Thanks for the video and sharing your knowledge with us. Your video was great just straight info and instruction no annoying music or silliness trying to be funny, breath of fresh air 😊 new subscriber
This! This sled is literally everything I've been wanting to put into making myself a new sled. Thanks so much for sharing this! You just saved me some brain power and we know I need that 🤣 Great Video RockStar 😎🤘🏼 Keep them coming please
Good looking build and that will be a very useful addition to your shop. One comment; when you are gluing up plywood for the fence, it's a good idea to glue up against a flat reference surface. Plywood is very prone to flexing especially in thin strips and it's important for the front fence to be dead flat.
Good video. I'm glad to see you coming out of the 3 project series where you don't show any actions. You are now showing the process, which is super important for beginners especially to see. Keep up the good work. Too, I really appreciate the surveys you send out. It helps me to think about my own work as well. FYI - You have a nervous habit of clasping your hands together when there is nothing between you and the camera. Just a little something to work on.
Glad you enjoyed the video and the polls and quizzes. I'm aiming to balance between builds and the 3 project series a bit more. I've always had a need to keep my hands busy, which is why I love woodworking, and so when I'm talking on camera my hands for some reason need to keep moving, hence the clasping. I will keep an eye on this more for sure though, thanks for the feedback 😁.
New subscriber here! Nice sled. I do like the 2 cut method compared to the 5 cut. I'm always looking for an easier, more efficient way. Thanks for sharing your knowledge and talent. Greetings from Maine!
I made a smaller sled for majority of my projects. Much lighter. I had a spare miter gage to use as one runner and wood for other. I made sure the base was square at back and right sides. Other 2 sides can be wonky. My back fence is attached to the base edge instead of on top of the base like every other people do. Before assembly I cut a rip kerf on the fence where it meets the base to prevent dust accumulation from affecting the accuracy. Blade protection added onto fence for safety.
My only thought is the stop needs to be about 1mm shorter with a slight bevel on the inside edge to stop any dust that may get caught IMO. Looks great and look forward to more content 👍🏻🇦🇺
I really like this sled! May I offer some advice for your videos? When you're talking to the camera, I would suggest not having someone follow you, but have the camera on a tripod and make sure to stay in frame. It's kind of annoying seeing the camera panning side to side
Hey thanks! The camera actually follows me on a gimble that only moves when I move. That said, I will definitely think about this for future videos. Thanks for watching and happy new year!
@@TimberDesigns they are mostly 1/4 - 20. I have seen some bigger. Their flange slides nicely in track. I have ground some edges when track is too narrow usually due to track design. Not all tracks are consistent between brands.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Best DIY sled for the average person. Thank you
No problem, thanks for watching!
Nice to see that mistakes have not been edited out. Makes this realistic. Thanks!
Of course, thanks for watching!
Thanks for the video and sharing your knowledge with us. Your video was great just straight info and instruction no annoying music or silliness trying to be funny, breath of fresh air 😊 new subscriber
Thanks very much Joe, appreciate it!! 😁
This! This sled is literally everything I've been wanting to put into making myself a new sled. Thanks so much for sharing this! You just saved me some brain power and we know I need that 🤣 Great Video RockStar 😎🤘🏼 Keep them coming please
Haha that's awesome Kat, you're welcome and will do!!
Just in time, My next project!
Thanks for keeping it real.
Perfect, thanks for watching!!!!
Like the sled and the 2 cut method. I need one but it will have to be smaller, all I have is a 10" contractor saw. Dave & The Girls
You can absolutely build this one on a smaller scale and it would be just as good 😁. I only built a larger one as I do crosscut longer pieces
Good looking build and that will be a very useful addition to your shop. One comment; when you are gluing up plywood for the fence, it's a good idea to glue up against a flat reference surface. Plywood is very prone to flexing especially in thin strips and it's important for the front fence to be dead flat.
Great point, thanks for watching!
Looks a great sled. I really enjoyed watching the process.
Thanks so much!! 😁
Good video. I'm glad to see you coming out of the 3 project series where you don't show any actions. You are now showing the process, which is super important for beginners especially to see. Keep up the good work. Too, I really appreciate the surveys you send out. It helps me to think about my own work as well.
FYI - You have a nervous habit of clasping your hands together when there is nothing between you and the camera. Just a little something to work on.
Glad you enjoyed the video and the polls and quizzes. I'm aiming to balance between builds and the 3 project series a bit more.
I've always had a need to keep my hands busy, which is why I love woodworking, and so when I'm talking on camera my hands for some reason need to keep moving, hence the clasping. I will keep an eye on this more for sure though, thanks for the feedback 😁.
New subscriber here! Nice sled. I do like the 2 cut method compared to the 5 cut. I'm always looking for an easier, more efficient way. Thanks for sharing your knowledge and talent. Greetings from Maine!
Greetings and thanks so much! The 2 cut is definitely easier and ensures it's 90 on both sides of the blade, all that matters.
Great Video as always!!!
Thanks so much!
I made a smaller sled for majority of my projects. Much lighter. I had a spare miter gage to use as one runner and wood for other. I made sure the base was square at back and right sides. Other 2 sides can be wonky. My back fence is attached to the base edge instead of on top of the base like every other people do. Before assembly I cut a rip kerf on the fence where it meets the base to prevent dust accumulation from affecting the accuracy. Blade protection added onto fence for safety.
That's awesome!
Safety first says the guy wearing flip flops 🙂 Thanks for sharing. Appreciate your videos.
Haha I know, I gapped in putting on shoes lol. Thanks so much!
Xin chào bạn xin chúc mừng 🎉🎉🎉
Thank you!
My only thought is the stop needs to be about 1mm shorter with a slight bevel on the inside edge to stop any dust that may get caught IMO. Looks great and look forward to more content 👍🏻🇦🇺
Thanks for the comment, Great point about the slight bevel too!
nice sled.
Thanks so much!
@@TimberDesigns welcome. I've made several sleds but none with t track..this would be a good upgrade.
It really is. You could also cut dovetails instead and use Microjig hardware or clamps instead. I thought about doing this before the t-track.
@@TimberDesigns i have a set or two of the microjig clamps that i havnt used yet...i'm a slacker..
@myhoneyshandmade1077 lol I love those clamps, they're so handy and versatile! I use them on my jointing jig also
I really like this sled! May I offer some advice for your videos? When you're talking to the camera, I would suggest not having someone follow you, but have the camera on a tripod and make sure to stay in frame. It's kind of annoying seeing the camera panning side to side
Hey thanks! The camera actually follows me on a gimble that only moves when I move. That said, I will definitely think about this for future videos. Thanks for watching and happy new year!
A toilet bowl bolt works great in t track
That's a great thought, and are most a 1/4" 20 bolt? I have quite a few and never thought of trying them.
@@TimberDesigns they are mostly 1/4 - 20. I have seen some bigger. Their flange slides nicely in track. I have ground some edges when track is too narrow usually due to track design. Not all tracks are consistent between brands.
@kenerickson4923 I agree, they are all different