You don't need to shout, though I'm thousands of miles away..... I've already tried all that, I'm watching to see if there's an option for my issue not someone having a series of guesses. Thanks all the same, its hard and time consuming to make content.
Thanks for the content! Bro you don't have to yell Lol....I appreciate the excitement though. Also, check the audio settings for Chime sometimes which gets disabled. Select and Re-Select that might resolve the issue!
I've tried all that and then what I've checked in at work the triumph prone network can reach my various cameras all over but the chime pro is directly on the other side of the wall of the ring and it says the ring has connected to the triumph pro network but when you look at the status no connection
Came here after trying all that, so it seems you also don't know any other way. I'm sure most people came here after trying all those very basic steps.
I was using the wrong password!! Double check that you are not making the same mistake. However - I installed it near the wi-fi source, but as soon as I moved it away, it would not hold the signal. The older ones - type 1- work fine!!!
@@Smiler7 That's daft. But I am using the correct password which is frustrating. If the Doorbell connects fine with that password then the chime should as well.
@@BigBubbaloola It is the Wi-fi router password you need. If you are using the correct password and have the chime near the router to set up then I am stumped.
Helpful. But you might want to put your script OVER the camera, because it is so obvious watching you constantly glancing oddly to your right, bending over and squinting, to see it.
I only made 13 seconds in and then searched for another video
Me too!
You don't need to shout, though I'm thousands of miles away..... I've already tried all that, I'm watching to see if there's an option for my issue not someone having a series of guesses. Thanks all the same, its hard and time consuming to make content.
I did all the above and it still didn’t work!
I have already tried every suggestion you mentioned except for restarting my cell phone. Shut the front door it worked, thanks a bunch.
Doesn’t matter at this point. I won’t be able to hear the chime after listening to this video
Even with volume on mute I can still hear you!!!
Thanks for the content! Bro you don't have to yell Lol....I appreciate the excitement though. Also, check the audio settings for Chime sometimes which gets disabled. Select and Re-Select that might resolve the issue!
I've tried all that and then what I've checked in at work the triumph prone network can reach my various cameras all over but the chime pro is directly on the other side of the wall of the ring and it says the ring has connected to the triumph pro network but when you look at the status no connection
luckily there are subtitles and don't have to hear that voice
Came here after trying all that, so it seems you also don't know any other way.
I'm sure most people came here after trying all those very basic steps.
Use inside voice....LOL
No good - tried all your suggestions.
I am getting a message that I have 'entered the wrong password for my wi-fi', which i am not!
Same here. Did you find a solution?
I was using the wrong password!! Double check that you are not making the same mistake.
However - I installed it near the wi-fi source, but as soon as I moved it away, it would not hold the signal.
The older ones - type 1- work fine!!!
@@Smiler7 That's daft. But I am using the correct password which is frustrating. If the Doorbell connects fine with that password then the chime should as well.
@@BigBubbaloola It is the Wi-fi router password you need.
If you are using the correct password and have the chime near the router to set up
then I am stumped.
@@Smiler7 Yep. I'm getting it replaced in the hope the situation changes but I'm not confident.
Not very useful - not professional either. Look somewhere else if you need a tutorial
Thanks for the help. But, don't do coke before recording these.
😂
Made it 2 minutes. Got a headache and eyes blurry
Helpful. But you might want to put your script OVER the camera, because it is so obvious watching you constantly glancing oddly to your right, bending over and squinting, to see it.
Your not annoying one little bit. You should be a kids tv presenter. 🤡
Thank you!
Hold down the RESET button for 30secs, then setup the Ring again on the 2.4ghz Network (All Set). You're Welcome.
Dislike
The ring chime pro,is meant to work like a wifi extender!
Dude im at a library keep it down
Wish I read the comments first. Nothing here the apple website doesn't already cover. Audio is annoying.
Thank you for the information.
Dude your too much for me
Tried all that didn’t work I’m just gonna return it
Why are you yelling? Get off the drugs homie
You talked too much. Showing us how to setup.
This guys nuts.
Nothing said
Jeeze. No need for the shouting...
Just a piece if junk
Calm down and stop screaming
Waste of time!
Whats wrong with you
Your presentation skills suck so bad I would never take your advice on any topic. I couldn't even get though your whiny, animated initial greeting.
This video (and this guy are) is a joke!!!!!
Clown
stop shouting and talking so slowly
Y’all I found the trick update your ring app on your phone and then try to connect