Lot many of you have asked about the Multiplexer i had designed - It is difficult to handle so many request on phone and on email Please see the document here docs.google.com/document/d/1CJEmPbuPaYDlN3YAbOsUXLGpV6Jl8guA_sqov8NvvVE/edit?usp=sharing
You get anchor fastener type bolts which can self lock inside the handle bar. you can use this bolt and change the weight and then fix the knuckle guards
Sir can you please tell how did you fit this old handle bar end weight on this new braced braced handle bar kit from RE, mere Himalayan mae sane handle bar hai aur usme purane wale handle bar ka bar end weight lagana chah raha hai jo lag nahi raha hai . Can you please tell how to fit that. You response is appreciated.
there are anchor fastner bolts(I am not sure what it is called though) for handle bars. Easily available on motorbike spare shops. It has a bolt which goes inside the handlebar ends and expands insides and locks and the other side it has a nut in which you can tight the weight.
Philips xtreme vision is one of the best halogen available in the market without modification. Other than that if you like white light then 55W LED is good - speak to Debraj - theraperchika2@gmail.com he is one of the best light expert in india.
I have similar mobile mount, mobile doesn;t stay on it for long time. look for kenso switch panel for switches. also one helpful mod will be battery voltage meter (V) & capacity meter(100%), Tyre Pressure & temperature monitor, since himalayan still have tubed tyre. Another useful is Air pump
Not sure about back pillion rest. Will think something and let you know. There is a guy Hemant Darbar in Mumbai who does some fabrication and customisation work you can check with him. His number must be there in the description.
Hi. You can try Nighteye H4 led as your headlight. No wire tampering is needed. Just plug and play. Would you mind tell me where did you bought your turn indicators?(KTM showroom) or online (Please share me the link)
Hello, I don't make it for others and sell. This is DIY, you can make for your self, please see the description of the video all the details about the multiplexor is there. thanks for watching this video
You have done fantastic and sensible mods.... I would appreciate if you could give me more details or buying option for the multiplexer which is very useful gadget and a very proactive measure.
Hi, I am unable to find handle cross bar online the one you have on your bike. Could you please let me know where to get this from. And also whats its length. Thanks in advance.
Amrit Gupta Hi this handle cross bar come with the handle. This handlebar is part of the Himalayan explorer kit - check with RE you can get it. It took about 3 months to get it from RE
If you have raised handle bar make sure you reroute the clutch cable. There are problems faced by Himalayan riders who have raised handle bar but didn't reroute clutch cable. If you don't loosen the clutch cable then when you turn handle to right the clutch cable tightens, over the time it causes problem in clutch plate cause you are unknowingly pressing clutch every time you take right turn.
Loose Gravel thanks :) what a nice friend :) i actually got some acerbis rally pro but they don't fit. That's why i was asking 😁 will look for something else now
Gourav Sharma yes you can with some modification in the skull. However the entire look of classic will change as this is much longer suspension. Speak to Anthony if you are in Mumbai- he is Bullet Guru his number is there in the description. My personal suggestion don’t do it.
@@LooseGravel thnx for the quick response.. I have already installed fork gaiters of classic 350 which is very short for classic 350 so planning to install the long one and i think fork gaiters for himalayan will be good for classic..
My bad you mean the gaiters - off course yes. No issues will be there with that. I thought you wanted to install the fork itself. Only thing is you need to remove the metal fork dust cover.
it is little wider and ergonomic is little different, has vibration rod, even the weights are rubberised from inside, colour is different and scale is given at the center for perfect setting. Please check it at the showroom before you make any decision to buy. Overall in riding it gives a better posture is what i felt.
@@wandersane6661 - According to me it is personal choice. I choose Himalayan as i wanted adventure tourer bike. All royal enfield customers are emotionally biased so they suggest royal enfield.
Hi You Rock man,genuine and originality in your vlog.Wanted to ask you about the headlight,after switching on the ignition is the headlight always on or there is some switch to switch off the lights in the day time.
Sir which parts are needed for bettery relay ? How did you do it ? Will you please help me ? How did you extend cable from your bettery ?? Really need to do this for my bike....
Ben Philip two small things to take care in BS4 - you need to interchange the pins inside the indicator socket - this is because all LED lights has the defined positive terminal. Second you need to file/drill the indicator mount so that it fits well. Another option is speak to Novatronics guy he has some LED bulb for Himalayan. Hope this helps. Thanks for watching the video
I think you can do it but both the bike are for different purpose. you will probably loose the look and comfort of the bike is my personal opinion though.
I honestly was expecting to be disappointed thinking this is one of the usual accessories videos with weird modifications. But this is really impressive.
Dear Sujeet, Very good work! I liked your disposition, practical, humble and matter of fact. Your mods on The Himalayan are very genuine too. Good job! Of course, subscribing your channel too! Happy riding!!
Freedom Riders Of Gujarat Jatin Panchal 9996 that is just a wire multiplexer - it is made using a pvc pipe. The stickers are made and stuck in to the pipe. Let me Know anything specific you want to know
No Santa, I dont sell multiplexer. I made it for my bike and thought may be useful for those who want to fix may auxiliary lights, horns etc. It is easy you can see the description to know more about it.
@@santudas9291 other wise also - it is just a relay fitting and taken the connection from the back light and the hot wire is multiplexed for many more connection in the front of the bike.
I personally don't think there is any issue in installing a switch. However the connection has to be proper like use high quality connectors, good auto grade wires, use of high amp switch, use of proper insulators and heat shrink tube etc. Most of the outside mechanics and RE service guys don't do such quality work though.
Hello Loose Gravel , I have recently bought a RE Himalayan. Shall I buy it from RE officials or HDT are goods ? If I take my bike to HDT, Can I make the customization exactly as per your bike ? :-) Awaiting your reply.
Vey nice vlog want to buy Himalayan accessories in Pune can u help with that And suggest where to buy saddle stay rake and saddle bag in Pune with low rate
Most of it is which I had used is custom made. I am not sure if you can get those is Pune. You can search HDT custom(Mumbai) he has some of the good items for Himalayan
Very nice video with proper explanation and no unnecessary music added. I want to know about the knuckle guards. Are same kind of available online? Secondly, I have bullet Electra & I have installed Himalayan windshield, can I mount the GPS holder as well?
Thanks, I am glad you liked it. Knuckle guards were from Acerbis- you can check AliExpress for those. GPS mouth can be fitted but you need to fabricate the mount for GPS holder
That thing is Aluminium and Provided by Royal Enfield (OEM parts). The same part which comes with the bike. I hope you are taking about the Handle raiser?
Nice.You can also get the silencer cover plates and master cylinder cover powder coated from Hemant.he's done it for me and it looks class+protects.To enhance the performance and increase engine life put Motul 300V.4T-15W50 and an NGK iridium plug.bike will become soundless and smooth.The GPS mount adds weight and in the event of a crash it will break the meter console and the visor.Check with Hemant also.i too have been biking for 39 years and technically educated and no bragging but mine is one of the best customized Himalayan.😊
Jeet Kandhari thanks buddy my take is below 1. Silencer covers are SS so it will not rust. 2. Yes agree on rear break cylinder cover will try doing it. 3. Regarding the gps mount - I think you are right but anyways if there is nothing then also it will damage the instrument cluster. Infact in small impact it may save the the instrument cluster. Regarding the weight it is about little less than 500gm. I think with pannier and stay with back top box this is negligible. 4. I will change the spark plug to NGK. If possible share the model number Thank you for watching. Truly respect you and your thoughts
Jeet Kandhari I residing in Banglore, but from Nasik.. I too have RE Himalayan BS4 ABS. Can you suggest some contact or custom shops in Bangalore. I do not plan to custom the bike but some basic Ride ready mods which are essential such as Aux lights, saddled straight and so on, but keeping the bike as basic as possible. Hence plz suggestions if you know of any contact which are reliable.
Sanjiv Pradhan I got knuckle guard from my friend it was used. You can check ACERBIS knuckle guards online. You can also check it from Hemant darbar- his number is mentioned in description. ACERBIS are costly some 20k but the copies are available in 2-4K. Check in Ali express or wish website
sudarshan shetty there is no technical difference both are same the only difference is the colour. Sleet has the stickers while others dot have. Sleet is about 4K costly then others Earlier when sleet was launched the first 500 vehicle was given an explorer kit in lessor price. Now sleet is available for everyone and explorer kit is also available in about 32k. The kit contains the handlebar, leg gaurd, panniers and panniers stay.
Ok, so have you installed any fuse between battery positive and the output? If yes how much ampere? And specifications for relay. I guess you have a common relay for USB and aux lights, please suggest
So this is what i did 1. Took uPVC pipe and cut is small piece with both side enclosure 2. Tool the 5 pin relay with fuse (you can add fuse if you dont get relay with fuse) 3. point 86 relay goes to the rear parking light socket - dont cut the wires it can go int he socket withour cutting the wire (this is because you want to get the current only when the ignition switch is on) 4. Take 4 Sq mm low resistance wire 1 mt, 1.5 Sq Mt wire about 2 mt. 5. 87 goes to multiplexer - (4 Sqmm- this is nothing but a copper plate with four holes and nut welded (8no)) 6. 85 goes to body earth 7. 30 goes to battery positive - this should be 4 Sqmm wire 8. you can take out wires from multiplexer and use it for horn / fog lamp/usb charger ETC you can share your email to me on sujeetacharya@yahoo.com - i can share the wiring diagram
As hiamlayan is worth for off-roading how is it for daily city commute ? Company is claiming 35kmpl in city condition and 40kmpl in highway condition ! So what’s your experience with Fuel efficiency city and highway ?
Hi Shubham, It is definitely not more than 30kmpl in city but in highway it is very near to 30Kmpl. Lot of friend are using this for even daily commute but actual fun is in Long rides and off roading.
Lot many of you have asked about the Multiplexer i had designed - It is difficult to handle so many request on phone and on email
Please see the document here
docs.google.com/document/d/1CJEmPbuPaYDlN3YAbOsUXLGpV6Jl8guA_sqov8NvvVE/edit?usp=sharing
Very good modification . Everything is usable. Koi faltu chij nhi meh bhi yhi sb lagwane wala hu. Thanks broo
nice calm and the best thing is no unnecessary music added.
thank you
Do we need to raise the handlebar for acerbis knuckle guards installation ?
Yes. Else it touches the windshield
Hello. How did you mount the knuckle guard on new RE handlebar
There is a anchor fastner type bolt 🔩 which you can get it in the local bike accessories shop. You can use that to fix the knuckle guard
sir pls share where you get your powder coating done in mumbai
I am not sure in Mumbai but in Navi Mumbai there is a workshop in Shirvane Nerul.
You have made the changes very aptly
how did u fix the kunckle guard on braced handlebar.?
You get anchor fastener type bolts which can self lock inside the handle bar. you can use this bolt and change the weight and then fix the knuckle guards
How did you install bar weights on this handle andar me hollow rehthi naa
There is anchor faster bolt which holds it by spreading inside
Sir can you please tell how did you fit this old handle bar end weight on this new braced braced handle bar kit from RE, mere Himalayan mae sane handle bar hai aur usme purane wale handle bar ka bar end weight lagana chah raha hai jo lag nahi raha hai . Can you please tell how to fit that. You response is appreciated.
there are anchor fastner bolts(I am not sure what it is called though) for handle bars. Easily available on motorbike spare shops. It has a bolt which goes inside the handlebar ends and expands insides and locks and the other side it has a nut in which you can tight the weight.
Loose Gravel thanks sir ji i will try to search this bolt here in delhi local automobile shop. Really appreciated your help.
All the useful mods nothing showoff
Nice work boss 👍
Glad you like it
Is that philips xtreme vision better than the stock headlight?
Any suggestion for better Bulbs for better vision at night? Direct fit preffered.
Philips xtreme vision is one of the best halogen available in the market without modification. Other than that if you like white light then 55W LED is good - speak to Debraj - theraperchika2@gmail.com he is one of the best light expert in india.
@@LooseGravel okay thanks. Srems like, I'll have to convert my BS6 AHO to BS3 setup. Else it'll affect the bulbs.
Wah wah sir maja Aa gaya nicely explained. full of passion
Hello sir, where did you get the handlebar riser
It is available le in royal Enfield service centers
Sir need to know wire multiplexer which you extended from your bettery..... from where I can buy that part and install ??
Please check the description. you will get the details, however this is DIY you will have to make it on your own.
you are such a humble person
One of the best and practical mod seen on you tube
Best Himalayan Customisation I have ever seen, Ur Bike looks much much beautified, Thanks that was really nice of U
Thanks, for the appreciation! Cheers
I have similar mobile mount, mobile doesn;t stay on it for long time. look for kenso switch panel for switches. also one helpful mod will be battery voltage meter (V) & capacity meter(100%), Tyre Pressure & temperature monitor, since himalayan still have tubed tyre. Another useful is Air pump
Thanks Amit for addon's it will help the viewers
Where did uh dò all the modifications? I mean in which place of mumbai?
My bike is maintained by Anthony bhai in Mumbai. However I myself was fully involved in many of them.
Nice video.
Any options available for pillion back rest, and some modifications for pillion getting on and off ease.
Not sure about back pillion rest. Will think something and let you know. There is a guy Hemant Darbar in Mumbai who does some fabrication and customisation work you can check with him. His number must be there in the description.
@@LooseGravel Thanks for replying.
HDT customs, have already contacted him. Will meet him soon...!!!!👍
बहुत ही बढ़िया भाई
देख कर मज़ा आ गया
Great work .. I like the originality in your vloging style and the fact that you don't end up copying other RUclips's 😎🙌
Sir aapne himalayan ko bahut khubsurat se modification kiya. Nice👌
Bai perfect modification i like that very much if i get himalayan I'm going to do this same things thanks for the vdo
Hi. You can try Nighteye H4 led as your headlight. No wire tampering is needed. Just plug and play. Would you mind tell me where did you bought your turn indicators?(KTM showroom) or online (Please share me the link)
Is it possible fit the himalayan handle bar to classic 350?
Technically you can. I don't think it will add any value to comfort in riding though.
@@LooseGravel thank you
I was looking to change it , now i will check again
Hello sir , i need the info about the multiplexer and relay. Where to buy the product... I have a himalayan bike.
Please check the description. you will get the details, however this is DIY you will have to make it on your own.
Good blog very helpful. bought bs4 abs himalayan 2 days back. Will go on a short 300kms ride this weekend
Vijayendra Raut congratulations for your new bike. Wish you many more happy miles.
5:55 that multiplexer you told about. I need one too for my Himalayan, how can I get one of those?
Hello, I don't make it for others and sell. This is DIY, you can make for your self, please see the description of the video all the details about the multiplexor is there. thanks for watching this video
You have done fantastic and sensible mods.... I would appreciate if you could give me more details or buying option for the multiplexer which is very useful gadget and a very proactive measure.
Multiplexer was home made. You can make yourself. Details are there in description.
Sir apne jo jo modification kiya he wo sub krne ke liye kitna coast laga muze bhi krna he mera bhi himalayan granite he
Bikerider Vaibhav sure - few of them numbers and link in provided in the description- rest I will separately add
Hi, I am unable to find handle cross bar online the one you have on your bike. Could you please let me know where to get this from. And also whats its length. Thanks in advance.
Amrit Gupta Hi this handle cross bar come with the handle. This handlebar is part of the Himalayan explorer kit - check with RE you can get it. It took about 3 months to get it from RE
If you have raised handle bar make sure you reroute the clutch cable. There are problems faced by Himalayan riders who have raised handle bar but didn't reroute clutch cable. If you don't loosen the clutch cable then when you turn handle to right the clutch cable tightens, over the time it causes problem in clutch plate cause you are unknowingly pressing clutch every time you take right turn.
If you see I have not raised the handle much. It is about 2.5 inches and with this height increase there is tension on the clutch cable
How i can install those led indicators please tell me i am from Haryana?
I saw your couple of video today. Very nicely made .
Thanks Shiv. Much appreciated your kind words.
Does knuckle guard hits the wind shield while handle lock.
Amrit Gupta no because I have raised the handle bar
Very good idea about raising the handle bar. I am going to try that soon. Thanks!
Thank you for landing here. I am glad you liked the idea and thanks for subscribing the channel.
Hello :) Nice video. I may ask what knukkle guards do you have? Thanks
It was a gift from my friend. It was copy of acerbis brand I guess
Loose Gravel thanks :) what a nice friend :) i actually got some acerbis rally pro but they don't fit. That's why i was asking 😁 will look for something else now
Hello Ji , can you tell me where you got the bolts for handlebars after installing the raisers?
you can get it in local hardware shops. i got it from new bombay hardware in turbhe - navi mumbai
Is ladies side for rest available for Himalayan ?
I assume you mean saari guard. yes it is available
Hey bro just need to know can we install the same fork gaiters on classic 350?
Gourav Sharma yes you can with some modification in the skull. However the entire look of classic will change as this is much longer suspension. Speak to Anthony if you are in Mumbai- he is Bullet Guru his number is there in the description.
My personal suggestion don’t do it.
@@LooseGravel thnx for the quick response..
I have already installed fork gaiters of classic 350 which is very short for classic 350 so planning to install the long one and i think fork gaiters for himalayan will be good for classic..
My bad you mean the gaiters - off course yes. No issues will be there with that. I thought you wanted to install the fork itself. Only thing is you need to remove the metal fork dust cover.
The yellow coloured gear peddle cover was something very new. A very small accessory but, it saves ur shoes from getting damaged.👍
Sri Harsha yes forgot to mention that
Short but sweet.
Keep it up 👍
Handle bar me kya difference hai...is it wider than the stock handlebar?
it is little wider and ergonomic is little different, has vibration rod, even the weights are rubberised from inside, colour is different and scale is given at the center for perfect setting. Please check it at the showroom before you make any decision to buy. Overall in riding it gives a better posture is what i felt.
@@LooseGravel thank u sir ji...
@@LooseGravel im bit confused between dominar2019 and the himalayan..will u help me to choose one
@@wandersane6661 - According to me it is personal choice. I choose Himalayan as i wanted adventure tourer bike. All royal enfield customers are emotionally biased so they suggest royal enfield.
Lovely sir smart and simple modification but very effective. Thank you
Bhai such a nice vlog so clean and tidy mods on bike ND u speak very humbly 🙏 jai hind
Bettery relay ka work kaha pe hoga in Mumbai??
Check with Anthony in Mumbai. I did it my own
Where you buy vibration rod
It comes with Royal Enfield adventure kit. You also buy intercepter accessories
@@LooseGravel I don't find in accessories just gave the link
you need to go to the authorised showroom/ service center to get it. Online it is not available as these are OEM products.
After raising the handle bar. Is there. Any vibration
BhaskarJyoti Dutta no vibration
Hi You Rock man,genuine and originality in your vlog.Wanted to ask you about the headlight,after switching on the ignition is the headlight always on or there is some switch to switch off the lights in the day time.
I did change the Switched to BS3 because the battery is really small in size about 7ah. So while switching on my lights are off unless I switched on.
Shaaamdaaar kaam. Hai bhai
Ur boyh tyres are pirelli mt60 right? On road and off road performance
And also what is the life of tyres
Saikiran Shetty I run on stock ceat tyre. Not Pirelli.
@@LooseGravel oh ok
Sir which parts are needed for bettery relay ? How did you do it ? Will you please help me ? How did you extend cable from your bettery ?? Really need to do this for my bike....
Check the description the details are there.
Can you pls share the fixing method of the KTM indicators ... I got one and tried hard to fix but didn’t work
Ben Philip two small things to take care in BS4 - you need to interchange the pins inside the indicator socket - this is because all LED lights has the defined positive terminal.
Second you need to file/drill the indicator mount so that it fits well.
Another option is speak to Novatronics guy he has some LED bulb for Himalayan. Hope this helps.
Thanks for watching the video
Loose Gravel thanks a ton for the detailed reply thank you
Very tasteful mods and neatly done. You look very calm by nature too brother.🙂👍👍👌
Nice work done. Little help. Can we change the handle in to clip on handle bar like cafe racer
I think you can do it but both the bike are for different purpose. you will probably loose the look and comfort of the bike is my personal opinion though.
Will change completely in to cafe racer . But I like clip on handle on himalaya
Nice and informative good job
Tank protection pad means?
tank protector pads are the rubberised material which you can stick on the side wall and top of the the tank.
Awesome customization. Job well done neat work. It really adds up to the bike a lot.
From Where u purchased that handle bar
Aman Singh this is adventure kit from Royal Enfield company owned
@@LooseGravel So is the handle set also new or just the impact/stabilization bar in center?
V nicely done. Neatly too. Loved to see the small but detailed video.
Thank you for nice words.
I m going to buy Himalayan...where is the auto shop to do same modification as you did
Most of them are self made. You really need to find it. You can ask Anthony Bhai in Mumbai
Could you tell me where you bought the turn indicators?
Sasank Appalla this KTM indicators - about 1200 pair. You can get it from KTM service shops
Hi, just wanted to know that ur still using the knuckle guards with ur risers if yes den is it fully successful or facing any issues?
Yes, Still using the same. No Issues so far
I honestly was expecting to be disappointed thinking this is one of the usual accessories videos with weird modifications. But this is really impressive.
Dear Sujeet, Very good work! I liked your disposition, practical, humble and matter of fact. Your mods on The Himalayan are very genuine too. Good job! Of course, subscribing your channel too! Happy riding!!
Thank you for your kind words. It means a lot.
From where you got this handlebar and raiser??
the handlebar is adventure kit from royal enfield
Really useful information 4r upgradation on bike
Nice work. Clever modification.
Jo aapne Royal Enfield company vala Electricals parts lagaya he uska...?
Freedom Riders Of Gujarat Jatin Panchal 9996 that is just a wire multiplexer - it is made using a pvc pipe. The stickers are made and stuck in to the pipe.
Let me Know anything specific you want to know
Hello sir ....
Kiya app Multiplexer sell karte to ?
Appka Multiplexer bohot accha laga ..
Please reply.
Thank you
No Santa, I dont sell multiplexer. I made it for my bike and thought may be useful for those who want to fix may auxiliary lights, horns etc. It is easy you can see the description to know more about it.
Yes but diagram pic not clear... Little bit hezi
Can you sent me tha clear pic if you don't mind..... santukumardas.das543@gmail.com my id
@@santudas9291 just check the word file in the google drive it has the fully clear picture- check on laptop
@@santudas9291 other wise also - it is just a relay fitting and taken the connection from the back light and the hot wire is multiplexed for many more connection in the front of the bike.
Nice bike. thanks. I want the handle raiser too. Any new cable needed? Or are stock cable long enough? I am especially worried about brake line.
Anirban Bhattacharjee the one I did does not require any cable change
Simple and sweet .liked and subscribed.
Ajay k thank you so much for the kind words.
Yeh indicator lights kaun sa use kar rahe ho aap aur pricing kitna ka hain
KTM LED indicator
Hey buddy.. it’s nice customisation .. job well done
Superb mods brother.. Keep it up... Go high and high
Can you please make a separate detailed video on how to make multiplexer?
check the description - there is a document that may help you.
Can you send me link for the handlebar risers
you can buy it from Royal Enfield service center itself
Is it safe to install switches for headlight on my himalayan? Service centre guy says its harmful, but is it safe?
I personally don't think there is any issue in installing a switch. However the connection has to be proper like use high quality connectors, good auto grade wires, use of high amp switch, use of proper insulators and heat shrink tube etc. Most of the outside mechanics and RE service guys don't do such quality work though.
Sir helmet buying pe video banao..... how to choose right helmet for long drive
Sure will make that too.
Hello Loose Gravel ,
I have recently bought a RE Himalayan.
Shall I buy it from RE officials or HDT are goods ?
If I take my bike to HDT, Can I make the customization exactly as per your bike ? :-)
Awaiting your reply.
Hari B most of it I did it my own. In case you yourself can’t do you need to find the right guy
Vey nice vlog want to buy Himalayan accessories in Pune can u help with that
And suggest where to buy saddle stay rake and saddle bag in Pune with low rate
Most of it is which I had used is custom made. I am not sure if you can get those is Pune. You can search HDT custom(Mumbai) he has some of the good items for Himalayan
Sir handel bar rod kha se lia?
Ashu Gupta it comes with the adventure kit
@@LooseGravelcan we have it individual ? If then please give the link
Ashu Gupta you can only get it with handlebar at RE spares shop. But there are many after market bars are available. Check on AliExpress
Very nice video with proper explanation and no unnecessary music added.
I want to know about the knuckle guards. Are same kind of available online?
Secondly, I have bullet Electra & I have installed Himalayan windshield, can I mount the GPS holder as well?
Thanks, I am glad you liked it. Knuckle guards were from Acerbis- you can check AliExpress for those.
GPS mouth can be fitted but you need to fabricate the mount for GPS holder
From where did you purchase the saddle stay ? please can you share the contact details for the same.
Saddle stay are the part of rotal Enfield adventure kit.
Nice work
Keep up the good work bro. Great video. Damn informative.
Thanks k you for your kind words
What's the weight of bike now?
carb weight is about 182kg with panniers it must be about 200kg. with top box it would be about 210kg.
But that ulta thing is not aluminium or steel , is that safe ? Or ram bharose ?
That thing is Aluminium and Provided by Royal Enfield (OEM parts). The same part which comes with the bike. I hope you are taking about the Handle raiser?
@@LooseGravel I think that is cast iron?
@@arnoldnitesh May be - not sure. At the first look it looked like a aluminium
Beautifully done sir... 👌
Nice.You can also get the silencer cover plates and master cylinder cover powder coated from Hemant.he's done it for me and it looks class+protects.To enhance the performance and increase engine life put Motul 300V.4T-15W50 and an NGK iridium plug.bike will become soundless and smooth.The GPS mount adds weight and in the event of a crash it will break the meter console and the visor.Check with Hemant also.i too have been biking for 39 years and technically educated and no bragging but mine is one of the best customized Himalayan.😊
Jeet Kandhari thanks buddy my take is below
1. Silencer covers are SS so it will not rust.
2. Yes agree on rear break cylinder cover will try doing it.
3. Regarding the gps mount - I think you are right but anyways if there is nothing then also it will damage the instrument cluster. Infact in small impact it may save the the instrument cluster. Regarding the weight it is about little less than 500gm. I think with pannier and stay with back top box this is negligible.
4. I will change the spark plug to NGK. If possible share the model number
Thank you for watching. Truly respect you and your thoughts
Jeet Kandhari I residing in Banglore, but from Nasik.. I too have RE Himalayan BS4 ABS. Can you suggest some contact or custom shops in Bangalore. I do not plan to custom the bike but some basic Ride ready mods which are essential such as Aux lights, saddled straight and so on, but keeping the bike as basic as possible. Hence plz suggestions if you know of any contact which are reliable.
Very nice... Sir can u provide me some information like handlebar price,how much comfortable and about that GT part so that i can also fit in ...
Sayantan tikader handlebar is 2500/- without weight. It is available in total enfield showroom as part of the explorer kit
@@LooseGravelthank u ... But can i only buy the handle bar??
Rear cylinder guard is about 260INR and available in Royal Enfield
Sayantan tikader yes you can buy handlebar but you also need to buy the handlebar weight along with it
@@LooseGravel ok... Thank yo so much..
Could you share some information about knuckle guards??
Sanjiv Pradhan I got knuckle guard from my friend it was used. You can check ACERBIS knuckle guards online. You can also check it from Hemant darbar- his number is mentioned in description.
ACERBIS are costly some 20k but the copies are available in 2-4K. Check in Ali express or wish website
Very good customisation
try Maddog FR70 headlight
Yes Maddog is a good brand but you want real true quality try FERetrofit ... one of the best i have seen in light till today.
Sir
What is. difference between sleet and std himalayan pls explain
sudarshan shetty there is no technical difference both are same the only difference is the colour. Sleet has the stickers while others dot have. Sleet is about 4K costly then others
Earlier when sleet was launched the first 500 vehicle was given an explorer kit in lessor price. Now sleet is available for everyone and explorer kit is also available in about 32k. The kit contains the handlebar, leg gaurd, panniers and panniers stay.
@@LooseGravel thanks sir
Hi, nice mods you have done. Can you please suggest from where you have done the relay and multiplexer part?
Deepraj Gandhi that is DIY. These are upvc pipe with stickers and inside copper plate with one wire in multiple wire out fixed with a 5 pin relay
Ok, so have you installed any fuse between battery positive and the output? If yes how much ampere? And specifications for relay. I guess you have a common relay for USB and aux lights, please suggest
So this is what i did
1. Took uPVC pipe and cut is small piece with both side enclosure
2. Tool the 5 pin relay with fuse (you can add fuse if you dont get relay with fuse)
3. point 86 relay goes to the rear parking light socket - dont cut the wires it can go int he socket withour cutting the wire (this is because you want to get the current only when the ignition switch is on)
4. Take 4 Sq mm low resistance wire 1 mt, 1.5 Sq Mt wire about 2 mt.
5. 87 goes to multiplexer - (4 Sqmm- this is nothing but a copper plate with four holes and nut welded (8no))
6. 85 goes to body earth
7. 30 goes to battery positive - this should be 4 Sqmm wire
8. you can take out wires from multiplexer and use it for horn / fog lamp/usb charger ETC
you can share your email to me on sujeetacharya@yahoo.com - i can share the wiring diagram
As hiamlayan is worth for off-roading how is it for daily city commute ? Company is claiming 35kmpl in city condition and 40kmpl in highway condition !
So what’s your experience with Fuel efficiency city and highway ?
Hi Shubham, It is definitely not more than 30kmpl in city but in highway it is very near to 30Kmpl. Lot of friend are using this for even daily commute but actual fun is in Long rides and off roading.
Where do I get one of those badass cages for the rear wheel??
Marshall Verkler I think you are asking for a panniers stay- you get it from Royal Enfield showroom.