I wonder if there are any similar possibilities for Cubase on Windows? I use art conductor 10 and this looks amazing. Without it I can use the articulations, but it wouldn't sync like this based on what's selected I'm sure.
It does not work, I got the message "NO DATA RECEIVED" in MetaGrid despite all the connections are Good with Logic and MetaGrid. Very unstable solution...
Please refer to this: speakerfood.com/apps/help-center#hc-how-do-i-setup-plugsearch-3-for-art-conductor-remote. If you still have problems, email us at support@metasystem.io
I just went through the whole procedure. Metagrid works correctly with Logic as I can use the normal Logic navigation grid however the Art Conductor grid I created as per the procedure show the message "Status. No Data Received Yet". What to do? I think my MBP Pro M1MAx is receiving the Metagrid commands but the iPad does not receive the info from the Logic tracks.
Thanks for reaching out. Can you please check the support page for the PlugSearch: speakerfood.com/apps/help-center#hc-the-art-conductor-object-in-metagrid-pro-shows-unsupported-articulation-set-on-the-selected-track. And if it doesn't work, just reach out to the Support Team at Speakerfood - they will help you in no time with the PlugSearch setup.
@@Metasystemio Many thanks. It is not obvious where the issue is as this is a cooperation between three different app providers using three apps (Metagrid, Metagrid server and PlugSearch) . The reason there was not info send to my iPad was that PlugSearch app has its output in the Control Surface on Off by Logic default and you have to set it manually to "PlugSearch". Now I have the articulation sets grid shown in Metagrid. Highlighting notes in the piano roll editor and pressing an articulation button in Metagrid works correctly. However when you play live and push the articulation buttons it writes the key switches in the piano roll but unfortunately seldom the correct ones. I tried three different libraries. Some articulations work but once established, i.e. a swell, changing to an other articulation is in most cases an issue.
I have to test a bit more it is very unstable. All works and switching between tracks gives the correct articulation grid but then suddenly a minute later when you return to the same track Metagrid shows ùnsupported articulation set. I think the issue is plugsearch which despite a successful scan of the articulation in the target directory has issues with the way the articulation sets are organized in sub-directories. I will try putting all in the same directory. I will also open a ticket at Babylon Waves after these tests.
Have you created a dedicated profile for Logic? Please email us at support@metaststem.io. Please watch the quick start tutorial on our YT channel to learn about profiles, scenes, workspaces etc.
Hi, i've the same issue than @mavrosmusic. I'm french and I don't understand how i can add plugsearch "manually" in Logic's Control surface. Could you help me ?
The free version of MetaGrid Pro has a Art Conductor grid installed within the Logic Pro profile so when you switch to Logic Pro, you should have both our default Logic Pro Project grid and the Art Conductor grid assigned to the scenes available on the side bar. You don't need to add anything. However, if you upgrade to MetaGrid Pro Premium you can add the Art Conductor object to any grid by tapping Edit > Layout, creating a large empty slot for the Art Conductor object and then selecting this slot and tapping the Add button and selecting the Art Conductor object. If you need more help/info - email us at support@metasystem.io.
@@Metasystemio Ok, but i've the premium or full version. Should i must delete my first personnal Logic's grid and re-create step by step with your youtube tutorial ?
@@Metasystemio Hi, I already was on premium. I've managed by switching beetween USB and WIFI, open a Komplete Kontrol, select the corresponding articulation in Art Conductor and "tadam". Magic, they appear on the iPad.. Thanks a lot
I understand up till 3:22 of this setup, but at this point I'm unable to select more than one cell at a time. How can I select all cells as you show in the video? Thank you
@@Metasystemio Yep like an fool I figured this out just after I put the comment in. Thank you. However, now that I have set it up as you described and I have loaded an instrument and its articulation settings from Art Conductor I receive the message “Status: No Data Received Yet”. The Babylonwaves logo shows up in MetaGrid Pro, so I know that it has established a connection with Logic. And I am running the current version of PlugSearch (3.4.6).
@@winip9261 Could you email us at support@metasystem.io? We will do our best to help you configure the components. Let us know if you have installed PlugSearch and you are using ArtConductor articulations sets.
Logic Articulation Remote is the result of the cooperation between MetaSystem, Babylonwaves and Speaker food and requires MetaGrid Pro Premium, Art Conductor and PlugSearch to work.
@@Metasystemio Is there something like this, but for Cubase? BTW I'm a new MetaGrid Pro user and I am blown away - thanks for making such a great and affordable tool!
this is what we needed to make it work and also get clarity on what to purchase. Thanks
very helpful, thank you!
I wonder if there are any similar possibilities for Cubase on Windows? I use art conductor 10 and this looks amazing. Without it I can use the articulations, but it wouldn't sync like this based on what's selected I'm sure.
Make sure you have the ipad focused on the Logic pro X app or this will be created as a desktop profile.
It does not work, I got the message "NO DATA RECEIVED" in MetaGrid despite all the connections are Good with Logic and MetaGrid. Very unstable solution...
Please refer to this: speakerfood.com/apps/help-center#hc-how-do-i-setup-plugsearch-3-for-art-conductor-remote. If you still have problems, email us at support@metasystem.io
I just went through the whole procedure. Metagrid works correctly with Logic as I can use the normal Logic navigation grid however the Art Conductor grid I created as per the procedure show the message "Status. No Data Received Yet". What to do? I think my MBP Pro M1MAx is receiving the Metagrid commands but the iPad does not receive the info from the Logic tracks.
Thanks for reaching out. Can you please check the support page for the PlugSearch: speakerfood.com/apps/help-center#hc-the-art-conductor-object-in-metagrid-pro-shows-unsupported-articulation-set-on-the-selected-track. And if it doesn't work, just reach out to the Support Team at Speakerfood - they will help you in no time with the PlugSearch setup.
@@Metasystemio Many thanks. It is not obvious where the issue is as this is a cooperation between three different app providers using three apps (Metagrid, Metagrid server and PlugSearch) . The reason there was not info send to my iPad was that PlugSearch app has its output in the Control Surface on Off by Logic default and you have to set it manually to "PlugSearch". Now I have the articulation sets grid shown in Metagrid.
Highlighting notes in the piano roll editor and pressing an articulation button in Metagrid works correctly.
However when you play live and push the articulation buttons it writes the key switches in the piano roll but unfortunately seldom the correct ones. I tried three different libraries. Some articulations work but once established, i.e. a swell, changing to an other articulation is in most cases an issue.
Same here!
@@mavrosmusic Can you register a ticket at babylonwaves specifying which libraries you are using. Marc will investigate and sort it out.
I have to test a bit more it is very unstable. All works and switching between tracks gives the correct articulation grid but then suddenly a minute later when you return to the same track Metagrid shows ùnsupported articulation set. I think the issue is plugsearch which despite a successful scan of the articulation in the target directory has issues with the way the articulation sets are organized in sub-directories. I will try putting all in the same directory.
I will also open a ticket at Babylon Waves after these tests.
I have problems with Art Conductor, grids simply disappear, please find a solution as I am thinking of sending the product back.
Have you created a dedicated profile for Logic? Please email us at support@metaststem.io. Please watch the quick start tutorial on our YT channel to learn about profiles, scenes, workspaces etc.
Hi, i've the same issue than @mavrosmusic. I'm french and I don't understand how i can add plugsearch "manually" in Logic's Control surface. Could you help me ?
The free version of MetaGrid Pro has a Art Conductor grid installed within the Logic Pro profile so when you switch to Logic Pro, you should have both our default Logic Pro Project grid and the Art Conductor grid assigned to the scenes available on the side bar. You don't need to add anything. However, if you upgrade to MetaGrid Pro Premium you can add the Art Conductor object to any grid by tapping Edit > Layout, creating a large empty slot for the Art Conductor object and then selecting this slot and tapping the Add button and selecting the Art Conductor object. If you need more help/info - email us at support@metasystem.io.
@@Metasystemio Ok, but i've the premium or full version. Should i must delete my first personnal Logic's grid and re-create step by step with your youtube tutorial ?
@@Metasystemio Hi, I already was on premium. I've managed by switching beetween USB and WIFI, open a Komplete Kontrol, select the corresponding articulation in Art Conductor and "tadam". Magic, they appear on the iPad.. Thanks a lot
I understand up till 3:22 of this setup, but at this point I'm unable to select more than one cell at a time. How can I select all cells as you show in the video? Thank you
Just drag your finger across the grid.
@@Metasystemio Yep like an fool I figured this out just after I put the comment in. Thank you. However, now that I have set it up as you described and I have loaded an instrument and its articulation settings from Art Conductor I receive the message “Status: No Data Received Yet”. The Babylonwaves logo shows up in MetaGrid Pro, so I know that it has established a connection with Logic. And I am running the current version of PlugSearch (3.4.6).
@@winip9261 Could you email us at support@metasystem.io? We will do our best to help you configure the components. Let us know if you have installed PlugSearch and you are using ArtConductor articulations sets.
@@Metasystemio Thank you for the quick reply. I did email support now and they have responded.
Does it work without art conductor ?
Logic Articulation Remote is the result of the cooperation between MetaSystem, Babylonwaves and Speaker food and requires MetaGrid Pro Premium, Art Conductor and PlugSearch to work.
@@Metasystemio Is there something like this, but for Cubase? BTW I'm a new MetaGrid Pro user and I am blown away - thanks for making such a great and affordable tool!