We developed and use these in Illinois where we also get a lot of snow. Weather is no issue for these stickers as they are rated for 7+ years in outdoor conditions. You've got nothing to worry about!
Neat idea...so, those decals you provided are suppose to last the lifetime of the car and keep rain out of the hatch? Wouldn't it be better to supply some rubber plugs to place in those holes that aren't used?
Easy install and looks great! Would have been installed in 30 min by myself but had a Ford hiccup. At first I thought the price was a little steep but after taking in the R&D into consideration and seeing the quality when they arrived I was more than satisfied. The only problem I had was a cross threaded main wing bolt but that was Ford's fault and not Boomba's at all! I actually took a bolt off my STi to fasten my risers lol. Great product guys!!!
+Jake Gimigliano Repurposing bolts from a Subaru lol. Glad to hear you got everything on without too much trouble! We really like to put our best foot forward when it comes to the quality of our products!
Hello! No, it is not necessary to create new threads as our provided hardware bolts in directly to the risers and the risers reuse the stock mounting points! Let us know if you have any more questions!
@@BoombaRacing Thanks for the reply! In my case, the thinner, pointy bolts don't fit anywhere on my spoiler, it fits the set piece well, but not the car part!
Once the spoiler has been lifted with the brake cable and washer cable through, what happens to the two large holes that the wires go through? As they are pretty exposed to rain?!
Those holes do remain open, however due to the aerodynamics, it has never proven to be an issue with all of the kits we've sold. If it really does cause for concern, you can always seal the holes with electrical tape as well.
These pieces are highly tested, machined from billet aluminum, and completely weather tight. This is a much more complete solution rather than going to Home Depot for some washers.
Eh, not everyone is into poorly engineered and copied chinese knock-offs. Most people are willing to pay for made in the USA quality, but hey you do you!
Thanks for the video. It made the installation straightforward and saved me lots of time. Love the risers and the look.
+Kevin Lew Thanks for the support! Glad to hear you are happy with the product.
if I dropped the bolt down the hatch, how would I get the bolt out?
Love the standard windows song ❤️
anyone know where I can find both of the two front bolts
I like this kit. What wheels are those on the car? I have the same orange ST and I think those wheels would look good on my car.
They are Sparco Assetto Gara's, We think they look pretty good on this car!
will your stickers secure my hatch from heavy snow ? where i live snow is a big issue. Thanks
We developed and use these in Illinois where we also get a lot of snow. Weather is no issue for these stickers as they are rated for 7+ years in outdoor conditions. You've got nothing to worry about!
Neat idea...so, those decals you provided are suppose to last the lifetime of the car and keep rain out of the hatch? Wouldn't it be better to supply some rubber plugs to place in those holes that aren't used?
The provided decals are 7-10 year rated vinyl. As long as they are applied on a clean surface, they should have no issues!
Would these risers fit on a Mk7 Fiesta Zetec S or are they designed to only fit a Mk7 Fiesta ST?
They work on the regular Zetec as well as the ST. These will work on any MK7 Fiesta.
Would these fit a Ford Fiesta titanium 2010 with the added spoiler?
dont see why not. Thats what a return policy is for eh?
Easy install and looks great! Would have been installed in 30 min by myself but had a Ford hiccup. At first I thought the price was a little steep but after taking in the R&D into consideration and seeing the quality when they arrived I was more than satisfied. The only problem I had was a cross threaded main wing bolt but that was Ford's fault and not Boomba's at all! I actually took a bolt off my STi to fasten my risers lol. Great product guys!!!
+Jake Gimigliano Repurposing bolts from a Subaru lol. Glad to hear you got everything on without too much trouble! We really like to put our best foot forward when it comes to the quality of our products!
Will this fit the 2013 fiesta st? All the kits I see on eBay are 2014-up
America never got a 2013 Fiesta ST. They were all 2014+. These will also fit non-ST so if you have a 2013 Fiesta, it should work!
BoombaRacingInc does this fit the Europeans fiestas?
Yes our wing risers will fit European Fiestas.
Would it fot a mk7.5 st-line? (2017 gen)
Hello! Yes it would!!!
but on a mk7 fiesta zetec the brake wire is shorter, how can i conect it?
If the wiring harness does not reach, you will have to extend it.
Although we have people running these on non-ST Fiestas and this has never been an issue in the past.
Is it necessary to make the thread for the thinner screws?
Hello! No, it is not necessary to create new threads as our provided hardware bolts in directly to the risers and the risers reuse the stock mounting points! Let us know if you have any more questions!
@@BoombaRacing Thanks for the reply! In my case, the thinner, pointy bolts don't fit anywhere on my spoiler, it fits the set piece well, but not the car part!
@@RafaelTrog Hi! Just confirming what is the year of your vehicle and do you have an ST trim?
Once the spoiler has been lifted with the brake cable and washer cable through, what happens to the two large holes that the wires go through? As they are pretty exposed to rain?!
Those holes do remain open, however due to the aerodynamics, it has never proven to be an issue with all of the kits we've sold. If it really does cause for concern, you can always seal the holes with electrical tape as well.
BoombaRacingInc
Ok mate. Thanks v much for the quick response. Also, what type of material is used for the raisers?
Our risers are made of aircraft grade 6061 billet aluminum.
cut the antenna tho.. ouch
Most guys skip that step and just opt to get a stubby antenna.
150$?
OMG
These pieces are highly tested, machined from billet aluminum, and completely weather tight. This is a much more complete solution rather than going to Home Depot for some washers.
Agreed.
Yes. The market for the Fiesta is small. You've got to eat that production cost for all Fiesta parts.
😶148$... VS 36$ in banggod
Eh, not everyone is into poorly engineered and copied chinese knock-offs. Most people are willing to pay for made in the USA quality, but hey you do you!
stickers, a lot of engineering went into that. what a joke!
It is high strength adhesive 7+ year vinyl meant for outdoor use. If you put these on a clean surface, they aren't going anywhere.
I fell asleep....
That won't happen with any of our new videos!
stickers, a lot of engineering went into that. what a joke!
It is high strength adhesive 7+ year vinyl meant for outdoor use. If you put these on a clean surface, they aren't going anywhere.