus there wouldn't be wires to connect. He knows it doesn't work, but look: he has over 15.5 million views... He knows what he is doing!
Did I miss something or did he use a 3.7v battery to create a 3.4v output. Wonderful.
Congratulations! I particularly enjoyed the soldering how to - did you do it so that the anti-particles don't escape the bearings? Good thing the big ones didn't have shields or you would have most likely created a black hole, be careful with this stuff or the world as we know it will end...
Hello .Inertia motors have been around for a long time. Yes you have a free spinning dc output source with no load.However it will only give you a voltage output reading 3.5 volts dc with you motor size that is all. Any kind of load lets say a watch battery to charge on dc would stop the inertia . Even if you upgraded it to a MASSIVE MASSIVE SCALE it would have to be rectified to create ac power. This concept has been used for many school science projects. You did very well in showing how inertia works. You get a A+. As for powering a home with a MASSIVE UPGRADE in size you get a F. All you have is voltage in dc form and a nice reading of INFINITY POWER. However lighting a 1.0 volt incandescent bulb from a flashlight might be dim. You would be much better off using neodymium magnets opposed to each other for your inertia wheel.
its working for him..he is paying his electric bill via youtube!
First
I just get free energy from my neighbors.
like bro
Gotta love apartment buildings. Locate one of the neighbor's receptacles in a shared wall, wait until they're at work, Dremel into the gang box, and do some splicing into your own box.
Just kidding. I'd never risk this and neither should you. For one, I'd be terrified of electrocuting myself while doing this and ending up on "1000 Ways to Die" or "World's Stupidest Criminals."
JMGRICH lol
WHAT? I'm your neighbour!
Lol me to
For action, smaller turnovers would make up for it. zero balance is the current resistance on the cables + the loss of energy in the engines and it comes to the fact that it is cut only by the inertia of the heavy wheel - which after a while also stops so we have a negative balance.
L. Frost well said I thought the same thing So many negative comments when it’s clearly still creative and a way of exploring options and finding new idea
Free energy- just connect an extension to your neighbours socket outlet!.
Nice
All is fine until they see and disconnect you
have you tried to make this or any other similar device? or, because of your comment, have a more simple clever ideas? do you enjoy rick and morty? would you like to enter a contest where you could win a bunch of cool free stuff? text 248 520 4164
Love the comment Nicole Tesla and the kai n family God rest there souls
Thug life...low.
Do you take pleasure from comments from people saying they built it and it didn't work?
fyi I noticed the split screen while you measured voltage or whatever.
Me too! :P
What split screen???
@@wiktorjachyra1869 3:58 - 4:13 go in full screen. You'll see a line down the middle and his finger is off.
have you tried to make this or any other similar device? do you enjoy rick and morty? would you like to enter a contest where you could win a bunch of cool free stuff? text 248 520 4164
the eccentric and wobbly flywheel bearing has stop spinning @ 5:58 the construction of this project is very weak and if continue spinning at hi-speed, it will collapse and destroyed: some parts will be flying everywhere.
The flywheel (the bearings) is just an energy battery using its inertia. That's what the description calls it. It would run longer without connectting the generator back to the motor.
Makes total sense, its about gearing, small motor uses less power than the larger generator can provide once the large flywheel gets to speed
Congratulations, you just invented a flywheel. All you're doing is storing energy in angular momentum.
I'll store my energy in your angular momentum.
No it’s rotengular rotation magnetic fields that store energy also I’m a nasa agent
This was great, I been tryin to find out about "make your own electricity generator" for a while now, and I think this has helped. You ever tried - Diyadison Penhloe Blaster - (do a google search ) ? It is a great one off product for generating your own electricity minus the hard work. Ive heard some great things about it and my buddy got great results with it.
@@GeneralGravys you don't know what you're getting into... It's could be some disgusting creepy guy in a basement with a sexy profile picture...
@@sockjam877 most likely lmao
WOW. When I visited the local power plant there were 4 of these powering the entire city. NOT.
Ratheadskulls shill pos. What the average pay? 🙄
Trying to bring it back? You're cool, not.
Really? I’ve made one to recharge my Tesla ……it works great! I wonder why the whole world isn’t aware of this? This is the future…..I’m well impressed!
However what happened at the last couple of minutes of the video? Did the rubber bands snap?
Deberías colocar la descripción de los materiales que usas. (Tipos de motores, medidas de los rodajes, etc ... ). Saludos desde Perú.
Thanks for sharing this video... I am interesting
It is fake bec at 3:58 watch in full screen video has minor differential line
Explain differential lines?
harkirat singh
harkirat singh made this he has attached a wire
I saw it too. Hid what he was doing under half of the video.
harkirat singh
It may work but definitely it will not last longer due to loss of energy and hence loss in inertia in this process and law of conservation of energy
Agreed! . It will not last due to loss of flywheel inertia.
I didn't even understand what was supposedly happening?
The flywheel is useles it just stores some ernergy and he needs a diod to let the energy just travel in one direktion so it cant brake it self. :D so just a bad prank the vid.
this concept will work. I have powered my shed with this. It just will not work the way they do it in this vid. U understand why people put this non working crap up but it really gets on my nerves and it is fraud an prolly illegal.
+Wise: In your fantasy you "power your shed with this".
Btw, if this works, why don't you power your car, your house, (or your mommys house!), and literally everything in your life that uses power, with this concept?? Why, "I have powered", but not "i power"??
The answer is, that you pulled all that out of your ass
Powerfully! Simply! Useful! Succinctly!
Ok for starting purpose we need some power may I know the connection chart
I woken up my neighbours with this video...
Seems suspicious to use a battery to initiate the device when a simple hand spin would suffice.
Perpetual power. A friend of mine told me that he had a car battery that initiated an electric motor or car alternator that ran a generator that put out more power than the electric motor needed so the generator was powering not only the electric motor running it but also had enough power to have a light bulb for years. He said he only changed the bulb and it kept going.
The use of the bearings is like the use of neodyne magnets that when used in that design would be anti gravity generating and thus this does not fly off but contributes to the flow in an interdimensional way.
4:08 rift of dimension XD
Thought it was real till i saw below 100000% fake, then saw this and it makes perfect sense
many of project depends on fake below 100000% but some of failed to get fake video as perfect sense.
7172 mehkma
Drew Crowther fkfhjg
Has to be real. Everyone knows the laws of thermodynamics or physics don't apply to RUclips or Facebook videos. So I'm building one to power my iron man suit right now.
yes you can build one but it wont power anything but itself and after some time it will stop working du too friktion and lose of power
@@swekiller98 you do realise that the person commenting above you was being VERY sarcastic lol.
It’s the government Botanical advantage pulley system in power anything for free
Oh I already did it but it ran out of juice when the battery stopped what's up with that? I even used the pure fusion build from the same guy here on U Tube and the laser gloves and rockets all I got was snap crackle pop did I do something wrong :)
you are very creative bro. how this tractor works looks like real 👍
great video. this is really helpful
All it needs is some unobtanium cells and a flux converter and presto
And a sprinkle of upsidaisium!
I think maybe you mean Flux Capacitor 😊
And don't forget the dilithium Crystals!
Scarface 39 its not a time machine
@@superlamagamerplaylists9600 it's a WASTE OF time machine
Why is it tearing space in the middle of video, this must be too powerful tech. Don't leave it on or you my cause global warming.
it tears the time and space ))) zero point module inside.
this is 100% true if you get greater motor and generator the output voltage will be higher i have understood this 6 years a go in aviation school! you only need starting power if you want you can rotate the motor by your hand and give back current to motor from the generator output it will run itself forever unless the component has failed by vibration or thermal heat or other mechanism it never stop unless you stop the input current to the motor from the generator! am trying to understand deeply the science behind this that is the most important thing it will change the world!
Agree with Mick Houtveen. What we see there is an Overunit, isnt a free energy, BUT , stored kinetic energy as Chass Chandler in Australia.and work.
Cool experiment and a fun video to watch. Nothing about it is free though, power in always equals power out. Once this is loaded too heavily it would come to grinding halt and is why developing electricity requires a massive amount of force on the input side.
Other similar constructs have recorded actual over unity which physics says is impossible
Primarily for asian poverty to overcome nothing at all. You atleast need fans their. Its too damn hot and humid in a lot of it.
I have often pondered whether inertia could create over unity. Use the second motor to turn a second unit like the first. To see if the voltage drops or raises. Then scale up. 👍🏽
Because of the bigger driven roller you can double the amount of energy produced ;) So 3,8V made from initial 2,4 V ;)
Super I make this is working 😍
Thanks you so much
Despite of all the negative comments, and the science that tells us this can't work, it really does. It's a little more complicated than just two engines and bearings, but it does involve flywheels. It has been done in a larger scale, but the problems are not with the electricity generation, but with the heat and cooling and all the other things required to stabilize the stabilize the flow of energy.
You probably won't hear about it anytimes soon, simply becayse you are supposed to buy electricity, like you're supposed to buy fuel. ;)
well said:)
Take the battery 🔋out of the equation and it ain’t “free”!! Yeh, I said “ain’t” and I mean it!! 😡😡😡 (but it does work) 😉😉😉. 👍👍👍
have you tried to make this or any other similar device? do you enjoy rick and morty? would you like to enter a contest where you could win a bunch of cool free stuff? text 248 520 4164
A flywheel can store a certain amount of a kinetic energy. But it will end up!
The technology is very interesting. May I know for how long will the free energy generator work once it is started?
have you tried to make this or any other similar device? do you enjoy rick and morty? would you like to enter a contest where you could win a bunch of cool free stuff? text 248 520 4164
GUYS IT WORKS! all you have to do it hook a battery to it!
it is cool that people are still watching this "Free Energy" videos for fun :-)
yeah , hopefully everybody knows, this shit would hurt (?) the laws of thermodynamics
Hacker007,
Mind that you yourself have seen this for fun..
:-)
Hacker 007 why? Do you believe more in spoken words than in what your own eyes see? those laws of physics were invented by people who are also wrong, that is why you will mentally close yourself to new possibilities? And if you do not believe why do not you check for yourself if what is done in the video is true?
ridiculous comment.
@@Rucruter why do people not understand that there's no such thing as free energy and if there was why aren't we using it answer that
This MIGHT have been a passable magic trick if he'd shown the back of the bearing housings during testing.
Also during the testing the magnets (for balance) 😉 were missing.
You saw the Voltage rise with power source unplugged.. is't this "magic enought ? :)
This is a good prototype...must try with bigger motor- like a treadmill and washing machine motor.
Have you ever heard of magnetic energy and emf and how it is generated. If you are able to do this without a magnet, it makes some sense, never mind initial push (kinetic energy) from outside the system.
Lol wires leading to the battery off screen 😂
Low of conservation = energy can be neither be created nor be distroed it can be converted one form to another form
frickin bingo
@@sebastiantinsley9812 However I had a chain loop on an oil rig made continus and added another pulley ofset just under the main pulley, pulled the chain and it kept running for two years. That gave me the Idea to build a elaborate system that puts out 10,000 watts for free forevermore at no cost using earths gravity and after 40years with no electric bill yay.
@@alberttorres4917 how my boy
@@sebastiantinsley9812 Well that's easy take a long chain put together as a continues loop and put it on a pulley designed for a chain, then pull it, it will run for a minute then stop. Now add a pully just under that offset to the right so the chain on that right side is off centerd and pull it. It will spin forever.
I'm sure you could think of a way to add weights that lever out on one side and in on the other side. The higher and longet it is the and more weight used the more power you get.
I don't think earths gravity is going to change anytime soon. The free fall or "g"constant is the differential of the two circular motions of the earth. 32.1740485563ft/s^2.
It is always the same, and an acceleration towards the center of earth as an implosion field and work no matter where you are on earth.
I think perhaps there is enormous kinetic energy built up in the speed the bearings are spinning and that is why it holds a reading. How long it holds that would have been the evidence. But I do feel there is something in this bearing assembly that captures the best type of stored, or at least a good way to store kinetic energy.
You could 3d print a set of gears/transfer case that would allow you to pump out the power without getting to carried away with motors
Ok, now you built it, What is it good for?, what will it power?
The only reason this is possible is due to the large rotating mass on the shaft. This keeps the 'reaction' going. Eventually it will slow down with a static load, a light bulb would kill it.
This doesn't take a masters degree or PhD in Physics or Mechanical Engineering to figure out (Then again from these comments I'm reading, maybe it does). The motors are acting as a gear that is synced with the large rotating mass. If you notice he got the system up to required RPM with a battery, removed the battery and the rotating mass became the 'battery'. Battery's are not producing energy they are simply a means of storage and transport, electricity isn't an energy source either, again just a means of transport. He converted battery/volts into inertia, and removed the 'electrical input' and coupled the motors by means of electricity and as well as a similar shaft with varying ratio's. The rotating mass is no different than the battery, it's just storing energy waiting for release back to electricity, very cool demo actually. I would be interested to see how long it maintained, loaded and unloaded.
There is some loss with the belts, however this wouldn't work with gears, too much mechanical loss.
This is not free energy, it's just efficient way of converting from one form to another in closed loop.
The magnets in these motors are very weak iron ferrite they do not poses that much power.
those who call it scam was brainwashed or troll hired by big brother :)
there is a battery in the "genarator" so essentually its a battery driving a motor not really a novel idea
myke you do not understand kinetic energy, or how is you turn a motor you can get AC electricity out of it. this is beyond your knowledge and ability to process information and logic.
rubbish electricity is my job and hobby i made things like this as a kid. The kinetic energy in the flywheel would soon be used up. .
Jesse Fritz I tried a much simpler version of this a year or so ago and using a 9 volt I made about 10.5volts on the meter but then again it was probably a much lower current . I’ve heard of people claiming free energy by pitting an inverter on a car battery to run a charger to recharge the source battery 😆so have fun trying to explain the truth to the masses
Guys I love such creative videos that's why I watch this channel 😜
This is really works guys. But because of there will be energy loss then it would not stand forever but could weeks or months maybe.
If you put four bearings as a flywheel instead of only two you will be able to provide electricity to your whole country.
All of these intelligent people in the comments do any of you know how to create time travel or store time
Technically we are all time travelers but very slow one at that
The axle allows bearings to spin, when the bearings spin that makes the gears spin also. So when the gears spin, it is turning the generator conducting electricity. When that electricity goes to those wires to that motor, that motor is helping the gears spin making the bearing spin faster so that the weight of the bearings don't stop spinning. So that you can conduct more electricity. When he hooks it up to the fan, that is called a pigtail, so the power can travel in more than one circuit.
have you tried to make this or any other similar device? do you enjoy rick and morty? would you like to enter a contest where you could win a bunch of cool free stuff? text 248 520 4164
wow...a sign of intelligence in the comment section.
Slightly surprised at how many people who chose to watch a “free energy” video wouldn’t entertain the idea of this being possible. Maybe the naive see the click bait title. I saw the thumbnail. This setup will totally work btw. Try and be more civil folks. Tbh I always regret reading comments due to the fact that the most ignorant are always the most outspoken..
IKR omg lol
Bruh, it just aint possible to make infinite/free energy, unless you steal your neighbors energy but when they find out you will pay the price.
He is using the energy stored up in the flywheel during startup. If he left the fan connected it would stop the device buy dissipating the stored energy. If he left the voltmeter connected you would see the voltage drop. None of these things work and never will. If it worked he should be able to start it by putting a small amount of energy into the flywheel (the bearings) by hand and it should speed up on its own. But it doesn't. Because it doesn't work.
Fuk Hue 8
He's not even storing mechanical energy in a flywheel. He's just got the two motors wired up in series. One of the wire "connecting" the two motors never appears in frame. It's just wired up to a battery off screen.
The top portion of the flywheel is never in frame when everything is connect up and running, its possible the fly wheel was attached to a hidden motor or compressed air spinning it
it has literally baterie on screen
New awesome video
RIP 2nd law, the first day of the universe - Oct 1, 2017
sadly, I live in the wrong universe :)
😂
maybe he will build a phase shifter foe you. we can all just warm space-time and join another reality
have you tried to make this or any other similar device? do you enjoy rick and morty? would you like to enter a contest where you could win a bunch of cool free stuff? text 248 520 4164
I did not think, but I built it ... extraordinary, it works!
I enjoy your video friend
the only "free" energy comes from forces of nature like Water... Earth... Fire... Air. Long ago, the four nations lived together in harmony. Then everything changed when the Fire Nation attacked. Only the Avatar, master of all four elements, could stop them. But when the world needed him most, he vanished. A hundred years passed and my brother and I discovered the new Avatar, an airbender named Aang. And although his airbending skills are great, he still has a lot to learn before he's ready to save anyone. But I believe Aang can save the world.
there is no free energy from water, wind, fire and so on. it's free money wise but not in physics
jordan johnson zxx
jordan johnson
Lol 😂
jordan johnson CARTOONS
Avatars and shit videos that explain notta! How did I end up here?
you know i get free power from hydro and turning house celling fans in good clean power in the wind great stuff
This question MIGHT have been asked before, and I am SORRY if it might have been asked, it is that I am too lazy to look through ALL of the comments to try and find out the answer. BUT why at 6:52 that the video screen go’s black ??? And as a lot will know that there is NO thing as FREE energy. As you are having to start it all off with the power (energy) from the battery or some other power source.
I could think of a few things that MIGHT make it work a bit better. As if you could harvest some of the generated electricity to charge the battery, then you would ALWAYS have power to RE-POWER the driver motor. Also if you had put on the flywheel a magnet 🧲 then also put a reed switch close to the flywheel, then every time that the magnet came close enough to the reed switch, you could put a small kick of electricity back into the driver motor to sustain the movement of the flywheel. I am NOT into electronics, but I have a bit of an understanding in that field. As if someone made a circuit to count a set number of rotations and also a set amount of time that power from the battery can be on for, then I feel that would work even better.
As let’s just say that the flywheel was to do 500 rotations in a minute, then the power to the driver motor would power on every 0.12 of a second. As I do NOT think that would do any good to the battery or the driver motor. But if within them 500 rotations of the flywheel, the power was to be switched on for 2 or 3 seconds, then that would be better.
I know an other thing that could be added to make it run more efficient. That would be to add some sort of OPTICAL device to measure the speed of the flywheel. As with just a bit of experimentation, you could work out what the TOP SPEED of the flywheel would be, and then also work out at what speed more power would be needed to get the flywheel back up to it’s top speed, then once it was back up to that speed, the power from the battery would then be turned off so that it could recover enough charge from the generating side. This would replace the need for the magnet and the reed switch.
I also know (but do NOT know how to do it) that you can add some sort of circuit to do a thing (I think it is called flip flop) that will charge up a battery, but once that battery is FULLY charged, switch to a second battery and then charge that up, then when the main batteries power dropped to a level that was still enough to drive the driver motor, then that could be once more have to power to fully charge that back to full power. That would be fantastic if you had a power bank to save any unused generated power.
If you had a motor that was strong enough to rotate a LARGER and HEAVIER flywheel, then that MIGHT be able to start to first power the generator side to produce enough power to power up the driver motor just by using a pull cord, in the same way as you would start up a lawnmower. That would be if the battery that you had was flat for any reason. As the kinetic power from the flywheel would rotate enough to self power it. Then once it was running, then it would start to power the charging circuit to charge up the battery to keep it running. Well we ALL know that the one failing of this sort of device, is good old FRICTION ☹️💔☹️
So to make it as balanced as you can would help it to run better, also to use the RIGHT sort of LUBRICANT.
I am in NO WAY getting ANY sort of PAYMENT or other benefits from me mentioning this produce, but if you can get your hands on a lubricant by the name of “TriFlow / Tri-Flow” I am NOT saying that this lubricant is the best, but I can only tell you that I have used it in the past for many things, and have found it to be a VERY GOOD lubricant.
I know that you can buy it in spray-can’s (200ml for around £15 / $17.50 / €17.46) and also in a smaller plastic bottle of 2oz (about 56•8ml’s for around £9 / $10.50 / €10.48. In the SAME style of bottle, you also can get a 6oz (177ml) that is priced at around £16.15 / $18.85 / €18.80. But them prices do NOT include any P & P that might be added to that cost. As I have seen so many things that look as if they do NOT cost a lot, BUT only to see that the P & P is set as a STUPIDLY EXPENSIVE and EXTRAVAGANT cost, sometimes the item that you might be buying might cost just £10 but the P & P could be as much as £30 to £40. I just do NOT know or understand how someone can add that much EXTRA cost to ship an item. But that is NOT what this post is about.
I would be VERY INTERESTED to see ANYONE who can understand my thoughts and can translate them into a working device and also the relevant circuit boards that would do the sort of things that I have put into this post.
As I know from what would be a relevant small investment of time and the RIGHT electronic equipment, that a thing like that could be made to power up a SECOND or even THIRD device, all with LARGER and HEAVIER flywheels to finally power a generator to produce a 240V 60Hz AC system for use in the UK.
The ONLY reason that I came to this video, was I had seen a long winded promotion from an American guy telling how HE got the plans for FREE from an Australian guy. But the thing that makes me so MAD about that sort of advertising video, is that they tell you a story that is NEVER-ENDING about whatever it is that they are trying to sell, but they NEVER give you that FREE information that they had been given for FREE in the first place.
They tell you the full life story, without giving you the punchline. It is like someone going to tell you the BEST and FUNNIEST joke in the world that they got told. But when it comes to the punchline, YOU have to PAY them YOUR MONEY for something that they had been given for FREE.
If I had been given something for FREE that would benefit others, I would do one of two things. As if I had been told NOT to pass on that information to ANYONE, then I would keep my big mouth shut and keep that information to myself. Or I would GIVE that information FREELY to ANYONE who asked me for it. If I did want to cover my time and any costs involved by getting someone to make a professional video, I would NOT first ASK for any MONEY off anyone. I would just ask that if any person that got the information from me, and that information had been used to make whatever it was, then I would ASK for a DONATION of a few pounds or dollars toward any cost that I may of incurred. Anything UNDER £5 /$5 or €5. And out of that money I would be only too HAPPY to GIVE 50% of that money to charitable causes. As I am NOT the sort of man to want to make a fortune out of something that I had been given for FREE.
As the SOBB-STORY that you get told on them videos are NOT to make it look that person is doing it for PROFIT, but it is to make it look as if they are doing mankind (and womankind) a MASSIVE service. But let’s NOT pussyfoot around the subject, it is an ADVERT to generate MONEY.
Well I do HOPE that someone can get back to me with any FREE help, as if it is NOT FREE, then it is NOT HELP.
Like I have put, I do NOT know anything about electronics, but I know the things that I have mentioned in this message are ALL doable to a person who has the knowledge. As I would LOVE to see someone who can develop my ideas, as I bet that what I have came up with, someone in some part of the world will have done something similar or along the same lines. It JUST needs someone to connect the dots together to create something alone would be used for some other purpose.
Well I will THANK anyone who gets back to me, as we might be able to bounce ideas off each other. As sometimes that is how it works, two different people with two different disciplines to create something FANTASTIC.
BYE FROM JOHN IN ENGLAND
U did a good creativity. Can try on litter bigger model. Good luck
You can never put more energy back as you first put in. You can convert
it to lower voltage but only with lost amperage. You can convert lower
to higher amperage but with Lost of Voltage too. If you convert or not,
every time you put energy in a system you lost energy and they want to
convert in temps. The ohmic law can never be bypassed.
Yep!
Thank you for that info. .
Jonny -- Congress has finally repealed the Ohmic Law. You can now build your generator and make free electricity.
as the song goes...I got some ocean front property in Arizona...and if you'll buy that I'll throw the Golden Gate in free...klik bait...and we ate the hook-line & sinker...lol :)
If Al Gore gets his way, your property will be a sea front property.
There is always losses.
try using a car alternator 140 amp a 12v or 24 v electric motor to spin the alternator a 12v car battery a 4000 watt power inverter ....it doesn't take an evil genius like me to figure it out lal;as f lole.....
George Strait.
Amtap2-patag@ajdtp@p0uwdalpju
HOW MUCH FOR BRIDGE ? AND WHERE IN ARIZONA DO YOU HAVE OCEAN ?? I THINK YOU ARE FAKING ME
Nice loop
But as soon as you draw enough power the EM drag equaling the draw will bring it to a screeching halt
it does work we built something similar out of walk mans in the 90's. (school project , like 8th grade maybe) ive also seen an ohm inducter that would generate like 3 volts of electricity just from people being near it. in the 90s out of a record players needle hooked to various transistors and a Walkman motor.. its not rocket science guys.. schematics, are readily available all over google.
ROFL - that split-screen starting @3:55 ! What was that intended for ? 🤭👻
i,need this very important to the poor
philip tolibas 😂😂😂😂Lmaoo Keep on waiting lol
I use a harbor freight 6hp engine and a 63amp 2wire gm alternator with a small brown extension. Cord. And run just fast enough to keep running, will run all day powering fridge fan lights maintaining charge. Tops out about 12.7 volts runs 4-7 hours on one gallon of gas.
Hii sir can you plz elaborate the things which you have use in this project plz it helps alot in my project
We need to be concentrating on extracting the most efficient energy not wasting time looking for free energy when was the last time you got somthing decent for free.
How bout you focus on extracting more energy and leave other people to attain free energy. Negative people like you should keep your opinions to yourselves. If we adhered to your mindset we would still be in the stone age!
First of all, "free" isn't meant to be taken literally, it is used as slang to denote something that is not paid for, as in oil, so to take that term literal, means your not in tune with up to date slang grammar used by people. Secondly, the sun shines without anyone paying for it to do so, and in our life span, every bit of it will be for free, there is no price we pay for it, not one cent, so technically, your wrong, there is one source of free energy right there. The universe setup a benevolent force to provide life for us. There are other benevolent forces we can attain energy from that we don't pay for that we term as free. Broaden your perspective!
And say if someone does discover somthing
If the big companies can't make money from it then it won't see the light of day
The only way forward is efficient energy that can still be charged for and faze out the big companies slowly otherwise they will hold back any progress
Big energy companies won't become obsolete quietly
sun power is not free. you pay with your life. the sun will kill you.
JABB
You are completely off track from the intent of this video.
The video claims to have a free energy device. Not operated by the Sun ect.. The video is bullshit. Thinking otherwise means you should have paid attention in class.
I smell other power, in large motor? Always one motor you not battery test before final connect.
Look, each bearing saves 35%. Three bearings save 105%. There ya go!
@@qazmatronISMYNAME what does that even mean "Look, each bearing saves 35%. Three bearings save 105%. There ya go!"
your comment makes no sense whatsoever...What exactly are you saving 105% of what---your credibility in commenting ?
Also if you watched correctly,there are six bearings in that contraption..observation is everything..
@@nickshevlin4063 Each bearing saves 35% of the energy that would be lost without that bearing. With three bearings, the dynamical system saves 3 x 35% = 105%. It saves more power than it loses or, in other words, it gains power from nothing. (There ya go, free energy!) More bearings, more free energy. Forget plastics, solar cells, and nuclear. Mark my words. The future is BALL BEARINGS. (Just lube 'em up with a little snake oil.)
Appreciable
Upper part of bearing is hiding works great. Trusted site.
Я так ещё в 5 классе пытался получить нобелевскую:-)))
Родители за премией не отпустили?)))
Чето ты запоздал) обычно эта теория опровергается лет в 9-10)))
When the grid goes down and this guy has lights.. whether it's just 1 or a few bulbs glowing... more than the rest of the nation... then I bet all the nay sayers will wish they tried it and seen for themselves.. obviously cant create lots of power.. but a light when its dark.. huge benefit !
Just buy a flashlight
@@matthewparker007 Batteries die..
can't create ANY POWER, it's just a MECHANICAL BATTERY commonly called a FLYWHEEL he would literally have lights running for LONGER by just connecting them to the battery he used to start the thing spinning.
that said with having something that could be spun by hand or by some other method, like say attached in place of a bicycle tire and the person sits on the bicycle and peddles you could use your chemical energy converted to mechanical energy to have something like this convert the mechanical energy to electrical, but in that scenario YOU are basically the battery used to start the whole thing off.
@@loripatterson7882 and so will this and you would get LESS electricity out of having the battery run this then connecting the battery straight to the flashlight.
I thought of something like this when it comes to electric cars. Why don't they hook generators by shaft drive to wheels on cars. If you have 4 generators being turn while going down the road if should be enough to keep battery charged. If vehicle is stopped like in a traffic jam a automatic clutch system would kick in disengaging the wheels from generator. The electric motor would engage that would turn the generators while sitting still. Once vehicle picks up a certain speed the clutch system would kick in and reengage the wheels to the generators. Basically you would never have recharge your car and it can go unlimited miles without stopping.
Although, they might be some flat batteries under the board that would explain it`s elevation but fake or not, it does inspire new ideas with bearings for examples.
Right said thought that I had
It's not fake but also not free energy. Will not run continuously forever and any load applied will drastically shorten how long it will run.
fake hai
Thanks you
Dave can't see what thousands can.
Dave: Exactly
Dave Rogers this isn’t true either as energy is constantly being lost to the surroundings through friction, sound and heat
A taser gun runs off a 9 volt battery yet produces 1 million volts. Must be free energy too hahaha.
Volts don't do any work, amps do the work
@@michaelwier1222 yeah im aware of everything going on here.
@@michaelwier1222 Overall, any circuit will consume energy. It is impossible for you to create energy. Friction, wire resistance, heat loss, gravity, and other factors make this idea inefficient and ineffective.
Yeah I did something similar, don’t know why all the negative comments. I just hooked up 3 magnets and a motor , tuned it to 8.8mzh and connected it to the earths rotation, currently it’s powering my 1000 tonne induction furnace🤪😘
Thinking outa box nice mate.
There is no such thing as free energy, only energy conversion. And you can never fully (100%) convert one energy to another due to it converting to other types of energy, e.g: Kinetic; Gravity; Friction...etc...
well if a dam can make energy,the cost is recovered after a few years so its can be free if you have the right water ways and placements
Ролики такого рода это загадки где надо угадать где находятся батарейки :)
классика жанра, под доской
@@user-fb5qx5rv7u или в большом моторчике.
Over time, the equal amount of charge used from the battery pack to power all of this would be equal to the *total amount discharged (-) minus energy losses due to heat, vibration, electrical function* etc.
That would then be equal the remaining charge left in the battery.
yep no carnot round here
wow😯
ایول داداش 😅
4:07 Okay, you can see this is DEFINITELY fake, since they tried editing the video to make it seem like it worked.
In my household we follow the laws of Conservation of Energy.
.
Lucky. My dad forces me to follow the laws of THERMODYNAMICS!"
@@connect2reality nice Simpsons reference!
It is essentially a Kinetic Capacitor....Like the one in the Car called a Flywheel... There are already large ones, but have a 50/50 chance of blowing up.