Very nice my guy. Two suggestions; tablet install on the interior, it really makes the inside more updated. And two if your own stock motor mounts make yourself a engine leash. Trust you’ll feel the difference with the leash.
@@boostedsamuari7436 make it yourself my guy, I know on the group pages. 3.8performance responded to my post about my d.I.y leash and claimed they were building their set up the same but apparently had some complaints. So far I have had mines for over 6months and no issues.
great list of mods man, definitely not hating. But bro I would hit up your boy that did those headlights for ya. They are condensing on the inside because he fucked up and didn't seal them properly after opening em.
I mean there still a little camber, but it’s all natural with lowering the car. I haven’t done anything special camber arm wise or anything like that. It sits like this when it’s lowered
This is the light strip that was used. 2pc 24" Sequential Switchback LED Strip Kit DRL Turnsignal for Headlights Retrofit Halos Demon Eyes Eyelines and other Custom Lighting for Headlights www.amazon.com/dp/B01E0B2Z3O/ref=cm_sw_r_cp_api_glt_fabc_AS9F496BXAPT607KFCPP
Nah it’s good. The hood latch secures it. It doesn’t close completely bc the hood comes inc intact with the front frame of the car. So I had to raise the hood latch a bit. But will be fixing that soon
Short ram and cold air intakes really both effect turbo cars about the same, since they have to go through the hot turbo directly afterwards anyway. Larger diameter tubing/less restrictive filter will still net gains with a tune. Your biggest enemy will be heatsoaking of the intercooler pipes/intake manifold, not the air temperature when entering the intake.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
10:26 Nice check engine light lol
(but forreal, loving the work you've put in)
Just bought the same exact car in gray💪 bouta build it up great video bro
idek where to start man
That intro is fire. Simple and clean man looks good
Thanks my guy 💪🏽
Post more ya goof great content getting the 2011 coupe today!!
Lol will do! U got your gen??
Very nice my guy. Two suggestions; tablet install on the interior, it really makes the inside more updated. And two if your own stock motor mounts make yourself a engine leash. Trust you’ll feel the difference with the leash.
Yea I’ve kinda updated the interior, but yea I’m gonna need a bit more! And yea u think they have the leash for 2.0s?
@@boostedsamuari7436 make it yourself my guy, I know on the group pages. 3.8performance responded to my post about my d.I.y leash and claimed they were building their set up the same but apparently had some complaints. So far I have had mines for over 6months and no issues.
Well I took your advice and bought an engine leash for my 3.8, but I feel no difference whatsoever.
great list of mods man, definitely not hating. But bro I would hit up your boy that did those headlights for ya. They are condensing on the inside because he fucked up and didn't seal them properly after opening em.
Noted it was really cold that day. They normally aren’t condensed like this. But I do need them to be reopened and clean though
Thats wat i like about RWD 4 cylinders you can work on them pretty easy since everything is so accessible. My car is a pain in the ass😂
😂😂😂
Clean bro!
Thanks bro!
Clean asf 😍
Thanks bro!!👏🏽
Awesome luking ride bro..!!! Did you put any spacers in the front???
Nope. This is all from the +15 offset
You’re car is mad clean bro🔥🔥 looking into getting one soon!🔥
Thanks bro u should!!
I wonder how/if you could get chrome/clear tail lights and how they’d work
Nice work to the genny bruh
Look amazing bro
Thanks bro 👌🏽
Your headlights are cool but I’m curious if you could get them chromed/cleared out as opposed to black
What part of Illinois you from? Did you get check engine light when you replace 02 housing?
Elgin, and yea lol
I crashed mines last Saturday and I mist up the hole rear suspension, do you know any affordable coilovers for the bk1 ?
Hey I’m in the chicago area can I get the link to the guy who did those headlights for you?
Sorry bro, he no longer does them anymore 😔
Love it! What’s your wheel spec?
19s all around. 225/35 front, +15 offset. And 255/35 rear, +15 offset as well. 9.5 wide in front, 11 wide in rear.
Bro he literally explained it in his video…….
is there a link for the lip
Did you find it ?
@@alejandromedina5609 yes
It sounds so niceeeeeee
hey do you ever get pulled over for your exhaust? since you live in illinois?
Nope lol. I just don’t go crazy when I see a cop. I’ve been pulled over twice for other reasons though 😂
Make the oil catch can vid💪💪
Which short ram intake did you put on it? I plan on getting the forge bov and a short ram nxt month
Nice! I would get a cold air one instead, and yea i like the forged bov. But I want a hks one
@@boostedsamuari7436 i would but I’m too nervous about water getting in it during heavy rains
That’s true. But how low are u?
@@boostedsamuari7436 stock for now but in my area when it rains a lot water levels do get high often
Yea that’s risky
Nice coupe. How’d u get rid of the camber in the rear?
I mean there still a little camber, but it’s all natural with lowering the car. I haven’t done anything special camber arm wise or anything like that. It sits like this when it’s lowered
You can buy subframe risers to fix the rear camber
Yes
Which headlights did he customize for you? Those don’t look OEM.
Oem ones lol. He just painted the housing black and put hales in them with the rubbing led strip
Do all the 2011 2012 genesis coupes make that noise thing, the puthing noise
U might be talking about the lifter tick lol.
Did you roll your fenders in this video?
Nope, never did
What kind of angel eyes and led strips do you have
This is the light strip that was used.
2pc 24" Sequential Switchback LED Strip Kit DRL Turnsignal for Headlights Retrofit Halos Demon Eyes Eyelines and other Custom Lighting for Headlights www.amazon.com/dp/B01E0B2Z3O/ref=cm_sw_r_cp_api_glt_fabc_AS9F496BXAPT607KFCPP
Then I used diode switch back halos. 90mm and 70mm.
Can you break those 11’s loose or does it grip Iike crazy?
Hmm, I haven’t tried yet but I know it’s possible lol
Plus I have new content coming out soon, will be pushing +300whp by the end. So I’m deft gonna be braking tracking lil
the link to the front lip isnt working
Just updated it
what tires sizes do you have front and back?
Fronts are 225/35/19 and rears are 255/35/19
Aren't you afraid that the hood will fly off when you drive? since it does not close completely
Nah it’s good. The hood latch secures it. It doesn’t close completely bc the hood comes inc intact with the front frame of the car. So I had to raise the hood latch a bit. But will be fixing that soon
What kind of headlights do you have??
Custom built by Tyler Pierce here in Illinois
Like the video bro My Front Lip Is Looking the same way I paint it with plastip Dip looks Terrible lol
And i didn’t plasti dipped mine haha. I need to paint it 😭
Fire bro
Thanks bro!!
fire
Link to the clear side markers?
I gotchu
klearz.com/products/hyundai/genesisKDM
Also what kind of led bar did you use in them?
Still selling the mishimoto race intercooler?
Sorry bro, I know I’m late but it’s sold
What headlights are those?
Custom built. I have a vid coming out on my new headlight set up
Can that hood fit a bk2?
Doubt it
Also do you have a tune?
Nope! No tune. Hopefully I get one soon this spring
Link for headlights?
Sorry bro! These are custom done!
What year?
2011👌🏽
How man miles does it have?
106k miles
I heard RAM intakes do nothing.
Yea I got it with the car. A cold air intake would be much better
Short ram and cold air intakes really both effect turbo cars about the same, since they have to go through the hot turbo directly afterwards anyway. Larger diameter tubing/less restrictive filter will still net gains with a tune. Your biggest enemy will be heatsoaking of the intercooler pipes/intake manifold, not the air temperature when entering the intake.
you gonna get a tune? nice gen! 🤙
Yup lol
The cringe when he wiped the dirt with his hand
bro that hood fitment is terrible
I know 😂, I gotta get hood latches soon, and cut my original hood hook, or shave the base for it down it, won’t close all the way because if it