body measurement ಕೊಟ್ಟಾಗblouse burst point ಹೇಗೆ ಕಂಡು ಹಿಡಿಯೋದು 🤔 proffessional front part cutting.

Drafting the front part of a blouse involves several key steps. Here's a general outline to help you get started:
Materials Needed:
- Pattern paper
- Ruler
- French curve
- Pencil
- Measuring tape
Measurements Needed:
1. *Bust circumference*
2. *Waist circumference*
3. *Hip circumference*
4. *Shoulder width*
5. *Bust point (distance from shoulder to bust apex)*
6. *Bust separation (distance between bust apexes)*
7. *Neck circumference*
8. *Front length (from shoulder to waist)*
Steps to Draft the Front Part of a Blouse:
1. *Draw the Baseline:*
- Draw a vertical line to represent the center front (CF) of the blouse.
2. *Mark Key Points:*
- Mark the neckline, shoulder line, bust line, waistline, and hip line based on the measurements.
3. *Draft the Neckline:*
- From the top of the CF line, measure and mark the neckline depth and width. Use a French curve to shape the neckline.
4. *Draw the Shoulder Line:*
- From the neckline width mark, draw a line equal to half the shoulder width, sloping slightly downward to the shoulder point.
5. *Draft the Armhole:*
- From the shoulder point, drop a perpendicular line down to the bust line.
- Use the bust circumference to determine the armhole depth.
- Shape the armhole with a French curve, ensuring it’s smooth and matches the bust measurement.
6. *Create the Side Seam:*
- From the armhole, draw a line down to the waistline and hip line, matching the respective measurements.
7. *Add Dart Placement:*
- For a fitted blouse, place darts for shaping.
- Locate the bust point and draw darts from the waistline up towards the bust point, about 1-1.5 inches away from it.
8. *Shape the Waist and Hips:*
- Taper the side seam from the bust to the waistline and then slightly out to the hip line, ensuring a smooth curve.
9. *Finalize and Add Seam Allowances:*
- Add seam allowances to all edges (usually 1/2 inch).
- Mark any additional details like button placements, facing lines, or any design features.
Tips:
- **Ease**: Add ease to the bust, waist, and hip measurements for comfort.
- **Symmetry**: Ensure that both sides of the pattern are symmetrical.
- **Double-check Measurements**: Verify all measurements before cutting.
By following these steps, you can draft a well-fitted front part of a blouse. Adjustments can be made to personalize the fit and style further. #blousedesign #starfashiontec #tailoringideas

[@shruthib.mshruthi7352]

Dress sholder formaal heli kodi mam

[@ramannar8925]

Akka ede tara videos na haktiri.very useful agutte. ❤

[@khusichaya]

Very nice

[@lakshmilakshmi6249]

Good information anu mam tq so much ❤️

[@ASHAASHAp-t3r]

Nice

[@user-fy5qs2qk3h]

Mam embroidary ಮಿಷಿನ್ ಹೊಸದನ್ನ ತಗೊಂಡಿನಿ ತುಂಬಾ ದಾರ ಕಟ್ ಆಗ್ತಿದೆ. ಏನ್ ಮಾಡ್ಬೇಕು mam. ಆದ್ರೂ ಬಗ್ಗೆ ವಿಡಿಯೋ ಏನಾದ್ರು ಐಡಿಯಾ. Pls ಏನ್ ಮಾಡ್ಬೇಕು ಹೇಳಿ mam😢

[@ambika2256]

Needle cheng ಮಾಡಿ nodi

[@user-fy5qs2qk3h]

@@ambika2256 mam ಬೇರೆ needal ಹಾಕಿನೀ ಆದ್ರೂ ಸರಿ agilla

[@user-fy5qs2qk3h]

ನೋಡನ ಹೋಗ್ತಾ ಹೋಗ್ತಾ ಸರಿ ಆಗ್ಬಾವ್ದು ಅಂದ್ಕೊಂಡೆ ಆಗೇ ಆಗ್ತಿದೆ ಏನ್ ಮಾಡೋದು gottagtila