@@theradiantchild hi, yes to my understanding it definitely helped and brakes feel more comfortable. Rear brake not so much but I think that was my error for not checking the oil levels
Stunning bike!!! You have done an amazing job with your Continental, I have a 2019 chrome Interceptor that I am slowly replacing parts with upgrades, so much fun. These Royal Enfield's are just the best bikes!!
My my that is truly a stunning bike. What an absolute beauty! You've got yourself a fan here mate :D Been eyeing on this bike and the interceptor, kind of in a dilemma on which one to get but the mods on this is insane - thanks for sharing!
I have a Royal Enfield Continental GT650 in Rocker Red. So far, I have added quilted knee pads with a faint red thread, engine bars, centre stand and a black front fork brace.
amazing! i just picked up a 650 continental and your mod for the lights is perfect!!! please do a tutorial on how you did it,, that would be amazing... great work
I have done several similar mods. I agree, those pipe sound amazing. I have the same ones but still with the stock header pipes. Here is the list of changes I have made that have stayed on the bike. Did not bother to list those that I have since removed/discarded. Single Seat Rider - 1770009/B Single Seat Cowl, Black Magic - KXH0011/A Tall Flyscreen Kit - 1710010/B - I removed the metal plate in front. I like the looks of just the tinted flyscreen. Bar End Mirror Kit - 1720005/A Machined Swingarm Bobbin Kit - 1760109/C Machined Front Reservoir Cap Black - 1720032/E Center Stand Kit (this is the one from the INT650, turned out to be a direct fit for the GT) - 1915500/A Aluminum Sump Guard - 1760111/B - that I modified the front mounting bracket so that I could get the oil filter out without having to also remove/loosen the bracket Machined Oil Filler Cap Silver - 1740014/E Fork Gaiter Kit (rubber protectors) - 1990405 RSU Finisher for rear shocks - 1990445 - These were the most expensive black washers I have ever purchaed, lol. Installed XPEL clear protective film on the back of the tank where a belt or the zipper from the jacket might touch. Replaced all factory relays with better quality units. Great feedback on this from this forum. Ordered the Panasonic units from here: Mouser Electronics Remove rear grab bar/handle. Installed Grip Puppy Comfort Grips. Not fancy but very comfortable. Remove rear passenger foot pegs. My wife prefers to ride her own bike as she does not trust her life riding as a passenger with me. So no need for those Remove rear mud guard extensions and installed rubber plugs in the holes left behind Replaced front cross brace for a stronger and better looking CNC machined one made by a fellow forum member Replaced front fender with a polished stainless steel unit Replaced rear fender with black unit RAM phone holder with mount on unused right mirror mounting hole Replaced tag/license plate holder Installed different tail light. But want to replace with higher visibility alternative. Brighter LEDs Replaced Rear Brake Fluid Reservoir with a Triumph Speed Triple black anodized reservoir... Saddles bags - I had some SW-Motech Blaze saddlebags with brackets from my Triumph. I thought it would be nice to be able to use those again. Motogadget m-Blaze Disc Bar End LED Turn Signals - these lights are amazing! Super bright. Aftermarket black and polished brake and clutch levers Modified rear cowl by using the empty space inside the seat cowl to store rarely used tools. The Eastbound tire changing kit, patches, valve cores, etc. is stored in there now. Custom made oil wrench with Royal Enfield logo... I was bored... Black vinyl applied to the shocks reservoirs. Did not like the gold. EMGO Cafe Mufflers Chrome 80-84032 - Much lighter than stock units. Only drawback is that they are loud. Motone aluminum Cafe Racer emblems. To me, they just look cool. Secured them with rivets to the side covers as the double face tape that comes with it was not strong enough to hold them in place with the curvature of the side covers. Modified shift and rear brake levers... put holes in them. You know, to make the bike faster while also looking cool. Hitchcocks Fork Spring Pre-Load Adjusters Replaced keyed fuel cap with a Monza setup. Using a MON25X and a COLA25 from B.A.T. Inc. Made adapter cable to use Autel Scanner to read and clear any engine codes. Installed the Air Injection Delete kit from Hitchcock Motorcycles. Installed the CNC machined top yoke from Riga Billet Parts. I just love the looks. Because of the wait, Riga sent me CNC machined end caps for the rear adjusters. Replaced Front Pads with: EBC Front Brake Pads FA209/2HH Replaced Rear Pads with: EBC Rear Brake Pads FA213HH Tripmachine toolbag in tobacco. Stores all the additional tools I like to carry. Tubeless tires conversion using 3M tape and 290 Loctite Replaced stock tires with Bridgestone Battlax BT46 Sport Touring Tires Replaced stock headlight with Super Meteor 650 LED headlight Replaced stock clutch and seat release cables with Venhill cables Installed USB dual port (fork mounted) from Hitchcocks Replaced defective ignition switch MK Shorty Tail Kit - stored away in case I want to do that modification in the future Adapters (made by a fellow forum member) for larger rotor and caliper - stored away in case I want to do that modification in the future Several factory spare parts just for peace of mind. Also have better wheel bearings (NSK Japan) for when the stock ones start acting up.
bro you haven't got a GT Conti anymore! lol what an incredible list of upgrades man! I appreciate you sending me the list of all the upgrades! I will deffo look into it! I would really enjoy seeing the photos of your bike! hit me up on Insta @wolfget.media or email info@wolfgetmedia.co.uk Much love!
I think it’s these www.ebay.co.uk/itm/195516042769?mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338365712&toolid=20006&customid=EB151968420&amdata=enc%3A1IS88kabgSp62mS3jq_X7_g64&_trkparms=ispr%3D1
The parts are quite easy to get hold of I think most of the parts I got from hitchcocks motorcycles (I think they do shipping) plus have you heard of baak? They got some incredible kits for the bikes! Check it out!
@@wolfgetmedia3064 I know all these platforms, but in Germany, any parts which is not TUV approved cannot be installed and police is often controlling bikes. Only way, to do it is to register all these parts into bike registration document which has a high cost (would not make sense for a royal enfield bike...) Anyways, we cant have everything, for the time being, it is enough for me to watch other guys and imagine how my bike would look like hahahhaa Cheers man!
Just picked up a 73 plate in the UK with chrome tank and had some ideas of what I wanted to do…. Got new pipes and filter on the way, I’ve already cleaned up the tail myself. Your looks and sounds amazing brother. I’m no copy cat but some very nice mods there and great inspiration to carry on with my own. Ride safe 👌🏻
First mode 2-1 Stinger exh !!! I'm American and have had Harleys Suzuki & KTM 620 Duke bike however I'm getting a new Apex Grey 650 Jan 1 been saving to pay cash. I have already purchased stinger exh Bar end mirrors Black indicators !!! I'm past all the overpowered offerings we Americans tend to purchase this Continental is perfect and the fuel injection will be a welcomed offering because I live in Western NC mtns.
Great mod. Rear lighting is awesome. Can the GT handlebar raised a bit for touring more comfy position. Is there a aftermarket part available, pls advise. Thanks
I think you are on to something here!!! www.ebay.co.uk/itm/265005148721?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1XFA9gWF6TtewyWeYHlh7tw51&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&mkscid=101&itemid=265005148721&targetid=1816181028899&device=m&mktype=pla&googleloc=9045651&poi=&campaignid=19090194174&mkgroupid=147009364227&rlsatarget=pla-1816181028899&abcId=9303860&merchantid=101752947&gbraid=0AAAAAD_Lr1fIGWsdSlwBtH6CI5xHpZnST&gclid=CjwKCAjwitShBhA6EiwAq3RqAxi-FnmUXHx2D5xX5VAnmCGXD5QpEBf6FjiPaHn_Y8MMV5jKSLFtCRoCocIQAvD_BwE I have just found ittt!! ❤❤ thank you so much! Doesn’t it sound awesome and looks good on this bike?
Lovely bike, bargain exhaust system! I'm wondering if the rear number plate needs to be illuminated for mot's? I have the interceptor with the DNA air filter and back to back I can't notice any difference from the stock one. 👍🏴
@@aladinfox4098 hey! Where shoot are you from in wales?! I’m newport based. Soo it depends on how much you have driven the bike and wear in. I noticed the difference with just the air filter but the straight though exhausts really opens up the bike. Cracking deal on the exhausts! Literally lucky 🍀
so, I took it off original. www.amazon.co.uk/gp/product/B07JJ6VW1V/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 used this bracket that I had laying around. secured it by using simple screws and cable ties
backrest I've done too, total odo 18000kms, out of which 12500kms clocked for touring only, through all terrains, and my wife as a pillion. Style matters, but how many of you are using gt for touring also ? I'm not going to fetch a different bike for touring, only GT650
lovely..id much prefer that over say an R6 ... that has more character and less chance of getting a speeding fine... bikes for the everyman the RE .... nice one
How was the install for the bar end indicators? I would love to do them while simultaneously cleaning up the front headlight situation but I don't have much experience with drilling (through the handlebar) and electrical work. Bike overall is so clean. I use a solo seat so I don't think I'll do the same thing you did on the back end with lighting, I'm still figuring out what I wanna do there (Not thinking I wanna do a tail chop either). Love it man.
Well I didn't have any experience with drilling but i ended up making sure that I had the right drill bit. So, use proper drill bits and you'll be ok. Use a little bit of DW40 on the spot. the spot I would recommend to use would be the one right below the hole for the switches. when you loosen everything up and slide the switches you'll see there's a top hole on the handle bar to keep the switches in line and secure. I used this hole and drilled right below it to pass the wires through. this meant that I could hide the wires coming out of the bike into and you don't need to drill anything else. use a good quality wire heat srink. I would also keep a few motorbike fuses incase there is a brake in the wires. sometimes it happens. (remember to buy a flasher relay)
@@wolfgetmedia3064 Basically, he is saying that your muffler is more of a free flow type rather than a muffler with ceramic wool inside (used to reduce the sound level).
Also I forgot I upgraded the brakes pads from Hitchcocks!
Did that make much difference?
@@theradiantchild hi, yes to my understanding it definitely helped and brakes feel more comfortable. Rear brake not so much but I think that was my error for not checking the oil levels
This morning I had no idea humans could fall in love with a bike. Now I can't get this sound out of my head.
Addictive bro!! 🥰🥰
Dude these are the best mods ive seen yet. Love the new blinker / tail light!
Its so simple to make as well!
fair play you did a great job with the rear lights, the silencers are gorgeous and what a sound, well done
GREAT idea with the poly carb! Simple yet classy. Nice mods man
Thank you man! It’s so simple to make yourself. And I intend to find something more brighter that I can replace later in the year
@@wolfgetmedia3064 keep us posted 😄 cheers from Brazil!!
@@niihmalheiro Check out the new video ruclips.net/video/I-voCCe4yc4/видео.html (I crash and review why you shouldn’t buy)
Bro you should make a tutorial for those tail lights!! The People are loving it!
Thank you bro! I will try to do something shoot
Stunning bike!!! You have done an amazing job with your Continental, I have a 2019 chrome Interceptor that I am slowly replacing parts with upgrades, so much fun. These Royal Enfield's are just the best bikes!!
Love the rear tail light and blinkers. Very ingenious.😉👍
Thank you so much!!
Those bar end indicators are awesome
I couldn't agree more!!!
My my that is truly a stunning bike. What an absolute beauty! You've got yourself a fan here mate :D
Been eyeing on this bike and the interceptor, kind of in a dilemma on which one to get but the mods on this is insane - thanks for sharing!
I have a Royal Enfield Continental GT650 in Rocker Red. So far, I have added quilted knee pads with a faint red thread, engine bars, centre stand and a black front fork brace.
For some reason i find this video very pleasing
🥰🥰🐼🐼😇😇
@@wolfgetmedia3064 and to be honest, you have good voice bro and iam planning to get British green next month, thanks for the video keep it up
thank you bro! I have changed my colour since, I bought chrome tank. And it looks much better! Congratulations!
amazing! i just picked up a 650 continental and your mod for the lights is perfect!!! please do a tutorial on how you did it,, that would be amazing... great work
I’ll see if I can take the seat off and make a little short on it.
The rear light setup really finishes the rear end
Thank you so much!! It really does look good and it makes it complete in my eyes
Please make a detailed tutorial for rear light much appreciated. I need that one too
those tyres look great, would you be able to put a link of where they are from?
Hi Buddy, I don't think they make the Battax BT41 this. version anymore you'll have to get the newer models which I have done now. and they ride nice!
I have done several similar mods. I agree, those pipe sound amazing. I have the same ones but still with the stock header pipes.
Here is the list of changes I have made that have stayed on the bike. Did not bother to list those that I have since removed/discarded.
Single Seat Rider - 1770009/B
Single Seat Cowl, Black Magic - KXH0011/A
Tall Flyscreen Kit - 1710010/B - I removed the metal plate in front. I like the looks of just the tinted flyscreen.
Bar End Mirror Kit - 1720005/A
Machined Swingarm Bobbin Kit - 1760109/C
Machined Front Reservoir Cap Black - 1720032/E
Center Stand Kit (this is the one from the INT650, turned out to be a direct fit for the GT) - 1915500/A
Aluminum Sump Guard - 1760111/B - that I modified the front mounting bracket so that I could get the oil filter out without having to also remove/loosen the bracket
Machined Oil Filler Cap Silver - 1740014/E
Fork Gaiter Kit (rubber protectors) - 1990405
RSU Finisher for rear shocks - 1990445 - These were the most expensive black washers I have ever purchaed, lol.
Installed XPEL clear protective film on the back of the tank where a belt or the zipper from the jacket might touch.
Replaced all factory relays with better quality units. Great feedback on this from this forum. Ordered the Panasonic units from here: Mouser Electronics
Remove rear grab bar/handle.
Installed Grip Puppy Comfort Grips. Not fancy but very comfortable.
Remove rear passenger foot pegs. My wife prefers to ride her own bike as she does not trust her life riding as a passenger with me. So no need for those
Remove rear mud guard extensions and installed rubber plugs in the holes left behind
Replaced front cross brace for a stronger and better looking CNC machined one made by a fellow forum member
Replaced front fender with a polished stainless steel unit
Replaced rear fender with black unit
RAM phone holder with mount on unused right mirror mounting hole
Replaced tag/license plate holder
Installed different tail light. But want to replace with higher visibility alternative. Brighter LEDs
Replaced Rear Brake Fluid Reservoir with a Triumph Speed Triple black anodized reservoir...
Saddles bags - I had some SW-Motech Blaze saddlebags with brackets from my Triumph. I thought it would be nice to be able to use those again.
Motogadget m-Blaze Disc Bar End LED Turn Signals - these lights are amazing! Super bright.
Aftermarket black and polished brake and clutch levers
Modified rear cowl by using the empty space inside the seat cowl to store rarely used tools. The Eastbound tire changing kit, patches, valve cores, etc. is stored in there now.
Custom made oil wrench with Royal Enfield logo... I was bored...
Black vinyl applied to the shocks reservoirs. Did not like the gold.
EMGO Cafe Mufflers Chrome 80-84032 - Much lighter than stock units. Only drawback is that they are loud.
Motone aluminum Cafe Racer emblems. To me, they just look cool. Secured them with rivets to the side covers as the double face tape that comes with it was not strong enough to hold them in place with the curvature of the side covers.
Modified shift and rear brake levers... put holes in them. You know, to make the bike faster while also looking cool.
Hitchcocks Fork Spring Pre-Load Adjusters
Replaced keyed fuel cap with a Monza setup. Using a MON25X and a COLA25 from B.A.T. Inc.
Made adapter cable to use Autel Scanner to read and clear any engine codes.
Installed the Air Injection Delete kit from Hitchcock Motorcycles.
Installed the CNC machined top yoke from Riga Billet Parts. I just love the looks.
Because of the wait, Riga sent me CNC machined end caps for the rear adjusters.
Replaced Front Pads with: EBC Front Brake Pads FA209/2HH
Replaced Rear Pads with: EBC Rear Brake Pads FA213HH
Tripmachine toolbag in tobacco. Stores all the additional tools I like to carry.
Tubeless tires conversion using 3M tape and 290 Loctite
Replaced stock tires with Bridgestone Battlax BT46 Sport Touring Tires
Replaced stock headlight with Super Meteor 650 LED headlight
Replaced stock clutch and seat release cables with Venhill cables
Installed USB dual port (fork mounted) from Hitchcocks
Replaced defective ignition switch
MK Shorty Tail Kit - stored away in case I want to do that modification in the future
Adapters (made by a fellow forum member) for larger rotor and caliper - stored away in case I want to do that modification in the future
Several factory spare parts just for peace of mind. Also have better wheel bearings (NSK Japan) for when the stock ones start acting up.
bro you haven't got a GT Conti anymore! lol what an incredible list of upgrades man! I appreciate you sending me the list of all the upgrades! I will deffo look into it! I would really enjoy seeing the photos of your bike! hit me up on Insta @wolfget.media or email info@wolfgetmedia.co.uk Much love!
I'd like to see some photos as well!
So which are those pipes ?
@@vassiliossiagkos7959 EMGO Chrome Cafe Mufflers 19
where can i see pictures of the bike?
I love the way that pup comes in front like he's saying film me u fool😂❤️❤️ love gt n absolutely die for doggos🤩
can you share the link where I can find this side tank pad? I am not so sure if I found the correct one...
I think it’s these www.ebay.co.uk/itm/195516042769?mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338365712&toolid=20006&customid=EB151968420&amdata=enc%3A1IS88kabgSp62mS3jq_X7_g64&_trkparms=ispr%3D1
Great bike, I wish i could the same on my RE CGT650... lucky you are to be in UK for such modifications... In Germany, this is another story...
The parts are quite easy to get hold of I think most of the parts I got from hitchcocks motorcycles (I think they do shipping) plus have you heard of baak? They got some incredible kits for the bikes! Check it out!
@@wolfgetmedia3064 I know all these platforms, but in Germany, any parts which is not TUV approved cannot be installed and police is often controlling bikes. Only way, to do it is to register all these parts into bike registration document which has a high cost (would not make sense for a royal enfield bike...) Anyways, we cant have everything, for the time being, it is enough for me to watch other guys and imagine how my bike would look like hahahhaa Cheers man!
Just picked up a 73 plate in the UK with chrome tank and had some ideas of what I wanted to do…. Got new pipes and filter on the way, I’ve already cleaned up the tail myself. Your looks and sounds amazing brother. I’m no copy cat but some very nice mods there and great inspiration to carry on with my own. Ride safe 👌🏻
Thank you bro!! I have actually put a chrome tank on mine now 🙈 it looks incredible!!
Your tank looked great but I do love the chrome and bet it looks good on your bike to be fair. Keep on sharing any more improvements, your bike is 👌🏻
@@theanimojiguy2630 thank you so much!! I will clean it and make a new video once the weather ups a little bit.
Very cool dude just picked up a 24 and can't wait to mod it out
Looks like the Norman Hyde slip on exhaust that I have on mine
Some fuel management or at a minimum a booster plug is a good idea with a high flow filter and straight through exhaust.
I think you are right I’ll have a look into it
Good job really, love your black Labrador too
First mode 2-1 Stinger exh !!!
I'm American and have had Harleys
Suzuki & KTM 620 Duke bike however I'm getting a new Apex Grey 650 Jan 1 been saving to pay cash. I have already purchased stinger exh
Bar end mirrors
Black indicators !!!
I'm past all the overpowered offerings we Americans tend to purchase this Continental is perfect and the fuel injection will be a welcomed offering because I live in Western NC mtns.
just a beauty at its finest
thank you so much for watching! I am glad you liked the mods! Hit that subscribe button! will be making more awesome videos!!
Awesome mods dude! Btw what’s the song in the background it’s quite calming?
It’s just a random one found on @artlist
Great looking bike and the rear is nice and clean with these lights! Well done!
Thank you bro!
Excellent video, should make some more!!
You got it!!
Check out the new video ruclips.net/video/I-voCCe4yc4/видео.html (I crash and review why you shouldn’t buy) (here you go!)
Some nice mods there looks great
❤ le son magnifique 🤩
What a great revew! 👏🏻👏🏻👏🏻
You pipe is amazing 👏
Thank you so much! ❤
great looking bike mate
Hi! Great video.
The pipes link? Thanks
Cam you link the bar end lights brother ❤
Motogadget led lights
@@wolfgetmedia3064 thanks man appreciate it
Hey where did
You get the taillight and can it be shipped to India
I made it myself. Watch the video I explain how I made it.
@@wolfgetmedia3064 yeah thanks buddy
Very nicely shot, and the rear especially looks amazing! No need to have the number plate illuminated in the UK?
Tiny gripe. The music, too loud ,-)
Great mod. Rear lighting is awesome. Can the GT handlebar raised a bit for touring more comfy position. Is there a aftermarket part available, pls advise. Thanks
So there is the interceptor t stem and bar you can opt in for Turing I would recommend.
Looks great 👍 love it
thank you so much!!
What's the name of new exhaust
They are just standard cafe racer exhaust from memory I’ll see if I can find a link or something
Awesome looking bike dude!!! Does anyone know the end pipe part? Great video
did you replace the tubes when you replaced the tires? What size tube did you use if you did. Great looking bike!
I did not replace the tubes, Using the factory ones :)
Exhaust pipe is EMGO Chrome Cafe 19 ... ? Nice bike :)
I think you are on to something here!!! www.ebay.co.uk/itm/265005148721?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1XFA9gWF6TtewyWeYHlh7tw51&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&mkscid=101&itemid=265005148721&targetid=1816181028899&device=m&mktype=pla&googleloc=9045651&poi=&campaignid=19090194174&mkgroupid=147009364227&rlsatarget=pla-1816181028899&abcId=9303860&merchantid=101752947&gbraid=0AAAAAD_Lr1fIGWsdSlwBtH6CI5xHpZnST&gclid=CjwKCAjwitShBhA6EiwAq3RqAxi-FnmUXHx2D5xX5VAnmCGXD5QpEBf6FjiPaHn_Y8MMV5jKSLFtCRoCocIQAvD_BwE I have just found ittt!! ❤❤ thank you so much! Doesn’t it sound awesome and looks good on this bike?
@@wolfgetmedia3064 yess , they looks really good, also indicators are nice , I like it!
@@milojedolic252 motogadget ones (expensive but worth it)
Lovely bike, bargain exhaust system! I'm wondering if the rear number plate needs to be illuminated for mot's?
I have the interceptor with the DNA air filter and back to back I can't notice any difference from the stock one. 👍🏴
@@aladinfox4098 hey! Where shoot are you from in wales?! I’m newport based.
Soo it depends on how much you have driven the bike and wear in. I noticed the difference with just the air filter but the straight though exhausts really opens up the bike. Cracking deal on the exhausts! Literally lucky 🍀
Hi! Awsome bike! What did you do with the licence plate holder?
so, I took it off original. www.amazon.co.uk/gp/product/B07JJ6VW1V/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 used this bracket that I had laying around. secured it by using simple screws and cable ties
Good job 👏
And back here in india people are installing backrest and handle bar risers on gt 🤣
It makes me sad!! 😂😂 I thought people had style!
backrest I've done too, total odo 18000kms, out of which 12500kms clocked for touring only, through all terrains, and my wife as a pillion.
Style matters, but how many of you are using gt for touring also ?
I'm not going to fetch a different bike for touring, only GT650
If u wanted bike for touring u have meteor,super meteor, interceptor why gt and ruin it look
People are doing that to Interceptor, not GT.
@@adityaroy6337which one did you go with? My gf won't get on the bike without a backrest
How did you install the mirrors on the bar-end indicators? They don’t seem compatible as is.
Nice❤❤❤ and whats the baground music
lovely..id much prefer that over say an R6 ... that has more character and less chance of getting a speeding fine... bikes for the everyman the RE .... nice one
Thank you man! Absolutely is! But be prepared to make it your own. It takes effort and time not much money but definitely time and effort
How to buy this
Buy what sorry? the light? I made it myself. products are in the description
Anyway congrats. she dpes look very, very nice!!!
Thank you!
Hey! Amazing mods man. How do you fix the polycarb apparatus into the slot sonthat it sits tight?
Used an adhesive tape for now. Just used a stronger one that’s all
nicely done mate.
Awesome..looks dope, sounds good
Great vid thanks for sharing.
So clean.....❤
@@e-footballhunter2581 thank you so much!!
Looks awesome 🎉🎉
Check out the new video ruclips.net/video/I-voCCe4yc4/видео.html (I crash and review why you shouldn’t buy)
Hi can u tell me where u buy the end pipes from if u dont know the name please
Well done with the bike, mate! I am working on mine as well. Is the rear tire still at 18 inch?
Yeah still 18 inch just bigger tyre
Not to much nor to less simply clean af mods
Can you share the source from where you got those exhausts??
What;s the new power output?
I was wondering, what is the brand of the tank knee pads? Thank You
Hi, they are generic from eBay if you search for the bike name and knee pads they should come up. Make sure you pick the right ones
Too bad they don't idle slower, it would sound pretty nice. It does look good though.
How was the install for the bar end indicators? I would love to do them while simultaneously cleaning up the front headlight situation but I don't have much experience with drilling (through the handlebar) and electrical work.
Bike overall is so clean. I use a solo seat so I don't think I'll do the same thing you did on the back end with lighting, I'm still figuring out what I wanna do there (Not thinking I wanna do a tail chop either). Love it man.
Well I didn't have any experience with drilling but i ended up making sure that I had the right drill bit. So, use proper drill bits and you'll be ok. Use a little bit of DW40 on the spot.
the spot I would recommend to use would be the one right below the hole for the switches. when you loosen everything up and slide the switches you'll see there's a top hole on the handle bar to keep the switches in line and secure. I used this hole and drilled right below it to pass the wires through. this meant that I could hide the wires coming out of the bike into and you don't need to drill anything else. use a good quality wire heat srink. I would also keep a few motorbike fuses incase there is a brake in the wires. sometimes it happens. (remember to buy a flasher relay)
What exhaust is that??
Ur exhaust pipe brand name please
Which camera u are using 🙄
Hi Wolfget, I've got your same Continental GT and I like a lot the exhaust pipes tha you've bought. Where did you buy them? Thanks a lot 🙂
I got them second hand from Facebook and there is no branding on them
Which tyre ?
Wowow!! Pretty badass!
Bro very informative videos
Tasteful mods. Good job!
Thank you bro!
Which exhaust do you have?
I have no idea I think its EMGO Chrome Cafe 19 from one of the comments below.
@@wolfgetmedia3064 It sounds good and look nice in GT 650
not a fan of the tail lights
how is it in the rain since there is no mudguard?
@@abhinavlella2083 water on the road means bike on the garage. But it’s not bad, it works esh
Ahhh Blissful ❤❤
It's 🔥 🔥 🔥
extract that bloody music ... sounds like somewhere in the Supermarket !
lol 😂 thank you for your comment x I will take care next time x
Exhaust name
I think Your exhaust don't have any ceramic wool or any thing, it's just a flowing air outside like you pipe
Thank you for your comment but I don’t understand your comment?
@@wolfgetmedia3064 Basically, he is saying that your muffler is more of a free flow type rather than a muffler with ceramic wool inside (used to reduce the sound level).
@@prathampandey7089 aaa makes sense now
@@prathampandey7089 the end can have some sort of sound grid thing
👍👍👍👍👍👍
Cool amateur video. I enjoyed the real life testimony without all the editing. Ride safe!
Beautyfull Bike❤
nice
We indians sure know how to ruin this beautiful bikes by adding backrest and handle riser on them😂
lol cringing bro 😂
exhaust sounds like someone farts in can
Hi, thank you for your opinion
Please remove background music 😢😢😢
She's beautiful
OK, no need for me to listen that that music.
Uhh.. ahh.. ahh.. uahh.. auhh.. uhh.. umm.. aaa.. ahmm.. aah.. amm.. ah.. so.. yeah.. and.. uhh wtf
@@AR-EL035 love it
Not a very informative video, but thanks!
Thanks for you comment, what information would you want in the video? I can include it in the next one.
Many thanks
Indian bro ! Maruti Swift in the background. Wtf ?❤
I know bro! lol covid happened so got a smaller car! used to have a JEEP before! that was nice!!
@@wolfgetmedia3064 dude, totally got it. I was surprised they even sell it there. No offense. Greatjob with the gt tho.