How is the rim of the 32 ACP (semi rimmed I know) not making problems in the magazine ? Would a rimless 'headspace on mouth case' 32 auto be a good idea ?
@@twistedyogert Since then I have made more research. The semi rimmed cartridges like 32ACP do have a protruding rim, but as most rimless cartridges, particularly 9x19mm (which is even tapered and intended for a quite long bullet, it really screams "early European pistol cartridge"). Their protruding rim is way less wide than with rimmed cartridges (revolver cartridges) so you can stack them and the risk of rimlock is very low, only problem is that they need a curved mag, but it's the same problem with 9x19mm and 7.62x25mm, and 7.62x25 mags are more curved than 32ACP ones. Semi rimmed designs have the advantage of both headspacing and extracting with the rim, when rimless cartridges headspace either on the mouth of shoulder, but always have to extract by the rim.
Buy a vz 61 smg parts kit. And install the sear and bolt. Might take a bit more tinkering but should be easy. Allegedly and I Allegedly have done this with tec 9s mac 11s and uzis because all you need is the bolt and barrel and lower. Depending upon your gun model and how it works you'd be surprised how easy it is
"Sir you cant drink the grease from the french fry tra-" 0:54
How is the rim of the 32 ACP (semi rimmed I know) not making problems in the magazine ?
Would a rimless 'headspace on mouth case' 32 auto be a good idea ?
The disclaimer did say that the animation is slightly different from real life. Perhaps that's one of the differences.
@@twistedyogert Since then I have made more research. The semi rimmed cartridges like 32ACP do have a protruding rim, but as most rimless cartridges, particularly 9x19mm (which is even tapered and intended for a quite long bullet, it really screams "early European pistol cartridge").
Their protruding rim is way less wide than with rimmed cartridges (revolver cartridges) so you can stack them and the risk of rimlock is very low, only problem is that they need a curved mag, but it's the same problem with 9x19mm and 7.62x25mm, and 7.62x25 mags are more curved than 32ACP ones.
Semi rimmed designs have the advantage of both headspacing and extracting with the rim, when rimless cartridges headspace either on the mouth of shoulder, but always have to extract by the rim.
開槍速度太快……需要極慢動作
how to put full auto in semi auto vz61?
Buy a vz 61 smg parts kit. And install the sear and bolt. Might take a bit more tinkering but should be easy. Allegedly and I Allegedly have done this with tec 9s mac 11s and uzis because all you need is the bolt and barrel and lower. Depending upon your gun model and how it works you'd be surprised how easy it is
Allegedly
@@kritizismmusics9737 Is that legal?
What app/ program is this?
Free game store.steampowered.com/app/262410/World_of_Guns_Gun_Disassembly/
ขอปืนminiuziหน่อยครับ
ผมยังไม่มีโมเดลเลยครับ จะพยายาม ขอบคุณที่ติดตามครับ