HOW TO SELECT SPRING FOR MOLD EJCTOR ASSM_ PART 1 BASIC REQUIREMENT.
HTML-код
- Опубликовано: 20 авг 2024
- HOW TO SELECT SPRING FOR MOLD EJCTOR ASSM.
Link Part 2
• HOW TO SELECT SPRING ...
As one of the widely used elastic parts in molds, the springs are mainly used for the purposes of unloading, material pressing, pushing and ejecting. Based on different loading capacities, springs are marked with five different colors to make it easier to distinguish and select them.
Pls. Like and subscribe channel for more videos🙏
MOLD DESIGN # • # MOLD DESIGN REVIEW #...
For Paid Online training reach us
SK CAD CAM SOLUTIONS.
+91 8788639951 ,9764126754
ZW3D Authorized Reseller & Training Partner
sir is there any calculations for selecting the diameter of RP??
Not available any calculation ,but must check load from ejector assembly to decide Dia of Return pins.
sir ejector pins are used to eject the part
and ejector retainer pins are used to retain the ejector assembly(Safety of ejector pin)
Sir make video of gas spring selection calculation and why they are used instead of coil springs?
Pillar and guide bush मे कौन सी फिट होती है
और इनके बीच कितना टोलरेंस होता है
It must slide fit as per ISO STD tolerance. Keep Pillar g6 and Bush H7 🙏
@@SKCADCAMSOLUTIONS sir I was asking tolerance in microns
@@final_destination_uk it's different for each diameter. Pls refer std ISO tolerance sheet. You will get it on Google.
@@SKCADCAMSOLUTIONS sir wedge block ka angle kaise decide aur calculation krte hn?
@@final_destination_uk will make video soon