Bro it was great seeing the RC Plane using flight controller. Just want to know how set up the Flight mode on the transmiter for RC plane ...is it same settings as like in Drones ??
Hi bro this is vijay commented on youtube regarding apm.iam using apm 2.8 for my quad and pixhawk 2.4.8 .and iam using telemetry 448 mhz.the problem i face with these things is my telemetry is used to connect inetially but later on when i configured to programm with telemetry i lost connection with the air and ground module .and iam Presently usind bluetooth hc05 as my short range telemetry. 2 comming to pixhawk .iam using ublock 8 as my gps module and fly sky i6 as my radio and i6 b as my receiver can i auto tune using. 6 ch receiver and iam not using any ppm encorder. 3 coming to apm 2.8 How to enable external compass by soldering the tabs and having some problems with jp1 and jp2 . please replay me after seeing this message .
First question:- I'm using 433hz telemetry and i haven't faced that problem, try to connect with android tower app. 2nd question:- yes you can. 3rd question:- On the extreme right corner of apm 2.8 you will find three pins (pair of two) if you want to use internal compass then connect jumper to the first pin (on the bottom side) and if you want to use external one then connect that jumper to the third pin. In some of the flight controller boards there is inbuilt jumper that selects the internal compass automatically, position of external jumper doesn't matter there so you will need to open your board and just unsolder that point!
Yes bro you can use kk flight controller board in Rc plane but that flightcontroller doesn't have advanced features like apm2.8 You can only use stabilize mode in kk board but in apm2.8 you will find so many modes like stabilize, FBYA mode, FBYB mode, Auto launch, RTL (return to launch), circle, auto tune, Land and many more, it also has other features like you can connect a fpv camera with, it will show you the live battery voltage, current monitoring and many more features like that so I suggest you to use apm instead of kk.
Hello bro I have successfully built the drone But I am having some problems while flying the drone The drone keeeps on spinning (yawing) At first I thought one of the motor was not spinning in the right direction But all the motors are spinning diagonally clockwise and diagonally counterclockwise Then I thought it was the esc calibration problem I calibrated it more than 5 times Then I thought it wouldn’t be the esc calibration problem cause if the ESCs are not calibrated correctly Then the drone will not spin(yaw) it will either pitch up or down or roll left to right Then what is the problem???😔😔😕 Pls help bro pls…….
Bro video is very nice but he should make a detail video so that people like me will understand and trouble shoot the problem that we people are facing thats it bro please try to make a detail video.so we will understand it clearly bro .and all the very best
I also faced a lot of difficulties while working with apm2.8 but I haven't mentioned those difficulties in this video because video bhot lamba hojata. If you guys have any difficulties then you are free to ask I would like to solve your problems! You can ask me in the comment section or here is my email ID kalaskar.pd@gmail.com . . . Thanks!
some info. 1) at 3:30, S F props NOT correct for this application. 2) at 9:01, the use of VERY short pushrods is Not recommended; the use of bends in pushrods is NOT recommended. 3) at speed, the asymmetrical shape of the nose will cause a bit of nose-down moment. 4) it is not clear whether the stabs are, sufficiently, 'stiff'. 5) do you SEE that the thrust line is Wonky. in other words, in order to accommodate the (beneath-the-wing) thrust configuration, a HIGH-wing design Should have been used. 6) it appears that the profile of the main wing center section will make More Drag, while making Less lift. 7) you have converted a High-speed design (A-10; jet-powered) to be a BigFatCargo plane. 8) it appears that the use of a controller is, either, an intellectual challenge or a symptom of the pilot's LACK of piloting skills. googletranslate
Thanks for posting, I appreciate your comment. My main motto behind installing the controller is to make flight a little bit easier for the beginners! One can also do long range fpv and mission planning with the help of controller.
@@prathameshkalaskar9250 sorry. your stated motive is. NOT LOGICAL. can You see WHY that is so. btw, 'if you don't have something Intelligent to say, DON'T TYPE ANYTHING.' because, i am a lot smarter than your fellow hobbyist.
@@creativevishu8122 bro calibration karna itna bhi easy nahi hota bhot difficulties face ki hai maine bas video mai cover nahi kiya or ha plane banan itnabhi hard nahi hai!
Wow nice video
Really we getting videos from all states of engineers. Thanks Indian life hacker.❤️❤️
Is 2.8 is best?? I only use Fsi6 receiver for flying with fsi6 radio.
Boss tho kaya difference mila apko with APM and without any flight controller???
👍🏻 awesome
it is a little bit hard for me to understand how to control the plane, but great job you did!!
Can it land automatically
*Do we need to register these styrofoam planes also with the DIGITAL SKY PLATFORM OF GOVT ?*
You are doing a great job bro
Nice project yar
Magnificent 👌👌👌
Thanks!
can we also use alt hold as a flight mode
Congratulations bro you got chance
Bro it was great seeing the RC Plane using flight controller. Just want to know how set up the Flight mode on the transmiter for RC plane ...is it same settings as like in Drones ??
different
Hi. Yaar apne digram main. ESC ki wire apm ki out main lgai hai. Tu receiver kaise power up hoga?
What did you use for telemetry communication
Wow
9:17 Plane be like: Jaiii Hanumannnnn
How do you connect a fpv camera to it?
Hi. How can move the plane for calibration while connected with PC.
At-least tell us how did you configured the Servo Controls .
Hi bro this is vijay commented on youtube regarding apm.iam using apm 2.8 for my quad and pixhawk 2.4.8 .and iam using telemetry 448 mhz.the problem i face with these things is my telemetry is used to connect inetially but later on when i configured to programm with telemetry i lost connection with the air and ground module .and iam Presently usind bluetooth hc05 as my short range telemetry.
2 comming to pixhawk .iam using ublock 8 as my gps module and fly sky i6 as my radio and i6 b as my receiver can i auto tune using. 6 ch receiver and iam not using any ppm encorder.
3 coming to apm 2.8 How to enable external compass by soldering the tabs and having some problems with jp1 and jp2 . please replay me after seeing this message .
First question:- I'm using 433hz telemetry and i haven't faced that problem, try to connect with android tower app.
2nd question:- yes you can.
3rd question:- On the extreme right corner of apm 2.8 you will find three pins (pair of two) if you want to use internal compass then connect jumper to the first pin (on the bottom side) and if you want to use external one then connect that jumper to the third pin.
In some of the flight controller boards there is inbuilt jumper that selects the internal compass automatically, position of external jumper doesn't matter there so you will need to open your board and just unsolder that point!
Thanks bro muja ye he video chai tha
Thanks!
Great brother we can made rc plane from K.K 2.1.5 please tell me nice creativity i like it bro
APM have arduplane firmware that's why its easy to use it with plane can't say same for kk
Yes bro you can use kk flight controller board in Rc plane but that flightcontroller doesn't have advanced features like apm2.8
You can only use stabilize mode in kk board but in apm2.8 you will find so many modes like stabilize, FBYA mode, FBYB mode, Auto launch, RTL (return to launch), circle, auto tune, Land and many more, it also has other features like you can connect a fpv camera with, it will show you the live battery voltage, current monitoring and many more features like that so I suggest you to use apm instead of kk.
Hello bro I have successfully built the drone
But I am having some problems while flying the drone
The drone keeeps on spinning (yawing)
At first I thought one of the motor was not spinning in the right direction
But all the motors are spinning diagonally clockwise and diagonally counterclockwise
Then I thought it was the esc calibration problem I calibrated it more than 5 times
Then I thought it wouldn’t be the esc calibration problem cause if the ESCs are not calibrated correctly
Then the drone will not spin(yaw) it will either pitch up or down or roll left to right
Then what is the problem???😔😔😕
Pls help bro pls…….
it maybe as simple as a trimming issue
How fly with ct6b transmitter?
Did it can fly auto pilot bro...???
Isme meri wing ki video use hui hai it's not fare mene wo video apne channel ke bnayi thi wha se isne download krke apni video me lgaa li 😢😢😢😢😢
How i select mode if i have FS-CT6B model
You can use that little rotatory knob!
Bro video is very nice but he should make a detail video so that people like me will understand and trouble shoot the problem that we people are facing thats it bro please try to make a detail video.so we will understand it clearly bro .and all the very best
I also faced a lot of difficulties while working with apm2.8 but I haven't mentioned those difficulties in this video because video bhot lamba hojata.
If you guys have any difficulties then you are free to ask I would like to solve your problems!
You can ask me in the comment section or here is my email ID
kalaskar.pd@gmail.com
.
.
.
Thanks!
Keep it bro. Mera ek doubt hai Sab channels ko check kaise karenge remote ke through aur sari motor ki specially 2 bldc motor ki wiring kaise ki
ruclips.net/video/n11dAPh0V3c/видео.html
how did you setup the thrust differential for the twin props ?
Looking for porson to help me rc project in oman
Please make a Rc helicopter using APM 2.8 or 2.6
Nice video but I am working on how to make a rc plane with flysky receiver and transmitter
Thats too simple bro, you will find soo many videos on youtube!
@@prathameshkalaskar9250 it's my wish
भाई में भी rc प्लेन बनाता हूँ मेरे वीडियो को भी डाल दीजियेगा अपने चेनेल पे
Please i need second number plans dimensions
yes make a video with kk2 flight controller
angle nahi chaiye motors ko....
Bro iss type ke or video upload karo
Make with kk2.1.5 F/C because i dont have laptop
Without remote
Ft A-10 warthog ka plan build
Bhaiya meko v video Dala na video aap ke channel please bataiye kaise hoga
First send your short video to indianlifehacker@gmail.com
If we will like it, than will ask you to make full tutorial video for upload.
Is video me 2 alag alag plane hai
Please dimensions
Brother you know much about all this so you should have created your personal RUclips channel
some info. 1) at 3:30, S F props NOT correct for this application. 2) at 9:01, the use of VERY short pushrods is Not recommended; the use of bends in pushrods is NOT recommended. 3) at speed, the asymmetrical shape of the nose will cause a bit of nose-down moment. 4) it is not clear whether the stabs are, sufficiently, 'stiff'. 5) do you SEE that the thrust line is Wonky. in other words, in order to accommodate the (beneath-the-wing) thrust configuration, a HIGH-wing design Should have been used. 6) it appears that the profile of the main wing center section will make More Drag, while making Less lift. 7) you have converted a High-speed design (A-10; jet-powered) to be a BigFatCargo plane. 8) it appears that the use of a controller is, either, an intellectual challenge or a symptom of the pilot's LACK of piloting skills. googletranslate
Thanks for posting, I appreciate your comment. My main motto behind installing the controller is to make flight a little bit easier for the beginners!
One can also do long range fpv and mission planning with the help of controller.
@@prathameshkalaskar9250 sorry. your stated motive is. NOT LOGICAL. can You see WHY that is so. btw,
'if you don't have something Intelligent to say, DON'T TYPE ANYTHING.' because,
i am a lot smarter than your fellow hobbyist.
@@daviddavids2884
You are not smart, you are over smart!
Iske channel(David Davids) pe likes se jyda dislikes hai or ye dusro ko fellow bol raha hai
Please help me with this project
What kind of help you need? Let me know!
@@prathameshkalaskar9250 ok
Please pdf dimensions
I will be sending my video soon but I will not be able to show my face so please clarify that my video can be uploaded to your channel
Maine Puri video nahi dekha isleya confusion ho gaya
Hobby hindi
Huh? What kind a english is this? Video nice but its close to impossible understand from talking.
Hi can I connect you in whatspp
MATLAB ye programmeing se udega
bhai is cheez ko programming nahi calibration kehte hai jo kafi simple hoti hai but plane banana thoda hard
@@creativevishu8122 bro calibration karna itna bhi easy nahi hota bhot difficulties face ki hai maine bas video mai cover nahi kiya or ha plane banan itnabhi hard nahi hai!
Please
sir I have sent you a project on Smart rc robot plz check it out
WTF ?
Please dimensions pdf