about service mode when you choose the instrument with nec+ 24c32 there you have service mode button click on it and there you can see all manual for how done by service mode.
Waldemar Fechtel Hello, friend, if you see pin & all 7 cs byts by obd in engine, so you can prepare dealer key by obd, and after adapt to immo, but if your system kesylessgo function, so more safety to open comfort module read and prepare by tango and write back to CM and adapt it by vcds..
Gustavo Esquinca Hello, you have 2 choice in your case. Or dismount ecu read flash eeprom to after actract pin - CS, or by so carefully open comfort module and read dump of it 95320, there you can prepare key by dump use tango, or get pin + cs to prepare key by CS .
Hello and thank you for this video would it be possible to have the schema electrique for me to do the same test bench that you passat B6 -calculator injection - ccm - keyless keys and keyless - and elv? please ? thank you
Question this is lost key or u have one available..because the car I have there no key at all Can u please tell me please which is first .....1 lost key prepared 2 read pin Add 1 key or 2 Them 3 keylearn Please
Thank you it will be necessary that I install it on my pc thank you for all your videos as a chief programmer elv passat b6 with vvdi 2? please because it is the hardest models to do? thank you
pouettedu76 76 Hello, to adapt elv for passat for me vcds is good, but some times the 46 comfort module can’t accept to done the procedure of elv adapt, so here all we can do just try .if not done the adaptation here i can say need lot time to see where is the error in comfort module data or in board. Best way found a kit .
Jose Taracena Hello, yes you can get pin and C-S from engine ecu by obd2 and after prepare dealer key, and after learn it to car, and after go to 46 to learn the remote lock unlock function.
I write transponder passat cc 2013 keyless go id 46 by reading comfort module 95320, but i can not write remote control. How can i do this? Have keytool plus.
Hello. It must be your remote key new keyless function to done. You can’t do it as programe trsnsponder and after program the remote. When you prepare the remote key after write back to CM and after you can by vcds continue the adapting procedure.
I think one of your comments say you can read dump by Tango?...how to read dump when all keys lost?..some mention chip is 95320..but look like the chip on my board is 95080.. thanks for information
ammreid Hello, all CM for passat with 95320 memory eeprom chip. Yes you can read the chip with any programer and after load this dump in tango and you can direct add key remote or transponder to this dump.
@@haroutiounhalladjian having trouble loading dump... keep getting error on vvdi and avdi saying "Incorrect Dump" ..maybe my basic eeprom reader is not saving eeprom with correct information??? have you had trouble like this before... the only option on my eeprom reader for 95320 chip is "Si" chipset
Hello. to done by vvdi2, first you must dismount comfort module and read eeprom 95320 and after go and load this dump in vvdi2 by choosing (transponder programming)
hello friend great work in all your videos i need help i need wiring scheme or pin out to make such as that bench set please help me or send me your e mail for contact thanks
Hello, friend its hard to explain it how done the connection with me this connection done with me about more then 12 years ago. So try get elsawin software and there it show you all diagrams of wiring out & input connectios.
Super
PS: I have to adapt a new elv and for the moment perssonne did not succeed to do it even the garage vw could not thank you for the help
tHANK yOU FOR YOUR VIDEO IS AWESOME !!!
Interested in how to make VW /Seat/skoda/ from service mode.
Your videos are very good.
Soon there will be 1,000,000 views
about service mode when you choose the instrument with nec+ 24c32 there you have service mode button click on it and there you can see all manual for how done by service mode.
when use china key.it need make first dealer key or not?
Waldemar Fechtel Hello. Yes
this need to be done with vvdi2 tango funktion?in the wizzard i dont see make dealer key
Waldemar Fechtel Hello, friend, if you see pin & all 7 cs byts by obd in engine, so you can prepare dealer key by obd, and after adapt to immo, but if your system kesylessgo function, so more safety to open comfort module read and prepare by tango and write back to CM and adapt it by vcds..
Hi
I try to do a duplicate key for a 2010 VW CC but my VVDI2 couldn't finish the autodect , so I din not have the pin # and the CS # any suggestions
Gustavo Esquinca Hello, you have 2 choice in your case. Or dismount ecu read flash eeprom to after actract pin - CS, or by so carefully open comfort module and read dump of it 95320, there you can prepare key by dump use tango, or get pin + cs to prepare key by CS .
Nice guide
Ok thanks and pence you if on swappe the elv mcu of new elv can work or not? thank you I leave you alone after his
Hello and thank you for this video would it be possible to have the schema electrique for me to do the same test bench that you passat B6 -calculator injection - ccm - keyless keys and keyless - and elv? please ? thank you
pouettedu76 76 Hello, its not easy to done, but you can use Elsawin to prepare the system for ready to test or program.
Hi, It's Possible Having just pinout for kessy passat . ? thanks in advance
Hello, see who save ElsaWin there you can see or found what u wish.
How to Program 2013 VW passat id46 Remote
You could learn how to record this remote? Passat CC keyless id 46
Question this is lost key or u have one available..because the car I have there no key at all
Can u please tell me please which is first .....1 lost key prepared
2 read pin
Add 1 key or 2
Them 3 keylearn
Please
👍
Thank you it will be necessary that I install it on my pc thank you for all your videos as a chief programmer elv passat b6 with vvdi 2? please because it is the hardest models to do? thank you
pouettedu76 76 Hello, to adapt elv for passat for me vcds is good, but some times the 46 comfort module can’t accept to done the procedure of elv adapt, so here all we can do just try .if not done the adaptation here i can say need lot time to see where is the error in comfort module data or in board. Best way found a kit .
Do you execute vvdi2 services remotely?
Evandro Arruda Hello. Sorry no
Can I do this on 2006 Passat same system without removing nothing
I have vvdi2 please can u give me that info thank u
Jose Taracena Hello, yes you can get pin and C-S from engine ecu by obd2 and after prepare dealer key, and after learn it to car, and after go to 46 to learn the remote lock unlock function.
@@haroutiounhalladjian thanks u so much
I write transponder passat cc 2013 keyless go id 46 by reading comfort module 95320, but i can not write remote control. How can i do this? Have keytool plus.
Hello. It must be your remote key new keyless function to done. You can’t do it as programe trsnsponder and after program the remote. When you prepare the remote key after write back to CM and after you can by vcds continue the adapting procedure.
@@haroutiounhalladjian Thanks bro🤝
@@haroutiounhalladjian friend, i have vvdi2, but it can not writing remote, transponder working, but remote not
Thank you.
It is better to do with Tango.
I think one of your comments say you can read dump by Tango?...how to read dump when all keys lost?..some mention chip is 95320..but look like the chip on my board is 95080.. thanks for information
ammreid Hello, all CM for passat with 95320 memory eeprom chip. Yes you can read the chip with any programer and after load this dump in tango and you can direct add key remote or transponder to this dump.
@@haroutiounhalladjian having trouble loading dump... keep getting error on vvdi and avdi saying "Incorrect Dump" ..maybe my basic eeprom reader is not saving eeprom with correct information??? have you had trouble like this before... the only option on my eeprom reader for 95320 chip is "Si" chipset
ammreid Hello, try send your dump to my email. data_speed2006@hotmail.com - to check it
Hello.
How to Adapt Passat cc/b6 all lost keys?
юра юра
Hello.
Best way read comfort module dump 95320 and prepare key by tango and adapt by vcds
I know.Interested in how to do with VVDI.
Thanks
Hello. to done by vvdi2, first you must dismount comfort module and read eeprom 95320 and after go and load this dump in vvdi2 by choosing (transponder programming)
Please can you do this for me, can i send my ecu cluster and ccm
7LAMPS MINISTRIES Hello, you mean adapt them to each other?
@@haroutiounhalladjian yes exactly
7LAMPS MINISTRIES Hello, yes sure i can do it.
Where are you located
Do you have a web site?
most cars are all keys lost.
hello friend
great work in all your videos
i need help i need wiring scheme or pin out to make such as that bench set please help me or send me your e mail for contact
thanks
Hello, friend its hard to explain it how done the connection with me this connection done with me about more then 12 years ago. So try get elsawin software and there it show you all diagrams of wiring out & input connectios.
Make dealer key noot need?
Only need learn 😂😂😂
Dislike 👎