Can we all just sit back for a moment, in awe no less, and appreciate how flawlessly and well balanced this video is, gaping maws wide at the inclusion of the neck snap Vanilla Ice, Joe Pesci in some fantastic movie sound bites, AND the return of the mighty Techno Viking also!?! Bravo, sir. Bravo.
Doug, if you can't hold the trigger from one end to the other you are tacking not welding. Just take 2 minutes on a scrap piece to get your settings right and then weld away. Less grinding and better, stronger bond between work pieces. Plus faster fab time. Better all around in the long run.
Each one of those battery frames could have been done from one piece of metal instead of 4 pieces since you had/have the battery jig. Did that back in the 80's for a dual battery setup for a pair of Orion HCCA 50 watters. Damn I miss the 80's.
Haters gonna hate, absolutely loved the video again man. Always have my gut on the ground cause you split my sides open from laughing so damn much. Love your shit man
I agree...too much filler but I always look forward to his twisted sense of humour if nothing else. At the end of the day nobody is forcing you to watch it. A wise Dr once said, "Be who you are and say what you feel because those who mind don't matter and those that matter don't mind"...Dr Suess
Waiting metal you should group them together on one rack with a tie down bar holds them down. Everything you can tie together and ground through the rack makes for better electron flow and the higher you can hop. But the return of techno viking is the shit.. !
He's running 48volts so you can't ground through the rack,plus he needs to put a emergency disconnect in the ground wire to the pumps in case the solenoids stick.
@@southjerseysound7340 it doesn't matter how many volts you are running always weld rack to frame and ground through it the quick connects are for pumps and solenoids
Jeezlus! No wonder the mugs aren't selling. I know its a fund raiser and all that jazz but $15 dollars for a cheesy coffee mug with some funny shit on that no one will get but me... Ok you sold me. I'll take one. PS. make'em 8 bux and maybe I will buy another and hide it at work to see if anyone gets it. You're welcome.
It's nice to see Techno Viking making an appearance.
Techno Fucking Viking ^_^...
Seeing that Russell mug reminds me of a joke; What's better than roses on your piano? Tulips (2 lips) on your organ!
i posted that shit last week!!!
@@stevenmachurick2712 COOL, So you think it's funny too!
Doug made that joke when he first showed the mug.
P.s. you would use a colon there, not a semicolon
Can we all just sit back for a moment, in awe no less, and appreciate how flawlessly and well balanced this video is, gaping maws wide at the inclusion of the neck snap Vanilla Ice, Joe Pesci in some fantastic movie sound bites, AND the return of the mighty Techno Viking also!?! Bravo, sir. Bravo.
Dude. Watching this after like 6 shots is a trip!!!!🤣😭🤣😭🤣😭🤣😭
Only Russell puts videos on premiere
Doug, if you can't hold the trigger from one end to the other you are tacking not welding. Just take 2 minutes on a scrap piece to get your settings right and then weld away. Less grinding and better, stronger bond between work pieces. Plus faster fab time. Better all around in the long run.
I must say your use of the techno Viking was superb!!!!!
Techno Viking is a legend! :D Just keep him away from Rafa's mom.
Nice metal work, Sir Douglas!
These episodes go by quick. Wasn't too long ago that i started watching you doug, keep on keepin on.
This rack is gna be sick Doug - love the idea of dipping into the wheel well. Hugs and kisses from Techno Viking
if Doug spent as much time doing actual work as he spent splicing in silly cuts into his videos, he'd be rich (insert needless explosion into comment)
You mad doggy 🐕?😂😂😂
Dude I love how you put all the old badboybill and Richard humpty vision mix tapes in your videos!!! No-one else does that!!!
Douggggggg we need longer episodes man!!!! Or bring back the every day vids man! Can’t get enough!
Doug, your welds are lookin a 💯 times 👍
glad to see you use that jigsaw on the angle iron... the cut off wheel was killing me. ♥ you
sound man really more like MILKMAN how long can you stretch out the batty box?
I stopped watching 2 mouths ago and just caught up! I have to say it’s been the best week of my life!!! Keep up the great work Doug ❤️
SoundmanCA is the best channel on RUclips ! Thanks Jason ❤️
Each one of those battery frames could have been done from one piece of metal instead of 4 pieces since you had/have the battery jig. Did that back in the 80's for a dual battery setup for a pair of Orion HCCA 50 watters. Damn I miss the 80's.
Another good video Doug. Nice progress on the battery rack. Hope you don't forget fire down points
I meant tie down points
It's gonna twist.
its going to swell
RIP IT!!!
I like that Windows 95 tada.wav
Had me Rollin today Thanks, the drop down rack is cool idea
Haters gonna hate, absolutely loved the video again man. Always have my gut on the ground cause you split my sides open from laughing so damn much. Love your shit man
your projects need viagara to get them to the end. I also really enjoy watching you send welding slag into the mule, enjoy the burn holes.....
I'm not one to complain...does every Monday and Thursday at 10
The battery rack is gonna TWIST!!!!!
The addition of the techno Viking is great!
Well that would be the true definition of a win-win situation
I agree...too much filler but I always look forward to his twisted sense of humour if nothing else. At the end of the day nobody is forcing you to watch it. A wise Dr once said, "Be who you are and say what you feel because those who mind don't matter and those that matter don't mind"...Dr Suess
Waiting metal you should group them together on one rack with a tie down bar holds them down. Everything you can tie together and ground through the rack makes for better electron flow and the higher you can hop. But the return of techno viking is the shit.. !
He's running 48volts so you can't ground through the rack,plus he needs to put a emergency disconnect in the ground wire to the pumps in case the solenoids stick.
@@southjerseysound7340 it doesn't matter how many volts you are running always weld rack to frame and ground through it the quick connects are for pumps and solenoids
Good shit today Doug!! Enjoying your s*** all the way from Nebraska man. CT sounds grew big here in the capital of the Midwest
Best thing on RUclips! Thanks Doug.
I bought one of the damn mugs. Smh, I'm so ashamed.
Love watching the show doug 😊
Btw, Thoes battery racks are pretty "swell"
The wood is going to swell and twist the battery rack
Jeezlus! No wonder the mugs aren't selling. I know its a fund raiser and all that jazz but $15 dollars for a cheesy coffee mug with some funny shit on that no one will get but me...
Ok you sold me. I'll take one.
PS. make'em 8 bux and maybe I will buy another and hide it at work to see if anyone gets it.
You're welcome.
Daaaymmm.. that shit looks like it was made to go there!! 😂😂 Looking sweet!
great thinking on that battery rack
I see the ct sounds speakers on your work bench that if I remember was supposed to be in a giveaway.
Damn it Doug buy a chop saw! 😁
That rave guy was cracking me up😂😂😂
Techno Viking is the shit
ruclips.net/video/UjCdB5p2v0Y/видео.html
I wish I was there....
Time to invest in a chop saw Douglas.
Doug Bernard is making bass RUclips videos badass again. 💪✌👍 Thursday morning let me begin by saying WTF 🤣
Who the f***' is Russell anyway!!!
I'm John Work The Big Fat Jerk!!!!
C-Mon make fun of me lolol
I do miss the mule but glad your Tbird is gettn better. Love the vidz!
You know what I miss is the Midget Disco that shit cracked me up
like the added dragon's liar sfx and was that some Goonies score in there?
Weld you look at that. It's going to explode and twist the the turd 🦃 frame 😆😅😣😌🤪🤔😶. Another nice vid👉😎👈👍. Oh well,✌️out DB from Modesto209
I'm a simple man, I see Techno Viking, I hit like
I love everything about the show... but the techno trance shit during the sped up scenes is killing me Doug. Killing me.
That battery bracket is going to twist.
Another amazing ep can’t wait for more
@15:42 I was lmao with that fake under breath laughter cry ..hahahahahah 😂😂😂 that shit was funny af ....!!!
Everyone likes a bit of Techno Viking!!!!
With the frames so tight - what's going to happen when you prime and paint them? you didn't give enough clearance.
Techno Viking is here to dance and slay dragons.
that was my comment about fight club. doug we are onto you the conspiracy is real.
Love your shit man, never stop.
Doug’s over here using shrink wrap tubing from harbor freight lol
nice work doug..
Why not use the 30 ft, obnoxious "safety" cut off to tie the batteries together and get another solenoid and wire it as an arm/disarm switch?
Dear Doug, your tbird is fly as phuck. That is all.End transmission
Oh shit techno viking!
If you want more views, tell me your sub specs so I can send you a dope amp! And quit forgetting to sign people’s sweatshirts. Lmfao!
Doug's to busy begging for money. I'll send you some specs and you can send me an amp.😂😂😂
Doug would you look at it! Rich stuff!
Smashed it ten times!!
Banging tunes today 😀😀😀
How many episodes building this rack are you gonna have? Like the 150's amp rack? I feel a cliff hanger coming on.
What will little Dougie do when he runs out of his dad's leftovers? No more 0 gauge wire, what's next?
I think Doug built the entire car in a month then made 88 episodes out of it
Fuck I actually love these videos so much 😂
I find myself fast forwarding a lot
yep
Lookin sick!!!
Lets go Full Trottle Julia!!!!
fuckin cuda
Ok somebody has to link me to the giant albino EDM guy 😆
Everyone is roasting you Doug.
U russelled the shit outta them welds!
Who's bed frame did you cut up ?
keep them coming Doug,,,
Why didn’t you 3D print the battery racks?
Techno Viking........the only man to defeat Chuck Norris in a dance off
Make bass already doug
Lmao😂😂 recking ball? Really Doug?😂😂😂😂😂😂
Angel dust homes!
Dude Techno Viking rules I watched him back a while ago
Doug ur fuckin amazing I learned a lot of stuff watching ur shows and always laugh my balls off
Techno Viking for president 2020.
How does he get away with using Goonies soundtracks for his vids?! 🤣
for the second straight episode i feel like i should get a refund.
His name is Russell Francis Jr His Name is Russell Francis Jr .. His Name is Russell Francis Jr
Crows feet on fleek
Good job bro.. keep it up
Whoa! TechnoViking!
You should make the rack out of two pieces instead of welding pieces together. Would be a lot stronger!!
You can notch and bend them from 1 piece even.
Doug wat bout the mule its been long forgotten fml !
Ya the Techno Viking.
Dude the techno Viking looks like Bryan from tekken
ALL HAIL TECHNO VIKING!!!!!
I love a lowrider but iam just saying bro !
What's the deal with the jigsaw????