1982-1993 S10 Glassrun Channel Installation
HTML-код
- Опубликовано: 12 сен 2024
- Chevy S10 glass run (window channel) weatherstrip install, 1982-1993
Precision shows you how to replace your glass run weatherstrip
Visit:
www.prp.com
Part Number: GRB 1110 82
One little tip when installing the track into the new channel run...Place the track on the outside of the run and pierce the rubber with the tabs on the track. Then when you put the track inside the channel run, the holes are already there for the tabs...and they were centered pretty good.
Thanks for the tips, installed your whole cab kit on my son's 88 s-10,after a paint job, went well, and the product is really excellent quality, better than the original equipment.
This is great! I'm doing my window run channels ans this gave me more information than I'd expected. Thanks a bunch!
Glad it helped.
oh, and it took me and a friend about 3 hours to complete the install. We did it without the special tools to remove the window crank and the door panel.
Yeah it would have been great to see the glass coming out and back in. These seem to hang on the glass clips.
Exactly. Nobody shows how the glass goes back in with the stupid clips...
@@joeking6081 I think most people leave it in cause it's such a pain in the ass to remove the glass from the door my door doesnt even have weather stripping but I promise that window ain't going nowhere XD
@@cameronvandygriff7048 what do you mean? Removing the glass is easy
@@dah_pizza_boi5965 whats your technique then cause mine must be all wrong but I first had a camaro so it didn't have a whole window frame but I just cant figure out how to easily pop it in and out cause its bigger then the hole im taking it out of and that clip that goes into the weatherstripping makes it a pain
Two 10mm bolts at window base which can be accessed by rolling the window up or down.
A plastic clip can be removed from the window base once the bolts are pulled.
Roll window 3/4 down. Grab near rear of window and tilt forward (towards truck) the plastic clips on the front and rear of window will pop right out once window is free lift out of door with the window turned down towards ground.
Wow this seems like a bear. Thanks for posting though very well detailed! Not looking forward to doing this on my S10!
i know this is 7 years late ,but you leave the window all the why down while doing this?
Yes, because the glass run needs to go down into the door. Leaving the glass down makes it easier to install this.
@@PrecisionReplacementParts thank you. I have a 91 s10 in need of both sides to be done, so when you have the time, come on over and feel free to do all of the replacements for me. Again thanx!
just sayin, , , , , oh what fun my future looks!?
Need the part number for glassrun channel
Here is a link to the product page: www.prp.com/product/detail/105535?keyword=grb%201110%2082&sort=u.Name&paginationCount=24&type=All
Where can I get new metal channels ? 1988 S10 Blazer .
Not sure if I even want to tackle replacing the window guides ...
Do you have one for the drip rail.?
Yes, you can find it here: www.prp.com/product/detail/352386?SearchType=AGR&sort=u.Name&paginationCount=24&year=1984&make=Chevrolet&model=S10&type=All
What if you need to also replace the plastic guides that are on the window?
Mike, use these window guides: www.prp.com/product/detail/104294?SearchTypekey=&keyword=windowguide&type=All
do you sell the metal channels that go inside the weatherstrip? i looked on your site and i could not find them . (for a 1993 s-10 p/u)
No, we don't sell those metal brackets.
might want to pull the window out of the mech and wipe the old greese out put new greese in the track and on roller sence that is what makes the window bind and tear the seal
I know this is very old video. I installed these on my s10 recently and I have an issue with the front part where it curves by the mirror puckers around the corner and the felt does not contact and seal the window well.
Sent an email to tech@prp.com
We'll see if we can help.
Did you remove the wiper strips before remoming the channel? it looks like on mine it has to come out first. Is there a trick to removing it?
Yes, you do have to remove them. ruclips.net/video/Q32mElyoApE/видео.html
1993 4 door s10 blazer rear door window channel available?
Sorry. It is not available.
I did this on the weekend. Did both doors. Passenger door went easy. The driver side door had a little trouble with the plastic clip that rides in the track not staying on the window. Finally got it on but the top clip catches on the edge of the new seal. I am thinking that a piece of tape over the clip will prevent the seal from trying to go under the clip and then popping the clip off.
Arent there 2 clips on the window? One at the back top and one at the front bottom?
What is the metal part you place inside the weatherstrip called? I purchased new weather strips but no metal parts came with them and my old ones are badly bent.
chuck berry Those are the glass run channel brackets and are not supplied with the aftermarket glass runs. If you need them, try finding them at a wrecking yard. They are usually in good condition, or you could go to the dealer but they will cost an arm and a leg!
They now come online with the rubber
@Michael Wishon We do not make the metal channel that attaches to the glass run weatherstrip. I don't believe anybody reproduces it. You could try car-parts.com to try and find a used one.
I still cannot remove the channel . Now my glass is rattling like crazy since I can't finish the job . I really hate GM for build quality !
Where do you get the replacement weatherstrip? Only place I have found it for a 93 s-10 is on ebay.
Lmctruck.com
@@jarhead4lyfe thanks for the info. But my truck is long gone now. Good info for someone else, I guess.
@@jbird68 yeah didn't realize till after I commented that post was from 7 years ago lol
Metal channel part number?
We do not make the metal channel, only the rubber glass run channel.
Head to a Pick n Pull or U pull it near you. You should be able to find some good ones off 90-94 years.
FYI, removing the rubber channel is ridiculous .
Good Lord Mr. bills are in an echo chamber