flysky fs i6x 2x 3 position switch
HTML-код
- Опубликовано: 4 окт 2024
- 3 position switch easy to change.
3 Position Long Toggle Switch : is.gd/bux2Za
2 Position Long Toggle Switch : is.gd/5oFObp
3 and 2 pos. switch : is.gd/bXnuSp
Flysky fs-i6x : goo.gl/kzLfLX
Flysky fs-i6 : goo.gl/tP1fxP
Flysky fs-i6s : goo.gl/FiQTMb
TARANIS QX7 : is.gd/49wbBV
Support my videos via Patreon : / yxbyjl
Dude, you just changed my life. I had a busted tx with the same style of switches, but 3 position and I just swapped them into my i6x and now have all 4 switches with 3 positions.
Cool, but what do you use it for? What's the application?
Saved my life, THANK YOU. Just bought my SN-L FC for my Ranger G2, and I thought this remote had 2 3 position switchs, I thought the remote was useless, because you need 2 3p switchs to control the modes on the FC, now I have hope again, THANKS!
thank you for this video, this is EXACTLY what I wanted for my Flysky FS-i6X. I want to use 'Switch B' for flaps (which will now be upgraded to 3 position) and 'Switch C' for the 3 modes of my gyro (which is already 3-position). I can't believe the transmitter is already wired for this and all it needs is an updated switch.
Do you know the technical specifications of the toggle switch you purchased? Instead of buying from Banggood, I can buy it from my country.
Whats the point of more 3 position switches? What would you use it for besides flaps?
I have this transmitter, Flysky i6X, can I replace the variable potentiometer by a 3 position switch?
üstad birde konuşsan tadından yenmeyecek.
What is the name of the conector that conect to swich and mother bord
Bonjour quel switch a position utiliser vous pour l interrupteur que vous avec installé ? Merci
Thank you... I was worried aha.
Thank you so much. What is the name of 3 switches?.
Name is "Toggle Switch"
Merhaba usta. Bı sorum olacak yine ben 😊😊 FS-ib6 kumandamin 10 uncu kanalına servo bağladım. Üzerinde bulunan potansiyometre yi degistirdim ve dondurmalı taktım. Fakat servoyu hareket ettirirken drek kapat aç görevi görüyor. Yavaş yavaş hareket ettirmem için nasıl modlamam lazım. Nereden yapabilirim.
Would this be the same on fs t6?
THE SWITCH DOESNT HAVE A POLARITY, RIGHT? BTW TY FOR THE VID
Switch have no polarity.
Couldn't this mod be done to all 3 of the 2 position switches? If so, that would open up more possibilities.
Yes you can mod all 2 position switches to 3 position.
@@Rota35 Thanks for your reply. What I noticed in the video is that this is the FS-I6X and mine is the standard FS-I6 which is different. Mine only has 2 wires going to each 2 position switch. Also it does not have the small PCB adapters on the bottom of each of the switches.
@@Rota35 Have a look at this video that I just stumbled on. This guy shows the differences between the two transmitters. ruclips.net/video/WBVmkXN8HC8/видео.html
@@danbemowski3014 Also available for fs-i6 but there is another method for the fs-i6. That method is a little complicated.
could you use the second 3 way switch for idle up? does the firmware on the i6x even support 3 postion idle?
ruclips.net/video/xt5IdeLdiug/видео.htmlsi=ZJHOsQ3Vr4Gd4Oxy
hi, on my fs-i6 i only have 2 wires in the switch .how i can do it?
Have a look here. ruclips.net/video/Vi5ipHJ7-EU/видео.html
Does anyone know which colour wire is vcc, sig, gnd?
On the small board with the switch there is info
Sir i have fs i6 transmitter not i6x so i don't get three wire attach to switch B please help how to update my fs i6 transmitter
ruclips.net/video/Vi5ipHJ7-EU/видео.html
üstad bu kumandayı multicopter de kullanmak için ne gibi ayarlar yapmak gerekiyor , kumanda üzerinde ve inav üzerinde . umarım anlatabilmişimdir.
Betaflight üzerinden yapilmasi gereken ayarlari anlattigim videoya bakabilirsin inav'da da yapacagin islem ayni. ruclips.net/video/-j5_gR1MDvU/видео.html
üstad anlatamamışım . kumandayı mod 1 de kullanmaktan bahsediyorum gaz ve roll joistik lerinin yerini değiştiriyoruz. yani gaz çubuğu ortada kalıyorya . örneğin dji ve hubsan dronların kumandaları gibi. umarım bu sefer anlatabildim.
Mod 1 kumandayi mod 2'ye cevirmenin iki yolu var fiziki olarak joystik lerin yerini degistirmek yada inav üzerinde Receiver/Channel map altinda AETR yazan yerdeki E ile T'yi A ile R harflerinin yerini degistirmek yeterli. bu videonu 07:50 dakikasinda anlatimi var ruclips.net/video/SPdQgOEtMT8/видео.html
Rota35 gaz çubuğu ortada kaldığı için arm olmuyor böyle bir sorun çıkıyor karşımıza
öyleyse kablolari degistirmeden jostiklerin yerini degistir.
Hello sir, can i add 3 position switch in my fs-i6 transmitter by this method....?
This method working only with fsi6x.