very good video help me a lot ..I took the course about a few years back (2017)..and this video jog my memory..all I need 2 do is practice and keep watching your videos..thank you.
This was quite usefull. I didn't get why you'd want those initial anchors, but i can actually use that in my work instead of my usual workflow. I survey corrosion damage on anythin rusty, and i'd like a better way of displaying the damage than what i do currently, which is: I create primitives (usually a cylinder i.e pipe) and reference all measurements to that or those primitives. I then create a colourmap, making sure that all primitives are within a fair tolerance (we rarely have the opportunity to do a complete circumferal scan) and end up with any pitting clearly displayed. But the range is usually so large that the colourmap is less precise than i'd like and dotting measuments by "feel" to find the deepest pit is less than optimal. So, is there are way for me to mark out, let's say 50 areas of interrest and find the deepest pit in a reasonable way that's presentable to our clients? I'd need precise measurents of each pit displayed without having 50 different colourmaps. Happy new year, and thanks.
Hi, Sorry for the late reply. There isn't an easy way to do this. We have done something similar for some of our customers in the past however it involves writing a macro. This is something that we do charge for as a service. If you would like to know more about this please contact us here - 3dscanners.co.uk/contact-us/
@@3DScannersUK thank you for replying. I'll have to make do without your services at this point in time, but I'll keep your offer in mind should I need said macro at a later time. In the meantime I'll do it the manual way.
Hi, you will see the nominals for the XYZ values appear by default. For the actuals you will have to either of probed or extracted the feature. Providing the feature type has an eligible dimensional control for an XYZ position.
Hi, if you have CAD and you are aligned to your data then go to select, data points, using reference object surfaces and select all data within a specified distance of your CAD. Now invert this selection by clicking Ctrl + I and hit delete. Make sure you only have your data visible when doing this though as you can delete the CAD if you're not careful. Hope this helps.
Sir, how should we prepare the report of chassis part of four wheeler vehicle? Sir, please make a video of that and upload it on your RUclips channels.
The radius measurement can be switched on through the geometry controls. Hopefully this helps! If you require further information, you could also get in touch with your local PolyWorks supplier.
very good video help me a lot ..I took the course about a few years back (2017)..and this video jog my memory..all I need 2 do is practice and keep watching your videos..thank you.
Thank you for your comment Leo. Please don't hesitate to get in touch if you require any further support.
This was quite usefull. I didn't get why you'd want those initial anchors, but i can actually use that in my work instead of my usual workflow. I survey corrosion damage on anythin rusty, and i'd like a better way of displaying the damage than what i do currently, which is: I create primitives (usually a cylinder i.e pipe) and reference all measurements to that or those primitives. I then create a colourmap, making sure that all primitives are within a fair tolerance (we rarely have the opportunity to do a complete circumferal scan) and end up with any pitting clearly displayed. But the range is usually so large that the colourmap is less precise than i'd like and dotting measuments by "feel" to find the deepest pit is less than optimal. So, is there are way for me to mark out, let's say 50 areas of interrest and find the deepest pit in a reasonable way that's presentable to our clients? I'd need precise measurents of each pit displayed without having 50 different colourmaps.
Happy new year, and thanks.
Hi, Sorry for the late reply. There isn't an easy way to do this. We have done something similar for some of our customers in the past however it involves writing a macro. This is something that we do charge for as a service. If you would like to know more about this please contact us here - 3dscanners.co.uk/contact-us/
@@3DScannersUK thank you for replying. I'll have to make do without your services at this point in time, but I'll keep your offer in mind should I need said macro at a later time. In the meantime I'll do it the manual way.
Great, thx for dis! is there a tutorial video for editing reports and creating a template?
Hello question when using point or feature labels how do I keep as a default so whenever I create a feature the nominal actual and xyz always appear
Hi, you will see the nominals for the XYZ values appear by default. For the actuals you will have to either of probed or extracted the feature. Providing the feature type has an eligible dimensional control for an XYZ position.
My everyday job :)
@3:07 how did you clean up the scanned data?
do you have any video link for this?
Hi, if you have CAD and you are aligned to your data then go to select, data points, using reference object surfaces and select all data within a specified distance of your CAD. Now invert this selection by clicking Ctrl + I and hit delete. Make sure you only have your data visible when doing this though as you can delete the CAD if you're not careful. Hope this helps.
Sir, how should we prepare the report of chassis part of four wheeler vehicle? Sir, please make a video of that and upload it on your RUclips channels.
does anyone know if polyworks have student version?
Hi @fiveaxisv5 , there are some Universities that have a student version. Please let us know what you need it for? Maybe we can help.
Sir, how to measure radius in any object
The radius measurement can be switched on through the geometry controls. Hopefully this helps! If you require further information, you could also get in touch with your local PolyWorks supplier.
can we compare two stl in this software
Hi Balaji. Yes, we can compare two stl in PolyWorks. If you would like to find out more, please get in touch on here - 3dscanners.co.uk/contact-us/
@@3DScannersUK is there any trial version of this software available
Good 👍👍👍
Nice
Any training course available in India send. Details
Hi, please contact PolyWorks India - www.polyworksindia.com
6:04
Can me give job
Hindi language