how to uncouple rail cars in HO scale
HTML-код
- Опубликовано: 29 янв 2021
- how to uncouple rail cars in HO scale
a cheap and easy way to uncouple rail cars on a HO scale model train layout.
no wiring, no push buttons. just cut away a few ties and place the magnet into the center of the track.
Thanks for actually demonstrating the installation and correct use of the uncoupling magnets Sparky. They have been around forever, but I have generally seen them abused more than used. Again, thanks for the contribution to the community knowledge base. Art...
Nice demonstration Sparky. Those do work really well. Thank you for sharing.
That was a super demo Sparky, I am eager to try it now! Very helpful, straightforward and easy to see!
I plan on adding a lot of these. Great demo! - Jason
Super easy, thanks Sparky , Kayde couplers are the best
Great demo of how this works.
Thanks for posting!
great demo David..thx for sharing.. vinny
Those are a cool way of uncoupling Sparky
I use code 83. I found that simply gluing them on top of the ties works well too. No need to cut the ties.
Thank you sparky showing how to use those i thought about getting some
Bought an old used bunch off eBay, nice demo. And I'm finally grasping code 100 vs code 83 vs ???. Thanks Sparky. - Alan
Great how to! Good job!
Hi Sparky,
Not just Ho I have some of these also with the uncoupling ramp in the terminal station and they do work very well far better I think than the Hornby ramps for uncoupling the standard coupling we use here so this was interesting to me and quite a few over here use them. Keep well and safe.
Cheers Robert.
Nice short demo, I am looking at getting this sort of thing for the new On30 layout, Cheap and simple makes me happy :)
Great video Sparky. We have played around with one of these and will be buying more. All of our locos and trains are converted to Kadee couplers so this should work great.
Good demonstration of the coupler action but if you use code 100 magnets on code 100 track you do not have to cut out the ties. Trip pins need to be adjusted to fit just over the plate on the front of the coupler height gauge and there is a plunger pin on the back of the gauge for setting the magnets at the correct height
Thanks sparky good demo
Nice 👍👍😎
Good uncoupling
Awesome video!!!
I use the code 83 magnets on my code 100 track. You dont have to cut the ties out. They fit pretty good. And if you decide to move them you have a hole in the track to fill
Those are very nice. I like how you don't have to touch or mess with the couplers
good vid keep up the good work
I'm liking the how to videos. Thanks Sparky!
Great demo Sparky. I put one of these too close to turnout so it didn’t work. 🤬. Other two on straighter track work ok.
nice video sparky i enjoy your videos they are very imforative for me being a newbie
I am planning o. Giving these a go. Even tho I’ve cut off a lot of my trip pins. I wonder if the 83 could be used on code 100
I've installed the under track magnets. Not as good right before or after a curve. Best on straights. I am going to try those above track versions next. I am betting they work better.
Great review sparky.
Nice video Sparky!
I thought my first divorce was uncoupling but now I know the real meaning, Thank you
I was just thinking about this . Maybe the refrigerator magnet sheets available from most craft store could be cut ans glued in between the rails. Hmmmmm
Nice video!
Half the cost if you cut them in half! You have to be a bit more precise in the uncoupling process.
Since when do you go cheap. lol
sparky took you this long to figure out to couple the cars up yea who given you the madness idea you can hand uncouple your rail cars? laugh my sore gut off lol