Easy DIY Smitty Sled Anyone Can Build In An Afternoon
HTML-код
- Опубликовано: 6 авг 2024
- Most ice anglers drag around flat bottomed plastic sleds loaded down with gear. But you can make ice fishing easier with a Smitty sled. This DIY Smitty sled is super easy to build with minimal materials, basic tools and it costs under a $100 to make. Plus, you can build it in a single afternoon. We even includes ideas for fully customizing your ice fishing sled!
Want to see all the upgrades we did on our Smitty sleds: Watch our new video - • Customize Your Smitty ...
Want more details on customizing your Smitty sled? Read our Smitty sled article: www.fishingduo.com/how-to-bui...
Check out our fishing blog for even more fishing tips: www.fishingduo.com - Спорт
Check out our new video showing how we customize our sleds. Get full instructions on all upgrades plus see how we used LED lights to make the ultimate sled! Watch it here: ruclips.net/video/7d-lcJr7LjU/видео.html
Use 2 x 1" pvc 4' long for pulling instead of rope. It adds way more maneuverability and no worries about being run over going downhill. Add a temp line at the handles end and use your head.
I built something similar a few years ago. I have a suggestion when tying your length of rope. My suggestion is make the rope longer so when a person pulls his sled down a hill or a small slope a person can control the sled from the back. That way the sled won't be trying to run you over. Once a person gets to the bottom they can walk in front of the sled again. I used 1x6 wood on my frame. I have an old frabil tent that I slide on top of the frame and strap it down. I liked how you made about a 6 inch clearance between the skis and the top of where you mount your tub. When there's a fresh snow that height helps with clearance. I also cut a 2x2 board that went up under where the two wood pieces meet. It helps a ton for support for when a person turns the sled in snow. It keeps it from buckling under. Put wood glue on it before screwing it together. It'll be rock solid then. Hope this helps.
Great video & very nice piece of equipment. Also helpful for all the additional comments by folks. Gotta get building me one of these.
My dad built one of these 25 yrs ago. Great sled. Still use it today. Can haul heavy loads on ice easily.
Great job on the custom sled hauler 👍🎣🇺🇸
My buddy and I built 2 Smitty sleds - so much better than pulling the Pelican.. ours can come apart to fit in the car and the pelican and gear are held on with bungee courts…. Good video..
I like the ingenuity that you put into this! Great ideas on how to expand your sleds capacity!
Thanks! It’s definitely a worthwhile project for anyone with way too much gear like us! 😉
Nice build! Great attention to precision and detail. Going out today to finish my sled. Thanks again.
Thanks! I'm glad the video helped and I hope your sled serves you well. Good luck on the ice!
Awesome! Cousin Steve (K’s dad) showed me pics of this on his phone yesterday when he was here with Stan turkey hunting (they’re back here today with Cameron)! So Paul and I are now subscribers (also to your blog).
Awesome build! Enjoyed the video
Good job! Good idea for sled.
This was a project I was planning on do last year. I even got the skies from a thrift store but never got past pulling the bindings off. Well this year we got a huge pop up but my sled isn't big enough to put the house in and carry everything needed for a family of 4 to be comfortable on the ice. This is exactly the tutorial I needed to get this project done! Excellent video I subscribed and can't wait for more videos!
That's awesome you are taking your family out ice fishing. I have no doubt that a Smitty sled will make it much easier and I'm glad you found our tutorial helpful.. Thank's for subscribing!
slick!!! Take wait to start mine!
I was pulling my gear through 8 inches on fresh snow on the ice last week, awesome sled!
Nice! Glad it worked for you.
Really good tutorial. This was really helpful with some great tips. Thanks!
Glad it was helpful!
Fishing duo great job on the video.Lots of great tips. Visually well put together. I’m subscribing😂
Glad you enjoyed it and thanks for watching!
Good quality, knowledge and communication. Like reference to options. I have subscription and refer to all my sportsmen friends
Thank you for putting out this video. I can't wait to get started on my build! 👍🏽👍🏽
Oh... New subscriber now..👊🏽
Awesome! Glad it helped. Thanks for the sub!
Nice job, thank you!
No problem. Glad you liked it!
That’s fantastic. It’s got me thinking…
Seeing how good this video is and that you have only done a few I assume you do this as a day job? I am probably wrong! Just couldn't imagine why someone would be so good at it but only make a few videos.
Dude a quick vid on how you made those rod holders would be amazing! Great video.
I just might do that. Glad you enjoyed the video!
Зачетно!
I'm going to use extruded aluminum for mine but I love this idea. My sled bottom is scratched now so it doesn't slide through snow is good as it used to! Oh, I'm assuming you put that mask on to show safety first, but quickly realized those filters do not filter spray paint fumes at all! Tried that once! 😆
I like the aluminum idea! Should make for a lighter sled. Surprisingly the mask filtered more than I expected but I still made sure to paint in a well ventilated area.👍
@@fishingduoproductions yeh, I figured, these filters should work fine. They certainly filter the paint particles, but the smell comes through!! You need the bigger organic vapor ones with the fiber filters on the outside. You can spray paint in an enclosed room and not know it smells at all!!
How are the 1 1/2 pvc mounted for the rod holders
How did you make the rod holders
where do you people live that thrift stores have used skis? we do not have many ski slopes in the midwest.
What about a place to store a thermos with soup/hot-chocolate? Do you have to wax the ski bottoms?
I always make room for a thermos with something hot but a custom thermos holder might be a future addition👍 Good idea! So far after several seasons we haven't had to wax the skis and they still glide nice on the snow.
What do you call the elastic part that holds your shovel to the side?
It's 1/4 inch shock cord. You can also buy different components for mounting it like I did.
How does it work out in deep snow/slush?
In our experience, it only sinks into slush or snow a couple inches at most and is still very easy to pull. Making sharp turns is tougher though. But all you need to do is pick up the front and pivot it. Thanks for watching!
Will a smitty sled work on dry ground
You can pull it over grass or dirt without a problem but pulling it across rough terrain (gravel, asphalt) will scratch up the skis pretty quick.
The pvc rod holders?
They are mounted to a piece of aluminum or steel flat bar with 2 pop rivets each. You can also use small machine screws and nuts. The metal is just bent so that the flat area where the PVC mounts extends past the lip of the sled. Thanks for watching!
May I suggest using Stainless screws instead of steel to prevent rusting.
Why?
@@whiteyfisk9769 Water and steel =rust.
@@Mahigeer1 99% of exterior grade screws for building arent stainless; almost all screws have a coating of some sort to mitigate that. Especially on a sled, it is a complete nonissue unless you have severe mentall illness or dont know a single thing about building, or both.
Нужно правильно разместить груз при езде по трассе, иначе будет занос
Why add th3 skiis? It is a sled. It pulls. Why the added effort and cost for little reward?
If you were to do a side by side test of a fully loaded sled without skis compared to a fully loaded sled with skis, the difference in effort is huge. Especially over slush or snow. There is significantly less drag with a Smitty sled which is why it is much easier. And if you walk a long ways the reward is not so little. The advantage is less obvious if you are pulling it on glare ice. Either way, I highly recommend you try it out sometime if you have the chance. Thanks for watching!
@@fishingduoproductions thanks for the reply. Perhaps I will give it a try!
would have been nice to see a short clip of the sled before you started the video, also why are you calling it a shmitty shled?
Are you interested in making me one and pay you for it?
The most disadvantage for this, is that u must have pickup truck to get it to the water, o just live somewhere around:)
it's not a smitty sled if it doesn't have a loo on board
That would be a shitty sled lol
If you cant take the sled off and break down the smitty... it ain't a smitty.
He said we can customize it for ourselves. I used a cheap pin system of old bolts with a pin hole drilled through the end and a large washer with the clip to secure it all together. Just unclip the 4 pins and the pan comes off and put a hinge on the struts . It all folds up and fit it the trunk. But now we have a truck so waste of time
Wish you woulda showed your auger brackett .