Those are great mods for a great gun. Best 1322 pump handle ever. If I could have only one multi-pump .22 cal air pistol for the Zombie Apocalypse, it would be one with a pump handle like this.
Good video. I was trying to check your Amazon link about shoulder stock, but I think they don't have it any more. Amazon sell the stock and the pistol together. I already has the pistol
Hey! Love your ideas. Have you considered printing the stock multiple parts and having a connector or screw and nuts holes piecing them together? Im thinking of trying my first foray into model creation. If you’re not going to do it, I will.
Yeah I had the sme idea for a handle ….exact same concept but I’m an artist at heart and the bulk of it reduced the aesthetics of the gun so I decided to come up with a sleeker design .the result was more like a horn in a sense …hard to describe but basically a rounded L shape cool video
On the dove tail mount what did you have to sand off. I did not understand that very clearly. I found the link for the dovetail and it is much less costly and the clevercraft bracket assembly for sure. Thanks for the great video and links.
The front clamping bolt on this sight is poorly located. I had to sand a chamfer on the front edge of the dovetail to make room for that bolt. If you have a friend with a 3D printer, you could make a dovetail in just a couple hours. There's a link to the files in the description.
@@WildmanTech Thank you so much for the info. This video is awesome the more I watch it. I guess on a real picatinny mount there are grooves where I guess that bolt would have fit into so sanding of that dove tail I guess let the bolt go through to the other side of the other half to bolt on tightly. Is that correct? Your talent at making this 3D stuff is amazing. I just love that pump handle.
@@f1948s Not really. The issue is this particular sight manufacture decided to pass one of the clamping bolts right through the center of the dovetail. The hole for the clamping bolt should actually be above the dovetail. This one is not.
@@WildmanTech Thanks for explaining. Hopefully I will not run into that issue. I like the sight and will be buying one. Hopefully I will not have that issue. Since I do not have a 3d machine can you tell me what mount unit you initially purchased? Since the barrel on this pistol has an OD of 11mm I have not found a mount that will close to that diameter. About the closest I can find is one that closes or clamps down to about 17mm. I am not sure if I put cork between the barrel and the clamp mount that it will be tight enough to hold the mount firmly. Any suggestions or do you think the cork will work? Thanks.
@@f1948s I’d reach out to friends or your local library to 3D print those parts. How will you get the pump handle otherwise? You can buy the mount here. amzn.to/3or1jK4
Hello, I want to print the grip, and I noticed your model only has pins and no screws on the pump arm. , mine has screws on the pump and i see the roll pin holes arent recessed with the phillips screw on the pump arm file? can someone please do an edit to the grip file he provided? Or is the file working as is and no need? Has anyone printed the grip and installed with factory phillips screw?
I put the Picatinny rail with scope mounts but do not seem to be able to get the scope adjusted for elevation. It seems it still shoots over 4.5" low after adjusting the elevation turret by 40 clicks. Just not sure if this scope I took off a pellet rifle will work on this pistol. Any advice?
Can I buy your custom parts ? I don’t have a 3d printer or computer even .. no internet either .. my landlord doesn’t allow internet 😔 all I have is my phone . I want a chipmunk elephant gun. Should I get the 1322 or 1377. Can you help me ?
As a general rule of thumb, .177 for feathers and .22 for the furs. But what ammo you could easily come by is more important. Don't struggle with your desire. Good luck.
@@masterful6602 Sights... Red dot, laser scope, iron sights are all good to go. The laser dot won't interfere nor scare away your target. Squirrel hunting with laser scope, skip to middle for action: ruclips.net/video/3HAdownMvzI/видео.html
I wouldn't mind buying one of them pump handles from you I really like that I'm like you I'm an older gentleman and yeah they do pinch your fingers so if you're interested in making one and selling it let me know .oldgeorge
Wildman thank you I thought I'd ask was I really like the way you made that if you ever decide to make and sell them and you could charge for your time and your material your setup time and your material so if you do post it and let me know brother I'll be more than happy to buy one from you God bless have a super weekend Labor Day barbecue
That charging handle is awesome!!
Those are great mods for a great gun. Best 1322 pump handle ever. If I could have only one multi-pump .22 cal air pistol for the Zombie Apocalypse, it would be one with a pump handle like this.
You could make some petty cash selling like Buckrail. Thanks for sharing the 3d files btw.
I don’t have time to sell things, but thanks.
Good video. I was trying to check your Amazon link about shoulder stock, but I think they don't have it any more. Amazon sell the stock and the pistol together. I already has the pistol
I updated the link. You can buy it direct from Crosman. www.crosman.com/product/crosman-shoulder-stock
Nice video and design. CAD and 3D printing to the rescue! Mahalo for sharing! : )
Beautiful, love the attention to ergonomics
The handle looks like you could modify it further with two rails at the front to attach bipod legs on either side.
Hey! Love your ideas. Have you considered printing the stock multiple parts and having a connector or screw and nuts holes piecing them together? Im thinking of trying my first foray into model creation. If you’re not going to do it, I will.
I did, but the stock is so cheap I didn’t feel it was worth it.
next level skills on everything , sub earned
I wish I had a 3D printer now. I would love to have that forearm grip
You could have one tomorrow. Or your local library probably has one you can use. amzn.to/47j3EeY
There’s a link to all the files so you can 3d print your own. If you don't have a 3d printer, www.jinxbot.com will do it and ship it to you.
Thanks a bunch, I will look into it@@WildmanTech
Very nice modifications! If no one else has claimed your original handles and pump grip I would take them. I messaged you on your Facebook messenger.
Doobaly Doo below 😂 man that cracked me up. Great video and you are quite talented!
I’ve been on RUclips for a long time and the description section is officially named the “dooblydo”
I often varmint hunt your mods will make my sweeps much easier. Thanks. Coffee farm in Puerto Rico means rats and boas
Do you sell the pump handle os provide a plan in pdf ro make one for those that don’t have 3 d ptintrers
The CAD model for the handle is in the description. Your local library has 3D printers.
There’s a link to all the files so you can 3d print your own. If you don't have a 3d printer, www.jinxbot.com will do it and ship it to you.
Thats nice, I want one. You should build more like the one you did and sell them online.
There’s a link to all the files so you can 3d print your own.
There’s a link to all the files so you can 3d print your own. If you don't have a 3d printer, www.jinxbot.com will do it and ship it to you.
Looks good!
Badass work buddy 💪👍
Have try to pump handle out of hard wood like walnut or oak
Very nice mods and thank you very much for the files :) I wonder if do you have plans to upgrade the hand grips for a wider ones?
The grip is built onto the shoulder stock, so no.
@@WildmanTech I see thank you very much you should make more videos with more upgrades for air guns you are very good :), cheers
Yeah I had the sme idea for a handle ….exact same concept but I’m an artist at heart and the bulk of it reduced the aesthetics of the gun so I decided to come up with a sleeker design .the result was more like a horn in a sense …hard to describe but basically a rounded L shape cool video
Thanks for the file, it is on my printer right now. Can you tell me what are the sizes of the Holiing pins you used?
I don’t know. They’re the original ones
On the dove tail mount what did you have to sand off. I did not understand that very clearly. I found the link for the dovetail and it is much less costly and the clevercraft bracket assembly for sure. Thanks for the great video and links.
The front clamping bolt on this sight is poorly located. I had to sand a chamfer on the front edge of the dovetail to make room for that bolt. If you have a friend with a 3D printer, you could make a dovetail in just a couple hours. There's a link to the files in the description.
@@WildmanTech Thank you so much for the info. This video is awesome the more I watch it. I guess on a real picatinny mount there are grooves where I guess that bolt would have fit into so sanding of that dove tail I guess let the bolt go through to the other side of the other half to bolt on tightly. Is that correct? Your talent at making this 3D stuff is amazing. I just love that pump handle.
@@f1948s Not really. The issue is this particular sight manufacture decided to pass one of the clamping bolts right through the center of the dovetail. The hole for the clamping bolt should actually be above the dovetail. This one is not.
@@WildmanTech Thanks for explaining. Hopefully I will not run into that issue. I like the sight and will be buying one. Hopefully I will not have that issue. Since I do not have a 3d machine can you tell me what mount unit you initially purchased? Since the barrel on this pistol has an OD of 11mm I have not found a mount that will close to that diameter. About the closest I can find is one that closes or clamps down to about 17mm. I am not sure if I put cork between the barrel and the clamp mount that it will be tight enough to hold the mount firmly. Any suggestions or do you think the cork will work? Thanks.
@@f1948s I’d reach out to friends or your local library to 3D print those parts. How will you get the pump handle otherwise? You can buy the mount here. amzn.to/3or1jK4
Nice work!
What brand is your red dot sight, and do you like it?
There’s link to it in the description.
Hey Wildman, I'm not seeing the grip/handle file. Am I missing something? Thanks, brother!
They're over on Thingiverse. It's the first link. I tried it and it appears thingiverse is down right now. Try it a little later.
I went and checked again. The files are there at the link in the description.
Hello, I want to print the grip, and I noticed your model only has pins and no screws on the pump arm. , mine has screws on the pump and i see the roll pin holes arent recessed with the phillips screw on the pump arm file? can someone please do an edit to the grip file he provided?
Or is the file working as is and no need? Has anyone printed the grip and installed with factory phillips screw?
You could just drill it out.
Is there a way to make a belt magazine for it?
Let me know if you find one.
also longer barrel and sound moderator
I put the Picatinny rail with scope mounts but do not seem to be able to get the scope adjusted for elevation. It seems it still shoots over 4.5" low after adjusting the elevation turret by 40 clicks. Just not sure if this scope I took off a pellet rifle will work on this pistol. Any advice?
My elevation adjustment took a lot to get right. Keep turning?
Nice!
Can I buy your custom parts ? I don’t have a 3d printer or computer even .. no internet either .. my landlord doesn’t allow internet 😔 all I have is my phone . I want a chipmunk elephant gun. Should I get the 1322 or 1377. Can you help me ?
I need some help on ideal sights for chipmunks, and other parts that will help make the gun strong enough to shoot them from like 20 yards .
Links to all the parts and the gun are in the description. The 1322 can easily take out a squirrel at 20 yards.
A landlord like that deserves a pellet in the head!
As a general rule of thumb, .177 for feathers and .22 for the furs. But what ammo you could easily come by is more important. Don't struggle with your desire. Good luck.
@@masterful6602 Sights... Red dot, laser scope, iron sights are all good to go. The laser dot won't interfere nor scare away your target. Squirrel hunting with laser scope, skip to middle for action:
ruclips.net/video/3HAdownMvzI/видео.html
install a 10 shot mag
Is that a thing? It’s a single shot bolt action.
👌👌👌👌👌👌👌
.... you stayed in battery, 2 😮
No idea what this comment means
you still have the handle sir?
The old one? Long gone! You can print the new one yourself though. Vastly superior to the original.
US ONLY
Says who?
Wanna sell me a custom grip and reticle mount ? /shipped to Canada....
Custom grip? The shoulder stock grip? Those and the reticle mount are readily available.
First (what do I do?)
DM me your address.
@@RpMcMurphy_ @bensonboys never sent the address so you can have it if you want it
@@RpMcMurphy_ you would need to DM me the address.
I wouldn't mind buying one of them pump handles from you I really like that I'm like you I'm an older gentleman and yeah they do pinch your fingers so if you're interested in making one and selling it let me know .oldgeorge
You can get the file for free at the link in the description, then have a friend print it. Or use Shapeways.com. I wouldn't know how to price it.
Wildman thank you I thought I'd ask was I really like the way you made that if you ever decide to make and sell them and you could charge for your time and your material your setup time and your material so if you do post it and let me know brother I'll be more than happy to buy one from you God bless have a super weekend Labor Day barbecue