Most like this don't have the money. They max out their credit cards and they are in debt up to their necks, don't let them fool you! They live for show!
I got a 22 f250 just like yours. Bought it already lifted with King shocks. The truck is a beast. Looking to do a horn project like this. Glad you showed the aux switch usage. 5 and 6 are always hot unlike 1-4 that are linked to the ignition being switched on first.
the higher they are mounted - the louder they are - he should have put them on top - but then - guess he never gets off road - even with his good lookin lift -- ahahahahahaha
I’m not a Ford guy, but that is a sharp rig! I have a Power Wagon that I am considering this horn kit for, from the same company too, and I think I am sold! Well done!
Sweet install and setup. Just got one question. For the compressors, do you have to where the compressors kick off after they reach 165PSI even with the switch on? Or does the switch bypass the sensor and just run continuously until your turn the switch off?
A guy down the street just bought a F-450, that was owned by the nearby Ford service big-wig, and it has LOUD air horns! Three quarters of a mile away, it sounds loud!!
Do you have a mock up or a better picture of the bracket you used? I have the same truck and am finding it hard to fit everything. Or who made the bracket?
Hi Jeremy, Thanks for the video. I'm going to install the K3LA. Who did your install. I'm in Tx as well and will probably need to fabricate the hanger like you did as well. Thanks.
I ran the actual valve on mine, used in the floor of the Peterbilts. Yes i drilled a hole in the floor of my F250 lol that's how bad I wanted the authentic train sound
Did you do the install? Just wondering if you had any diagrams of the wiring to the auxiliary switches. I have a 2019 f150 Raptor. I'm gonna do the same system when I get back next week..
I use to have an old school Gazooga horn like they have on old cars which was funny and loud but I had it on my 65 Fairlane so it made sense but this would be awesome.
Awesome Truck I have been in the market for an F350 and you can not find anything over an F150 it seems. I will just be jelly of yours till I can find one haha
I'm wondering if train horns are louder than a fire engine horn. I used to live up the street from a fire station and those were painful to my ears. I had to cover my ears when they came by.
I was at a Green Light, making a left turn. I did not like waiting por/pour on comming trafic! To the other vihicles I did not apprciate waiting por/pour them so I kept the horn going. That was a Boo Boo, I damaged the horn! Can the horns in this vidio be damaged from over use?
i got dual compressors and and 8 gallon tank as well with air bags and a nathan airchime P3, i have zero leaks in air system i can leave the truck sitting for weeks and zero air leaks. if you get everything setup up perfectly you shouldnt have any leaks either
awesome truck and love the set up!! Just ordered a f250 lariat (big step for me). Coming from a Tundra and looking forward to all the creature comforts from Ford. I have had air horns for years and love them! Nice that you didn’t have to remove spare tire. Do you have the pet number for the system you purchased?
Trust me bro I went from a tundra to an F350 dually and couldn’t be happier you’ll love your new ford and with a nice lift and new shoes you’ll feel like the kind of the road especially with a new train horn
@@Jeremyparker7 how much did they charge to make you the bracket? I also wonder if they can make me one and ship it to me. I have the same exact truck. Also have a set of Nathan K3LAs and want to mount them.
Thanks for the reply, I have the same ones and have Falken Wildpeak AT3 37's being installed on them Monday. I do not have a lift, only a level, very interested in seing your color matched parts when you get them installed. Thanks for the video's!!!!!
I came here because I was wanting to find videos of that super awesome train horn owner who is rocking downtown Ottawa, Canada with massive and sustained train horn blasts all day long as part of the pro-freedom protests. I gotta say this is a nice ass truck you got there & I’m even a truck kind of guy.
I have a 2020 f350 and would like to mount my horns about the same location as yours. Who made your mount? Great idea mounting the tank and pumps under the roll and lock .
This is the kind of horn I want installed on my truck but in a rear firing position for those idiots behind me who honk their horn for no reason whatsoever.
Talk about those horns being loud... Unlike other stuff on the market, nathan horns are used by real trains, the K3LA is a very common one at large, so of course they are loud. That one you have may have come off a real locomotive!
Good to see somebody out there who still has some money.
Must be nice
💸💸
You must be doing something wrong lol
Most like this don't have the money. They max out their credit cards and they are in debt up to their necks, don't let them fool you! They live for show!
@@explod329 Ah. So THAT’S what I’m doing wrong 😂
Bro. The quick connect in the fuel door is so sick! Looks clean AF
I got a 22 f250 just like yours. Bought it already lifted with King shocks. The truck is a beast. Looking to do a horn project like this. Glad you showed the aux switch usage. 5 and 6 are always hot unlike 1-4 that are linked to the ignition being switched on first.
what do you do for a living?
I had to stop for a second and appreciate you're truck, nice vehicle
That truck is absolutely beautiful and oh my God those train horns are absolutely amazing. Also, I love the 4K quality
And how do you know the quality?
Just guessing
Sweet truck and those horns are awesome.
You should hear them on the Union Pacific! Their SD70Ms, AC4400CWs, SD40-2s, and GP40-2s have K3LAs. The SD70ACes with their K5LLAs are loud, too.
the higher they are mounted - the louder they are - he should have put them on top - but then - guess he never gets off road - even with his good lookin lift -- ahahahahahaha
I really love how you added a quick connect for air. Great setup!
I’m not a Ford guy, but that is a sharp rig! I have a Power Wagon that I am considering this horn kit for, from the same company too, and I think I am sold! Well done!
2015 power wagon here. Looking to get the k5la kit
Put the quick connect behind the taillight that's how I have mine ran in all my trucks and it's bulletproof
I would much rather have a truck over a wagon
He knew what he was doing mounting the horns to face the sidewalk, he's gonna be scaring people left to right 🤣🤣
Thank God for Texas! This is beautiful!
Yes sir, Jason and his team are awesome!
The nathan M5 is actually the loudest but it’s more of a vintage horn now, you can probably get a K5LA or K5LLA and those are loud too
That's a good idea to have an auxiliary quick connect for air.
Sweet install and setup. Just got one question. For the compressors, do you have to where the compressors kick off after they reach 165PSI even with the switch on? Or does the switch bypass the sensor and just run continuously until your turn the switch off?
Can you make a video covering cost of ownership?
I love your air set up 👍🏽 I need same on my truck
You should go to a railroad crossing and blow the horn when the train is going by to see how loud it is compared to a real train.
You can put rubber groumets on both sides to make the vibration not loud
A guy down the street just bought a F-450, that was owned by the nearby Ford service big-wig, and it has LOUD air horns! Three quarters of a mile away, it sounds loud!!
I have a 2024 F250 6.7 HO Tremor. I need this NOW
Nathan K3LA is no joke. Nice show and tell vid.
Do you have a mock up or a better picture of the bracket you used? I have the same truck and am finding it hard to fit everything. Or who made the bracket?
Hi Jeremy, Thanks for the video. I'm going to install the K3LA. Who did your install. I'm in Tx as well and will probably need to fabricate the hanger like you did as well. Thanks.
I ran the actual valve on mine, used in the floor of the Peterbilts. Yes i drilled a hole in the floor of my F250 lol that's how bad I wanted the authentic train sound
Can you tell me who made that bracket? I’d like to have it made and shipped to me if possible
Tom's 4x4 Chattanooga Tn.
Beautiful set-up!
How do I go about finding the horn mounting bracket? 🙏
I need this! So dope!
Loud! I like Nathan K5LA or K5HA train horn. My future trucks Chevy Duramax and gm Duramax
Nice Ford F-250 truck, that my dad want it
Did you do the install? Just wondering if you had any diagrams of the wiring to the auxiliary switches. I have a 2019 f150 Raptor. I'm gonna do the same system when I get back next week..
No, I had it done. But that diagram should be easily accessible
I use to have an old school Gazooga horn like they have on old cars which was funny and loud but I had it on my 65 Fairlane so it made sense but this would be awesome.
Awesome Truck I have been in the market for an F350 and you can not find anything over an F150 it seems. I will just be jelly of yours till I can find one haha
Have you used dynmat in the truck? That's usually the first thing I do to a vehicle. I would definitely do it before installing a train horn.
Did they just drill a hole in your bed to run the airlines down through? I just got this kit today
I'm wondering if train horns are louder than a fire engine horn. I used to live up the street from a fire station and those were painful to my ears. I had to cover my ears when they came by.
Probably they have two horns a train has 5 bells
I was at a Green Light, making a left turn. I did not like waiting por/pour on comming trafic! To the other vihicles I did not apprciate waiting por/pour them so I kept the horn going. That was a Boo Boo, I damaged the horn! Can the horns in this vidio be damaged from over use?
i got dual compressors and and 8 gallon tank as well with air bags and a nathan airchime P3, i have zero leaks in air system i can leave the truck sitting for weeks and zero air leaks. if you get everything setup up perfectly you shouldnt have any leaks either
whats the trick?
awesome truck and love the set up!! Just ordered a f250 lariat (big step for me). Coming from a Tundra and looking forward to all the creature comforts from Ford. I have had air horns for years and love them! Nice that you didn’t have to remove spare tire. Do you have the pet number for the system you purchased?
I don’t have the part number but if you give those guys a call they can get you the same thing. Tell them you want Jeremy's new set up
Trust me bro I went from a tundra to an F350 dually and couldn’t be happier you’ll love your new ford and with a nice lift and new shoes you’ll feel like the kind of the road especially with a new train horn
👍👍 what size lift did you do again?
@@TundraTalk76 4.5
👍
cant wait to put this on my TRX lets gooooooo
What air system is in your truck
Nice truck Jeremy, stay safe sir
Thanks 👍
Hell ya! Wish I had one so many times.
I'm tempted 🤙
Awesome video.
HI!! I have the same truck and horns, I just need the mounting bracket for the horns. Where did you get it made?
Tom’s 4x4 in Chattanooga fabricated it.
@@Jeremyparker7 how much did they charge to make you the bracket? I also wonder if they can make me one and ship it to me. I have the same exact truck. Also have a set of Nathan K3LAs and want to mount them.
What type of bed cover is that?
Jeremy, I see you swapped out the Fuel Siege rims, was that just for aesthetics or did something fail or happen to them?
I liked them just didn't love them lol
Thanks for the reply, I have the same ones and have Falken Wildpeak AT3 37's being installed on them Monday. I do not have a lift, only a level, very interested in seing your color matched parts when you get them installed. Thanks for the video's!!!!!
There used to be a guy in Dodge City KS who had a set of air whistles way more interesting than your horns
I came here because I was wanting to find videos of that super awesome train horn owner who is rocking downtown Ottawa, Canada with massive and sustained train horn blasts all day long as part of the pro-freedom protests.
I gotta say this is a nice ass truck you got there & I’m even a truck kind of guy.
best time ever. everyone loved it. evil government tries as hard as they could to make it look bad but failed.
Where did you have it installed
How would that work for people blocking a freeway?
Scare them a wee bit
These sound amazing. How big did you say the compressors are?
580
Can you do a video of the best horn that is Electric and dont nead an air tank
Can you get a ticket using that horn? I will check with Air Horn of TX..
Don’t blow it at the Cops and you’ll be fine.
THAT IS AWESOME!!!!!!!!!
I have a 2020 f350 and would like to mount my horns about the same location as yours. Who made your mount? Great idea mounting the tank and pumps under the roll and lock .
The company that did the work fabricated the mount.
You need a Nathan k5LA horn. Now that’s loud
Can these be hooked up to a semis air tank ?
I love the color
im restoring/ fixing up my 1989 3/4 ton GMC 4x4 i want a crazy loud ass horn im going all out lift custom interior paint engine rebuild you name it
Subbed and liked. Thanks man.
Beautiful truck just the way it is
Nice nice... Need something way more agressive, loudness would be fine with what ya got
Excellent.
Wtf!!! I love it!
🔥🔥🔥🔥
love it
How much trouble would one of these get me into in California.?
well it'd give you cancer out there
As a Californian, unfortunately too much as we can't do shit to our cars lol
Awesome truck!! I always loved FORD!
Get that truck upto Ottowa
Need this for my semi my air horn is embarrassing lmbo
Imagine running up to a group of plebs and sounding this thing off.
NOW THATS A HORN!!
What’s the msrp on that?
I want that
They’re gonna be loud when they’re one of the most commonly used horns used by US Class 1 railroads (after the Nathan K5LA of course)💀
That horn is offensively loud…
God Bless America!!
not the loudest yet, i challenge you ith the k5ca-ls in emergancy mode at a staggering 152db at 10ft
Hillbilly version of a subwoofer?
This is the kind of horn I want installed on my truck but in a rear firing position for those idiots behind me who honk their horn for no reason whatsoever.
The compressor alone is louder than my horn.
You do or have some great work done. Jelly. Hook me up with your connections. 😊
Legal?
Super jelly not going to lie.
hahaha love it!
Damn, son! That horn got me hot and bothered! I might have to get one of those!
I hope this is loud enough to make the cow clear the road
@ 5:00 you can hear it your welcome
Get one for a bicycle a train horn
Talk about those horns being loud... Unlike other stuff on the market, nathan horns are used by real trains, the K3LA is a very common one at large, so of course they are loud. That one you have may have come off a real locomotive!
TALK LET A GROWN UP. the last tank you done?!?!?! LOL
4:53 is the moment your öppning for👀📯
Dude why not let us hear it up close? It sounds regular
300' away? I bet you tell the women you have a foot long too! lol.
I will just take it your probably drunk and have know idea what your talking about 😂
@@Jeremyparker7 LMAO. Not tonight!
When doing the search on Google it pops up with all kinds of BS. 😢 Guess I need to call them up.
Fast fwd 5:00
The k3 are loud but not the loudest.
Dear Lord, whyy??