@@thescunt1225 it’s a little more than that. The GM has a different cockpit section, backpack, knee armor, and the Beam spray gun. But yeah it should still be relatively easy to make a new GM.
Isn't that basically asking to make something akin to the FINE BUILD SYSTEM used for recent Gundam grunts and 30MM, but for Entry Grade? At least, that is how it sounds to me.
I bought this for $10 and it is more enjoyable, no stress build & wide range articulation compared to an RG kit worth $30 that has limited articulation, troublesome small parts that keeps falling apart.
Here it's simplified and integrated into the yellow parts of the rear hip flaps as the frontpiece of the entire rear lower torso segment. Beyond Global DOES colour-seperate the little yellow V too, the EG is basically a heavily cut-down Beyond Global sculpt with 30 Minute Missions jointing (HG Leo elbows and knees + simplified ankle balljoint and non-hinged ankle guards) minus the copius amount of polycaps 30mms kits use.
this is a new line, they are redesigning most of the stuff now so the older kits are obselete, you will definitely see this pattern for the rest of the year.
Awesome video... Great kit for its price.. Just be careful with the hip to thigh joint 2:41 - 2:46. If you pay attention to that scene, that joint is tighter than the usual Bandai tightness (if that makes any sense). I saw a fellow builder that already broke his Entry Grade kit (saw it in a Gunpla Facebook Group). So if ever your kit has a really tight joint too (not just this kit but any kit in general), sand the joint to achieve the desired tightness... Never force the joint to move specially if you see the white stress mark.. My Super Mini Pla Megazord had a really tight joint and I didn't take it seriously, I forced to move it and it broke, good thing I have recasting/molding materials so I was able to replicate the joint, sanded it down for good measure.. If I only sanded it down, it would not have taken me longer to finish the kit.. So prevention is better than cure(as always)
This looks amazing. I would love to see if it could be updated with option sets ala the 30 Minutes Missions line to change it to a GM or to add in different weapons.
The fact that it's on par with the revive and maybe almost better for a kit with two runners is just amazing! makes me scratch my head on why bandai can't do clever ways to make incredible color separation with other kits that rely on stickers?
I wonder if Bandai would make more EG kits based on other mobile suits. I just bought this and it was fun to build and pose around. I wish we could get Zaku II, Exia, Nu and Zasabi someday.
Bandai: hey we got you guys a core gundam size rx 78 Gunpla builders:.....pulls out god hand and a lot of paint Bandai: wait what are you doing it said no paint or nippers required Gunpla builders: CUSTOMIZATION TIME Bandai: ah shit here we go again (Just a joke lade gunpla custom is awesome and fun to do 🙂)
I hope they can extend this to other models as well. Do a release for all the Gundams. Personally, I would want to get a set (maybe 2 sets) of the Gundam Wing: Endless Waltz series.
Ok Bandai, how about release entry grade Zaku? Zeonic mobile suit need more love...maybe you can suggest Katoki to create Zaku ver.Ka too, please Bandai !
@@gakeeeen NO, there are 1/100 and 1/144 HGs and so far there's only 1/144 EG.. The "HIGH" and the "ENTRY" grade DOES NOT determine the size, it determines the QUALITY and price of the kit.. The scale e.g 1/144, 1/100 or 1/60 etc, is the factor that determines the height.. Just to be clear to avoid confusion...
@@gakeeeen So what? HGs still have 1/100 scale so the answer IS NO, EG and HG aren't the same height. IDIOT.. Don't spread misinformation.. You're making other people be like you who thinks that Grades determines the height.. Get out!
@@gakeeeen So what? Doesn't change the fact that the answer is no.. Edit.. Man, you called me dummy.. That got me fired up.. Ok I'll be chill my B. I see your point, I just want to be specific.. I apologize for the harsh words.
@@gakeeeen No, I get what you mean.. Like I said I was just being specific.. He also probably mean to say HG 1/144.. I was just being technical for no reason.. It's all good..
![[CUSTOM GUNPLA] I rebuild a 5 dollar ENTRY GRADE RX-78.](/img/1.gif)
Bandai has come a long way in engineering kit design. You can see the evolution on how they made their kits.
So glad we are able to witness this.
Gonna get this just to practice painting and customization
Same gonna try to custom paint it to casval
That is what i was thinking
Not just Casval ... Real Type & G-3 also. Just hoping it will not cost too much MYR
@@mohdnashriq8655 check gundam.my. only RM28
i bought a unicorn perfectability just for shits and gigs painting practice
I hope that one of these days, they would release an EG or revive kit for the GM.
Fr I think EG would be better since it's a mass produced suit
EG Gm and Zaku's is a Priority
Well yes it uses the same build as the gunda. Except the waist and the head
@@thescunt1225 it’s a little more than that. The GM has a different cockpit section, backpack, knee armor, and the Beam spray gun. But yeah it should still be relatively easy to make a new GM.
Finally a enemy for my vacation toy Rx 78 2 gunpla!
So Gundaminfo has joined the ASMR community. XD
Wow, never thought an entry grade could have a color separated crotch
Hope this is developed further into Grunt focused grade for army builders.
Isn't that basically asking to make something akin to the FINE BUILD SYSTEM used for recent Gundam grunts and 30MM, but for Entry Grade? At least, that is how it sounds to me.
ASMR: GunPla edition.
This is relaxing and satisfying to watch btw, good job Bandai team.
Dang, Entry grade? Absolutely epic for those who just got into outbuilding
Bought this for my housemate's son to (hopefully) get him into the hobby.
This is perfect for beginners, Entry Grade or Easy Grade, this is perfect for my nephew that loves gunpla as well!
Perfect for begginers, It only misses the beam saber effects, despite that is perfect
이건담은 입문용으로 정말좋아요
가성비 디테일 다챙겼어요
This video is quite pleasing to the eye. Well done!
"no tools needed" * TEARS-OFF SHIRT AND FLEXES MUSCLES *
Almost forget one thing you need is flex seal
@@notelid4308 there is alot of flex tape product
@@notelid4308 Here www.flexsealproducts.com/product/flex-seal-liquid-rubberized-coating/
cringe
@@ChrisTian-sd5yq yes cringe
I bought this for $10 and it is more enjoyable, no stress build & wide range articulation compared to an RG kit worth $30 that has limited articulation, troublesome small parts that keeps falling apart.
The RG RX-78 was a basically a fiddly prototype lol, at least the later RG kits like the Nu and the Crossbone were amazing.
why this kit crotch v section is better than the HG, like seriously does it cost so much that they dont make it separated?
Agreed I'm very upset my high grades require a sticker there but this doesn't
Here it's simplified and integrated into the yellow parts of the rear hip flaps as the frontpiece of the entire rear lower torso segment.
Beyond Global DOES colour-seperate the little yellow V too, the EG is basically a heavily cut-down Beyond Global sculpt with 30 Minute Missions jointing (HG Leo elbows and knees + simplified ankle balljoint and non-hinged ankle guards) minus the copius amount of polycaps 30mms kits use.
Tell me about it. I noticed that to,when the person started building the kit.
this is a new line, they are redesigning most of the stuff now so the older kits are obselete, you will definitely see this pattern for the rest of the year.
I love Bandai
Man so far this is the most entertaining speed build video i've watched.
Awesome video... Great kit for its price.. Just be careful with the hip to thigh joint 2:41 - 2:46. If you pay attention to that scene, that joint is tighter than the usual Bandai tightness (if that makes any sense). I saw a fellow builder that already broke his Entry Grade kit (saw it in a Gunpla Facebook Group). So if ever your kit has a really tight joint too (not just this kit but any kit in general), sand the joint to achieve the desired tightness... Never force the joint to move specially if you see the white stress mark.. My Super Mini Pla Megazord had a really tight joint and I didn't take it seriously, I forced to move it and it broke, good thing I have recasting/molding materials so I was able to replicate the joint, sanded it down for good measure.. If I only sanded it down, it would not have taken me longer to finish the kit.. So prevention is better than cure(as always)
2:50 "BEAUTIFUL SPREAD"
“Ball joint at the waist which ofc allows for a swi-“
Perish.
Jobby...
Wish entry grade release some models. So beginner can build gunpla too w/o tools
Not only that but EG Zakus would be just so goood for army building
bro it looks so clean without even sanding it
Entry Grade well from Lottery draw you can build as RX-78 Gundam
That color separated head blew my mind
This is amazing. Love this version too and only 74 parts.
I hope there will be a EG Zaku
Other People : We Need Tools to Building this Modelkit Gundam
BANDAI : No Tools to Building this Modelkit
Note :
Me : Alright, Good Job BANDAI:))😅😁👍
2:50
Jobby: Beautiful spread!
This looks amazing. I would love to see if it could be updated with option sets ala the 30 Minutes Missions line to change it to a GM or to add in different weapons.
I wish all gundam kits were like that
i want the cookies dammit
bandai now realizing they can get into the asmr business too
should i get this or HG revive???
The fact that it's on par with the revive and maybe almost better for a kit with two runners is just amazing!
makes me scratch my head on why bandai can't do clever ways to make incredible color separation with other kits that rely on stickers?
The only downside is no beam effect parts, but still a good kit.
Well technically bandai can release a deluxe version of this easily, which can include beam saber parts and a bazooka
@@迷因唐三藏 oh God I feel like they're gonna go crazy with this idea, my wallet is scared.
@@迷因唐三藏 itll be twice the price and only come with the bazooka and beam parts extra
@@thedandy6765 Maybe bandai will include some long forgotten RX 78 2 weapons
Alan Ng you mean P-Bandai right??? Hopefully Bandai don't take it seriously otherwise our wallet will hatch butterfly
I will definitely buy this kit. Thanks for sharing.
wonder when we get entry grade zakus
It's so easy man
Can’t imagine how good this must be to paint
Looks really good
the great thing about this grade is you don't need to put stickers, and it looks better.
i love entry grades for dioramas
건프라 입문자들도 마음 편하게 입문하기에 좋은 프라이군요 제 동료들한테 알려줘야겠어요
This entry grade Bandai was great, people would be bought Entry Grade than Non Original, hope other model available entry grade version ;)
I'd like to try this new line. Looks promising
Such a well-made video. Great job - as always!
There's something oddly relaxing about this video
Finally. An entry grade that doesn't suck
Gundam info ... Building Gunpla ... Nice
Beautiful tools
I wonder if Bandai would make more EG kits based on other mobile suits. I just bought this and it was fun to build and pose around. I wish we could get Zaku II, Exia, Nu and Zasabi someday.
We are getting an eg strike gundam
I just got one ! Worth it 👍🏻
The last entry grade you gave me did not have bendable joints and became loose over time because of the plastic grinding
I should buy that kit again since my Rx 78 2 figure leg was break
nice vid bro. this gunpla is IDR 140.000 here (less than 10 USD) in indonesian e-commerce. looks pretty cool with a good price!
Bandai: hey we got you guys a core gundam size rx 78
Gunpla builders:.....pulls out god hand and a lot of paint
Bandai: wait what are you doing it said no paint or nippers required
Gunpla builders: CUSTOMIZATION TIME
Bandai: ah shit here we go again
(Just a joke lade gunpla custom is awesome and fun to do 🙂)
Hoping for an eg zaku so I can army build like 3 or 4 green and one of the hguc chars zaku II.
Perfect for my daughter, thanks bandai
I wanna buy some of these just for painting practice!
i like to have this kit, hope bandai will release it very soon or before christmas!!!
Can you plss make a zaku in entry grade
thanks for the video.
I hope they can extend this to other models as well. Do a release for all the Gundams. Personally, I would want to get a set (maybe 2 sets) of the Gundam Wing: Endless Waltz series.
So far, the Lite packaging version is available for retail.
The first release is only for TGB and Hobby Shops (including the ones outside Japan.)
I got this yesterday! :D
Pls. make more ASMR videos for old and new gunpla kits😍😍😍
No beam sabers? Well that sucks
Where can we get the cookies?
This looks fun
I want zacu to come out in this style.
So easy complete!
30mm Gundam. I like.
I like this video build gundam
Ok Bandai, how about release entry grade Zaku? Zeonic mobile suit need more love...maybe you can suggest Katoki to create Zaku ver.Ka too, please Bandai !
I wish bandai would release the weapons add-on alone, cause i bought the kite version and i really want to get it, its own accesories to hold on
Iam ordering that because i had a gunpla that just broke bc i needed “TOOLS” so ye
I am suprized that even though the leg connection is made out of a ball joint it still has a good enpugh split
Because there is a small cut in the ball socket to allow more articulation.
I love gundam
I wanna ask, what's the bgm you used during the action?
very affordable, i love it
i hope you guys make more entry grade the same price as this
amazing.by malik indonesia
very good!!!!!!!!!!!!!!!!!!!!!1
Come on bandaid made more entry grade gunpla😭
Reminds me of the old MSIA series besides materials obviously
Just if it were possible to make all lines of the kits this easy to be cut off of the runner it would be great
Is this grade have the same price with SD Gundam's?
no stickers HECK YEAH
I want one Where should I buy??? Plz tell me 🙏
I wish you have put the beam effect
Now we need a entry grade char aznable zaku
これは連邦のプロパガンダか
Is the High grade and Entry grade has the same Height ? Enlighten me brothers
@@gakeeeen NO, there are 1/100 and 1/144 HGs and so far there's only 1/144 EG.. The "HIGH" and the "ENTRY" grade DOES NOT determine the size, it determines the QUALITY and price of the kit.. The scale e.g 1/144, 1/100 or 1/60 etc, is the factor that determines the height.. Just to be clear to avoid confusion...
@@gakeeeen So what? HGs still have 1/100 scale so the answer IS NO, EG and HG aren't the same height. IDIOT.. Don't spread misinformation.. You're making other people be like you who thinks that Grades determines the height.. Get out!
@@gakeeeen So what? Doesn't change the fact that the answer is no..
Edit.. Man, you called me dummy.. That got me fired up.. Ok I'll be chill my B. I see your point, I just want to be specific.. I apologize for the harsh words.
@@gakeeeen No, I get what you mean.. Like I said I was just being specific.. He also probably mean to say HG 1/144.. I was just being technical for no reason.. It's all good..
❤️👏👏👏👏Cool and when it can go on sale on Aliexpress
#universalcentury forever!!!
It's look like better than the revive I think
I've buy it :D
This is actually cheaper than many shokugan candy toy figures- NANIIII?!?!
Ahh wish i had God Hand Nipper, for this kit is perfect to Flex it...
I need this I want to go to japan directly