Vision Pro Light Seals EXPLAINED
HTML-код
- Опубликовано: 11 июн 2024
- What do the Apple Vision Pro light seal sizing numbers mean? Find out here and go get your perfect size!
As always, thanks for watching and if you enjoyed this content please like and subscribe!
----------------------------------------------------------------------------------------------------
Products:
➡️ Compact Vision Pro Case (Amazon) - amzn.to/3T1nYgc
➡️ Nreal Air (Amazon) - amzn.to/3XgdiKs
--------------------------------------------------------------------------------------------------
Equipment:
➡️ Elgato Wave:3 Microphone and Accessories: amzn.to/3PyGeKv
➡️ Keychron K3 Keyboard: amzn.to/3QXGSSg
➡️ Logitech Pebble Mouse: amzn.to/3wlM20X
----------------------------------------------------------------------------------------------------
Follow me on social media:
➡️ TikTok: / coffee_n_cards
➡️ Instagram: / coffee_n_ca. .
➡️ LinkTree: linktr.ee/coffee_n_cards
----------------------------------------------------------------------------------------------------
Support:
➡️ BuyMeACoffee: www.buymeacoffee.com/coffeencards
----------------------------------------------------------------------------------------------------
#visionpro #applevisionpro #apple #augmentedreality #xr #vr
---------------------------------------------------------------------------------------------------- 
Наука
Highly underrated video ! This was key for me and I want to thank you for this video. Light seal is so important and with Apple doing such a horrible job of explaining and also getting some really bad people to give demos, many people end up getting the wrong size and will complain about FOV, comfort etc. Sad affair, Hope more people watch this and get the best one for their head size !
Mine : 14W
FH : 3.3cm
CH : 3cm
MID : 5.2cm
Great video.
I’ve watched far too many VP vids. This is the first I’ve seen which explains the light seal numbers so clearly. Thanks 😄
Great video, very informative!
Very very helpful - thank you 🙏🏼
This is spot on after doing similar testing.
I noticed a significant reduction in pressure around my face with the W+.
Would love to see a follow up or reddit post regarding the W vs N pads. Thx!
I am also curious about W vs N sizing. Is it just nose width? Or entire mask width?
N and W is Entire mask width. The normal and + cushion just add more depth to it. Makes sense if you feel pressure on your nose for example.
I've noticed the angle induced by this seal also affects the location of the lens reflections from the lens itself. My reflections are too much in the way of the video and I'm looking to replace the seal with a different size to remedy the reflections... not the light leaks, if that makes sense. Funny how nobody is talking about this aspect of the seal. They are two totally different subject matters.
That's interesting. So far, I've just accepted the glare. Which angles have you found to be most beneficial for glare positioning?
Like! I also have 21W, it was from box. I didn’t know which size I get as I’m outside of US. But seems I lucky :)
FOV could be better. I really like FOV without light seal cushion (which is W for me), but Apple says that my eyes are too close to lenses. And it’s less comfortable to wear without it. I think that it’s an area for further improvements
I’ve actually tested every one that Apple makes, had the AVP since it dropped…
21W all the way…
Depending upon your facial bone structure… so when I say this is literally flush on my face with the 21W, I have issues with Optic ID at times, and I purposely have to kind of unlock & shimmy AVP down my nose to unlock it.
21W fits like a glove… and I am constantly getting you are too close to the screen.
(I literally blink and or tear up at times through different weather changes i.e., going from indoors to outdoors whether it’s hot or cold or air-conditioned and let’s say my contact, or my eye gets irritated, and my tears from my eye will hit the screen if I don’t pull the AVP off as soon as a small tear occurs) … I guess I freaked out because I don’t wanna mess the screens up.
But the difference between no facial shield and 21W for me is nothing big.
My FOV is pretty excellent… I’ve driven (not to post & not for clout) with family, I can wear it all the time… the difference going with any face
I was scanned as 33W which was completely wrong. Went to 21W which improved POV a lot. But it was still painful on my forehead and if I didn’t use the W+ Cushion it also hurts on my nose. Then I finally decided to go 11W which is perfectly fine in comfort, lens glare and FOV.
I don't have money to buy at the moment, but I started doing neck exercises. 😀
The 11M press down on my cheeks close to my nose, while a 36W press down on my eyes close to my temple, which cause Optic ID to not work at all. I cannot fiind any light seal that can rest somewhat on my nose, distributing the weight. All seals I tried just press down on my forehead and cheeks. Hoping for some 3rd party seals soon. Ones with air pumps would be great.
Fine a good fit and then rescan eyes after?
A friend had a 30 minute demo at the Apple Store with a 23W. There was still a feeling of it being too loose with light leak at the bottom and pressure on the bridge of the nose. They want to go back for a rescan.
There’s light leak in all of them. I tried all of that at Apple store
@@ManuelHernandez-tm1mq try sliding headband jiggle the knob at the same time find that sweet even pressure spot on your front and back
Are they likely to offer after market? I actually don’t mind using the Apple Vision Pro without a light shield it’s less clunky in the face and the light that’s let in isn’t a deal breaker but I’d need some padding around the nose forehead. I can see a lot of better after markets for this.
I suspect there will be a lot of aftermarket solutions after some time. There is much pain and a great need for comfort and fit solutions.
Which size woud be more appropriate for reducing the light around the nasal area? Thanks!
Maybe try N vs W sizes. I've only tried W sizes, so don't have a good reference point for N sizes
Make sure the cloth piece is resting onto your and around nose, (from top onto bottom) it’s ok for slight leakage it goes away/gets used to it as long as it’s not bunched up, nice and flat resting
So mine, 21W, is the thinnest I can get, as in closest to displays? :):):)
Yup, that's about as good as it gets in terms of fov while using a light seal.
I’ve actually tested every one that Apple makes, had the AVP since it dropped…
21W all the way…
Depending upon your facial bone structure… so when I say this is literally flush on my face with the 21W, I have issues with Optic ID at times, and I purposely have to kind of unlock & shimmy AVP down my nose to unlock it.
21W fits like a glove… and I am constantly getting you are too close to the screen.
(I literally blink and or tear up at times through different weather changes i.e., going from indoors to outdoors whether it’s hot or cold or air-conditioned and let’s say my contact, or my eye gets irritated, and my tears from my eye will hit the screen if I don’t pull the AVP off as soon as a small tear occurs) … I guess I freaked out because I don’t wanna mess the screens up.
But the difference between no facial shield and 21W for me is nothing big.
My FOV is pretty excellent… I’ve driven (not to post & not for clout) with family, I can wear it all the time… the difference going with any face
@@nyalexnj heck yeah! Same broh my family is use to it now and it’s actually nice to have ppl notice and inquire about it! I’ve juggled and driven too haha same thing as you for science and research purposes but totally feasible ! Use it pretty much all day everyday
What is that you’ve added that goes over the top of the head?
It's a Velcro head band I repurposed from a Quest headset attachment. I've since switched to using a second solo knit band (small) attached with Velcro cable ties. Comfort was vastly improved for me and the bands are super convenient to adjust.
@@coffee_n_cardswith a 3D printed clip?
@@alienlovearts I used Velcro cable ties. I just posted a video on it if you want to check it out. I do have a set of 3d printed attachments on order, and will probably post a quick follow up once I get those in.
what if you get 33 and use inserts? 🤔
Inserts may affect the needed depth. My recommendation is to get your eyes as close as possible without eyelashes touching the lenses or getting proximity warnings.
I want to put YouZee Clip do I need more than 21 W?
You'll need to play with the depth number 21,22,23,24, etc when dealing with inserts.
@@coffee_n_cards Can we change the light seal out of the 14 days?
@@Sla1708_Ytb Might be a case-by-case basis beyond the 14 days. I would try in-person in store and calling-in if that doesn't work out.