I'm always happy to see danger Dan get to work on his own car. Seems like he always lending a hand to everyone else and sacrificing his own time that he can spend on his car. A true car buddy. keep rockin dan🤘🏼
Hyped to see this car come together. Actually puts the time it takes to build something in perspective, instead of these other youtubers. Who just do a complete build in a day.
Finally!...this is the damn video ive been waiting for! I'd love to work on a car with you dan. IMO you're the most mechanically inclined man in that shop! you work your but off and it shows.
Hey Dan, after watching you work on all kinds of rebuild, fab work and suspension mods I have to say that you are very thorough and do most everything correctly. HOWEVER, after watching you install the rear suspension arms on this 240 SX I have a small complaint. There IS NO caster on non-steering rear wheels. There is no way to calculate caster unless the wheels turn and have some camber change during turning. Sorry to call you out but well, you understand.... And before you call me out there is one vehicle that has rear caster but it needs a special alignment rack to accomplish the alignment. It is the M-series Mercedes SUV.
Bolt on engine mounts, Dan is spoiling himself and I approve. After the rotatory pit truck engine mount perfection he shouldn't have to fabricate them anymore
Hey Dan, I think a Chevy Colorado 5spd with a Toyota bell housing would have avoided alot of the shifter mods. It's basically Chevy's r154, they also came in Pontiac solstices. Lots of Supra guys run them because of the availability and price is way less than a r154!
love u guys. u should link up with people in Australia for example and have a show for them like tangents or a build show to show different perspectives from different countries
I hope that there will be a grommet or something put in where those lines go through the bellhousing. All I can see is fluid everywhere when the hoses wear through.
If you could swap a 2JZ in to any chassis, what would it be?
My shitty ford fiesta 2006
My mom's 2006 Camry
Woodcar.
This chassis
the hilux chassis
I never get bored of watching dan turn wrecks into shred ready monsters
Fuckin truth
ewan winder 🧢🧢🧢
Imagine what he does with the ladies
we need so see more videos of him shredding them tho
Hoonigan, you guys are lucky to have Dan.
Without Dan we would just have a pile of broken cars. Dan is the man...
Episodes with dan could be over an hour long and I’d still watch
I'd prefer them to be over an hour long
Same, but I wouldn't even notice an hour go by.
Absolutely 100% agree
They could be as long as a jre and i would watch.
I'm always happy to see danger Dan get to work on his own car. Seems like he always lending a hand to everyone else and sacrificing his own time that he can spend on his car. A true car buddy. keep rockin dan🤘🏼
Dan is such a good mechanic he should have his own show on youtube or something and let people watch him build awesome cars.
Seems like theres just Dan and Zac running Hoonigan these says
Not mad at all!!
Yeah! Mr. DangerDan is finally back with his build! Can't wait to hear that 2JZ *Song of the People!* 🔥
The music of 6 Cylinders orchestrated by a Gtx35.
Been waiting for this episode of stuff inspection for a while, can't wait to see this thing rip
We’re ready for Dan to throw down in the Burnyard! It’s been long over due.
Dan is contractually obliged to have a different state of beard in every appearance he makes on the Hoonigan channels. 👱🏻♂️👨🏼🧔🏼
It’s easy for Dan to do, because he can grow a full beard over night.
@@HooniganProjectGarage Is Jon Chase jealous?
State of beard, great band name.
@@icebreakertech or just simplify it, The Beards
Since EVERYONE there is beard-equipped, are the lady employees obliged to observe said standard?
Hoonigan project cars is by far the best channel y’all have. Keep up the good work
It’s amazing how much Dan can get done in a day... I feel like things that take me a whole day on my car he can bang out in 15 minutes
What are you guys gonna do with the ls e36 m3
God I love watching dan at work. Hes entertaining yet down to business.
I love it when these guys are in the shop wrenching away. Great videos, great content, awesome builds. Keep up the excellent work guys.
Seems that all my favorite episodes are of Dan, Brad, or Blake building some cool shit! Oh, and a 2JZ in an old Z car seems like a no-brainer.
Dan is THE MAN! Keep on keeping on so you can send it.
For the Horde!!!
Always love watching Dan work.
It’s so much easier to watch some else work then actually working. It feels so good!
Dan is the shit, zac is growing on me. I appreciate the way he held up the rules on build and battle.
When is Dan going to finish this car? I remember when he started this he said it was going to be a quick build, so he could shred with Hert and Vin.
This is my favorite build on the chanel! Everything Dan touches is gold 👌
I love when Dan builds shit. He explains and shows stuff so well. You rock bro!
Dan is my favorite. He always brings such interesting content.
Hyped to see this car come together. Actually puts the time it takes to build something in perspective, instead of these other youtubers. Who just do a complete build in a day.
is there a car u didnt build Dan?! .. i think they r using u too much . u are an employee more than a skumbag .. love u broo . keep up the magic
The welds on the shift extension are art
Love seeing Dan work on his own wheels!
I love how the torque wrench clicks after 90 degrees. I have to find that setting on mine :D
Ayyy shoutout to the boys at Koru Works! Those guys are awesome!!!
I could watch dan work on cars for hours
@2:42 I really like that they showed Danger Dan putting on a pair of safety glasses
Finally!...this is the damn video ive been waiting for! I'd love to work on a car with you dan. IMO you're the most mechanically inclined man in that shop! you work your but off and it shows.
Zac should be a movie star. Just had that look about him. Super troopers or some sh!t
Zac could be a stunt double for Fabio.
The stunt double for the detective guy in "something about mary"
Finally ! More danger dan, noice! I can't wait to see this thing finished.
Dan’s always got the most fire instrumentals💥
Great job Dan, I'm amazed at how well you did before you got your tools from Boxo, now you don't have to search for the right tools anymore.
Awesome stuff, Dan! Should put a rubber grommet on the hole for the release bearing hoses too.
Sick!!! Awesome job guys!
This is my new favorite channel you guys ROCK! ✌️
Dan gets more done in one day than most people do in one year.
Dan makes working on cars look easy.
Dan’s new tool box is the sauce. The envy is real 🤯
Thanks for watching lift noise
Hey Dan, after watching you work on all kinds of rebuild, fab work and suspension mods I have to say that you are very thorough and do most everything correctly. HOWEVER, after watching you install the rear suspension arms on this 240 SX I have a small complaint. There IS NO caster on non-steering rear wheels. There is no way to calculate caster unless the wheels turn and have some camber change during turning. Sorry to call you out but well, you understand.... And before you call me out there is one vehicle that has rear caster but it needs a special alignment rack to accomplish the alignment. It is the M-series Mercedes SUV.
Really Awsm! Dan the Man is killn it!! Love the info n the breakdown, keep these coming!
Dan is putting those fancy new tools to work 👌
I’m looking forward to this build more than my own
Dude! Killer swap!! I’m looking forward to hearing this monster!
It’s gonna to be a perfect shred car!
Can't wait to see this thing shred a set 👌🏻
I’ve been waiting for this video to drop
We felt that you needed this video Angel, that’s why we released it on time!
Dan: “The show where i dont have to sing the introoooooo.......”
Also Dan: “Staff Inspeeeeectioooon” ~singing
I'm 15 and I still have to struggle with the "where the fuck is the 10mm at!"
That’s a problem we all experience no matter what the age is.
@@HooniganProjectGarage if hoonigan ever comes to gateway drag strip in st Louis Missouri I wanna know
Kasey is gonna be Boss Level Builder after Dan's car is done
I'd sweep the shop floor just to learn from these guys
You and Casey can be best friends!
Any info on when we are going to see Scotto's cars again?
Besides that, your car is turning out pretty nice
You would see them on this channel, as soon as he actually has time to start working on his cars again...
Dan in the back flexing. 💪💪
Dan probably hearted the comment haha
We need to see more of that C10
Zacs getting his staff inspection episode ready.
Hoonigan Project Cars ayyyyyyy
What was the name of that song playing when u were uninstalling the intake manifold?
You guys are the best keep up the good work!! Watch every video!
As long as you all keep watching, we will keep making videos!
8:05 the content we are HERE for
snacks are an important part of every build
Bolt on engine mounts, Dan is spoiling himself and I approve. After the rotatory pit truck engine mount perfection he shouldn't have to fabricate them anymore
The advantage of swapping a popular engine into a popular chassis. All the hard guess work is almost taken out of it!
can we get more videos of this build?
I've always wanted to see a high compression, high revving, ITB 2j in a 240sx
Subscribed off this vid. Seem like a chill guy and good build footage. Keep up the good work
Dan the man of 1,000,000 uses one day I shall be as knowledgable . Personal goal 💯
That tool box is a life saver
It’s coming along great dan! This is cool but I still wanna see the purple Beamer!
Goooood morning!!!! This is the way to start the day
Waking up to Dan on a Saturday always makes everything better!
Vin and Dan going to be rolling like hoonigans own tandem or die 👌
3:30 Dan trying to flex on everybody 😂😂💪💪💪😎
Can't wait to see this car shed!!!
Woooohoo!!! Love some Danger Dan content!!
Waking up to Danger Dan on a Saturday makes everything better.
I saw Dan's post yesterday and I was waitin
Hey Dan, I think a Chevy Colorado 5spd with a Toyota bell housing would have avoided alot of the shifter mods. It's basically Chevy's r154, they also came in Pontiac solstices. Lots of Supra guys run them because of the availability and price is way less than a r154!
In Dan we trust!!
So they actually scumbagged Dan enough to go single
love u guys. u should link up with people in Australia for example and have a show for them like tangents or a build show to show different perspectives from different countries
We would love to link up with the Aussies as you guys always build bad ass projects, and none of you are afraid to throw down!
I would live to see hoonigans go international.
Hoonigan down under (Aussies)
Far east hooning (Japan)
Das hooning (Germany)
Royal hoonigan (UK).
Cant wait to see this thing ripppp 🔥🔥🔥
To be clear, THIS is what we want.
Thanks for being clear. Now we know what we are going to give you.
Keep it up.. lots of work to be done but, I want to see this girl on a dyno soon. Best of luck!!!🤓🤓
Danger Dan is Jr Swoll - look at those guns 🍻
Mini Arnold!
could watch a full build vlog like hour long video size of dan killing it.
Dan Dan he's our man if he can't do it no one can ha ha ha love itttttttttt
We are hiring Hoonigan Cheer Leaders if you know any looking for work...
Dan the man, the myth, the legend
I can't wait to see Dan shredding with Vinny
Dan need to sing 'Staff Inspection' in Ghostbusters beat
Can't wait to see it finished and rap snacks are 🔥 🔥 you can learn from watching Dan.
Liked just for that 2013 Montage Parody bit you put in the promo
I hope that there will be a grommet or something put in where those lines go through the bellhousing. All I can see is fluid everywhere when the hoses wear through.
dayyyuummm need to get me some of them johnnies and that 2j/r154 combo for my current swap project 😉
dan finally gets a good toolbox, but he still has to assemble his engine on a pallet. Someone sponsor him an engine stand.
Ha! One step at a time, we are getting Dan everything he needs to build a space shuttle.
Dont forget to Grommet those Clutch lines Boss. Vibrations will eat them alive!!!!
Oooo good thought.... those line will still shred.
Damn dan the s14 is gonna rip for sure can’t wait 👌🏽
Need more videos with dan hes a good teacher!!!!!!!!!!!!
Watching this, I just want to build cars and learn stuff with Dan :D
I still sang "Garage Garaaageeeee" in my head.
More Dan stuff 🙌👑👑👑👌
Alright. Wasn't an ad. Sorry guys. Still my favorite channel.
3:49 😂😂 I got scared and then laughed for 5 minutes straight
Dans face when he pulled out that rear main seal😂😂😂