How to Fix Meta Quest 3 Controller Thumbstick Drift
HTML-код
- Опубликовано: 13 окт 2024
- Here is how to fix your Meta Quest 3 controller if the thumb-stick if it's drifting or not working as it should. I will show you how to clean it inside out to fix this problem.
↓↓Amazon links↓↓
►Meta Quest 3 128GB: amzn.to/3RUcGtL
►Meta Quest 3 Elite Strap: amzn.to/3FdVwjw
►Meta Quest 3 Charging Dock: amzn.to/46Jjjn3
►Meta Quest Active Straps: amzn.to/46ObpJb
►Meta Quest 3 Elite Strap with Battery: amzn.to/3rULY9P
►Meta Quest 3 Silicone Facial Interface: amzn.to/48HFbRH
►Duracell Coppertop AA Batteries: amzn.to/48QwaFK
►WD-40 Specialist Contact Cleaner: amzn.to/3Qxlzrd
►Dust-Off Disposable Compressed Gas Duster: amzn.to/3Fwkhra
► 99% Isopropyl Alcohol Bottle: amzn.to/3s9JYe6
The Amazon links above are affiliate, which means that I may get a small commission from them if you decide to buy something on their website. This is to support this channel :)
Don't forget to like and subscribe if this was useful to you!
Thanks man, i couldn’t figure out how to put my joystick back in after taking it out, such a life saver
Yeah i had the same problem but a simple tilt fixed
Thanks, you saved me from a lot of anxiety, when I checked controller calibration in settings it was jumping around as crazy. Few minutes and contact cleaner spray and it works like a charm!
I love how you say adhesive as "Uh-Diz-Iv"
I was playing a game and hit off the thumb stick and I was terrified since I thought I couldn’t put it back on but I saw this and it help! Thank you so much!
Not quite 2 months since launch, but my left controller has stick drift now. Thanks for the video.
Yeah. Uh try to blow air into the joystick while holding it down then do the same but while holding it up. Worked for me 👀
Wow, this works great! I just squirted the contact cleaner into a small bowl, picked it up with a dropper and dropped a few drops into the joystick area.
My left analog stick is not really drifting but when i realease it make tiny movement by itself in the game, like stuttering a bit and its super annoying. Like in a game your character move forward, you release the stick and it still make 1 or two tiny movements in that direction like micro stuttering. Is this also the drift problem?
Thank you! i didn't have drift but the joystick had come off and i didn't know how to reattach it. this was super helpful!
I had major stick drift. But blowing air into the joystick while holding it down fixed that. Works like new now!
Tysm mate
TYSM YOU SAVED MEEEEE
Thank you so much my drumstick fell off and you helped me thank you ❤️
you do not find many of such usefull guides. Thx a lot
Thank you so much man, i was having trouble with stick drift, and the menu button, and I play Rec Room a lot, so this helped out a lot
Hey there sir! I gatta say, it worked. I used 91% and a q tip to scrub the metal while rotating the stick to get deeper. Also the vacuum did work hahahaha
Great thorough video!
I was so scared because my joystick wasn’t fitting in but now that you show me how I’m so thankful. Thank you I was gonna cry.
I still cant get mine in
Do you break warranty when opening the Controller? Could Meta even recognize it?
You saved me 1000 dollars from being wasted my controllers analog stick popped out am you saved it❤❤❤❤❤❤ new sub
1000? the headset isnt even a year old so you still have warranty on it
@@baldfloppa394 yea I just figured that out🤦
WARNING: Those white rectangles you see around the controller are small chips placed on a black tape (I have no idea what their purpose is). The tape itself on those rectangle extrusions that have the chips on them are not stuck to the controller. So if you take a thin tool, like I did with a guitar pick, and force it inside the tape could be turned backwards and torn apart! Needless to say you shouldn't do this. Thankfully I only bend them on my controller and by bending them back in their place it works just fine. Use a hard plastic tool like he did, work around the edge and not deep inside and above all take your time. The adhesive is very tough to come unstuck.
Thank you so much to fix my controller. I will turn on notifications.🎉🎉🎉
Thanks ,is very clear explained
Well, I think it's better to send your quest for replacement, quest 3 is not even year old, so everyone should still have warranty. At least in Europe with 2 years warranty standard.
3 generation and meta still hasn't fix this, playstation and xbox controllers can last longer than the quest before controller drift appears.
Show me a controller that does not get drift lol
Even flight ones for hundreds eventually go
49
@@mattmmilli8287these controllers take atleast 2 months before stick drift, xbox and playstation take atleast 6 months before a slight amount, and thats if you dont keep it clean.
@@mattmmilli8287 PS3 controllers, never seen it happen to em
doesn't work in my house. I did everything the video shows and it's even worse. I requested an exchange from Meta but if they notice that I opened the hood I don't know if they will exchange it for free. Pay attention to the warranty! Do you think Meta closes her eyes if we remove the hood like in the video? THANKS
Would a hot hair blower help with adhesives?
My stick doesn’t have drift but it does jitter when I push to the edge. I’m hoping I need to clean it, but I keep it in my case when not in use.
expensive af headset with the latest tech, no dust prevention for joystick... my 5-6 yo steam controller joystick still works flawlessly today and I use it a lot, leave it in the open collecting dust etc and not a single problem. bought quest 3 6 months ago and having drift for the past month too scared to break it trying this...
I recently bought quest 3. I noticed that something was rattling under the thumbstick of the right controller. I thought it was a spring, but when I disassembled it, it didn't come true. Wondering who has encountered this, and if there is a way to fix it.
p.s. this was also noticed on quest 2.
I had a good controller for a few months, but then it broke down and i used my warrenty to replace the controllers, 3 times in a row iv had to return to bestbuy to replace controllers that had stick drift straight out of the [CENSOR] box, i refuse to go again so i hope this video works
can you fix loose joysticks
my quest no longer picks up my controller now...
same
First replace battery then try pairing controller to the headset again
so.. this is kind of my own dumb fault, but... don't do the last step in this video if you're not a professional at fixing tech stuff. it's REALLY easy to break stuff while trying to pry it open. also, it voids your warranty and the possibility to send the controller in for RMA.
also, video maker, please add a warning inside the video about how it voids your warranty?
what angle???
It worked! Just alcohol and blowing with a straw.
How?
Take cover off,squirt wd40 specialist contact cleaner in around the joystick,wiggle joystick,put cover back on,job done
I can't find what video I'm looking for but my controllers will want to make control cyclist just started randomly activating the clicking button you know when you're trying to click on something to like open it up or play it that happens randomly and it's like really annoying does anyone know how to fix that That's the best way I can explain it so sorry if it makes no sense
I think an old credit card could also be used as a pry tool
Once i set the cap on, the sensitivity spring on the left of the buttons stays in contact with the controller cap and it thinks that im holding my finger there, it does not give issues but it’s frustrating to see can someone help how to fix it ?
WORKS TYSMMM I LOVE YOU
my joystick is not turning at all do you know how to fix that?
You should warn about the LEDs around the border of the top plate which you can easily destroy when opening it with that tool! 😬
My thumbstick keeps locking up when i put it in properly
Thank you so much❤❤❤
My controller faceplate didn't stick right, after i took it off the edges didn't stay down
Thank you!!
it isnt always something being in the joystick, these sticks only last so long. there are replacements online,
Can you not put a vavacuum cleaner on it ? And suck all debris out
Bro please help me please my thumbs ticket won't go on my controller after removing it please help
It fits very tightly, try force down and tuck the sides in with a blunt object, like a sharpie marker
@dennislinden3657 I did it 2 weeks ago but I still have stick drift
thanks
You don’t have to remove the joystick though it will move enough to get some wd40 contact cleaner in there
Thanks - helpful
Thanks
Thxsm
Nope, it doesn't work. Seems that I have to change the controller itself, like I had to do two years ago with my Quest2.
after doing this, my x and y buttons are now stuck in a pressed position
7:14 simply put in the angle... Brother it's not that simple as it looks, took me like 10 minutes
Spit on the thumbstick and wiggle it around.
could not get the top off ):
It's like impossible to put the assembly and thumb stick back on wtf.
Real
by the way my thumbstick is so broken its split in half because i hit it off my wall when playing gtag
edit: the whole thumbstick has came off.
You, guys, have to be careful when prying the cover. The sensor LEDs are on the rim.
Everybody is having issues
Bro this did not work at all 🤣🤣 definetily not subscribing ima just take it into a best buy or smth
This system just came out and the controller had stick drift lmaooo will not be buying
They don’t get sold already full of dust and skin cells you absolute muppet
It's not the controllers fault stupid every game controller has issues like this it just happens
it's not the system, it's just small objects get stuck into the controller or the controller is damaged somehow
You still brought it didn't you 😂
Sounds like you can’t afford it