Being an owner of a Stryker Pro 470 for use off the coast of Mexico, these boats are amazing!!! We use ours as a dive boat, go on snorkelling tours with friends and fishing. When we bought this I wondered how the 470 would handle the ocean and what it can throw at a person. So far our 470 has exceeded our expectations, seriously! This LX320 really does look like a pint size Pro 470 with the aluminum floor, seats and scotty mounts if the size fits what you need you'll be satisfied. I don't endorse much, Stryker boats I trust. Costumer service to date has been exceptional. We like our Stryker enough we've talked about buying a 2nd one for our retirement needs.
I thought new for 2024 was the aluminum channel, welded to the back of the transom, to mount the wheel brackets on. On the boat above it does not have that channel welded for the wheels to mount on. I really don't want to drill though the transom.
Oh see what you mean. The transom on models 320 and under can’t use that as the bend profile is different. On these, it’s no issue to bolt directly to the transom. Adding the rigid stainless steel brackets to this style aluminum transom actually increases the strength of the transom. We do wheel bracket installation service if required before the boat goes out.
Typically none of the brackets are ever pre installed on any model. Back in 2017 we did run a trial on that, but have never included that particular item since. The stainless steel brackets that come with the wheels are substantially stronger than anything welded aluminum brackets could provide. ✅⚓️
Depends on where you live, and I t depends on the boat and usually the motor size. I would check with your local vehicle registration office and find out the specific rules for your area.
So i have a question very interested on getting a pro however just bought brand new 20hp short shaft motor. Can you get an lx with the full bottom, or a pro with a short transom.
Do the LX 320 or the PRO 320 work well on the ocean for two adults with kit, or are they too small? And can either of them handle a Mercury 20 hp outboard or is to big for it? Cheers.
I would not recommend the 320 for ocean excursion as a primary vessel. You would be much better served with a 380. If it’s the weight, you’re concerned about I’d strongly lean towards the LX HDR, pro 380 with the new pro v Airfloor. Check out the video of it on RUclips.
@@StrykerInflatableBoats Thank you for the response. I will look into the PRO 380. Light weight would be ideal since I would be carrying to the beach and inflating/deflating each time. Cheers.
![GEEK TIMË [OFFICIAL AUDIO]](http://i.ytimg.com/vi/ry-6RvkH880/mqdefault.jpg)
Being an owner of a Stryker Pro 470 for use off the coast of Mexico, these boats are amazing!!! We use ours as a dive boat, go on snorkelling tours with friends and fishing. When we bought this I wondered how the 470 would handle the ocean and what it can throw at a person. So far our 470 has exceeded our expectations, seriously! This LX320 really does look like a pint size Pro 470 with the aluminum floor, seats and scotty mounts if the size fits what you need you'll be satisfied. I don't endorse much, Stryker boats I trust. Costumer service to date has been exceptional. We like our Stryker enough we've talked about buying a 2nd one for our retirement needs.
Really cool. If I purchase cup holders, mounts etc. Does it all fold up with the boat or do you have a separate bag to carry the accessories?
That's The One PERFECT
Thanks! Its one of our best sellers ⚓️
I thought new for 2024 was the aluminum channel, welded to the back of the transom, to mount the wheel brackets on. On the boat above it does not have that channel welded for the wheels to mount on. I really don't want to drill though the transom.
Oh see what you mean. The transom on models 320 and under can’t use that as the bend profile is different.
On these, it’s no issue to bolt directly to the transom. Adding the rigid stainless steel brackets to this style aluminum transom
actually increases the strength of the transom.
We do wheel bracket installation service if required before the boat goes out.
The 2024 320 does not come with the wheel mounting brackets already installed?
Typically none of the brackets are ever pre installed on any model. Back in 2017 we did run a trial on that, but have never included that particular item since. The stainless steel brackets that come with the wheels are substantially stronger than anything welded aluminum brackets could provide. ✅⚓️
Might be a stupid question but do you need registration numbers for an inflatable. I'm in Delaware
Depends on where you live, and I t depends on the boat and usually the motor size. I would check with your local vehicle registration office and find out the specific rules for your area.
So i have a question very interested on getting a pro however just bought brand new 20hp short shaft motor. Can you get an lx with the full bottom, or a pro with a short transom.
You can do a custom order of one. If ordered right now might be in stock for end of June ish.
Do the LX 320 or the PRO 320 work well on the ocean for two adults with kit, or are they too small? And can either of them handle a Mercury 20 hp outboard or is to big for it? Cheers.
I would not recommend the 320 for ocean excursion as a primary vessel. You would be much better served with a 380. If it’s the weight, you’re concerned about I’d strongly lean towards the LX HDR, pro 380 with the new pro v Airfloor. Check out the video of it on RUclips.
@@StrykerInflatableBoats Thank you for the response. I will look into the PRO 380. Light weight would be ideal since I would be carrying to the beach and inflating/deflating each time. Cheers.
Thật là một sản phẫm tuyệt vời tôi không thể mua được thuyền của bạn từ Việt Nam nên tôi phải mua 1 thuyền 2m7 từ thương hiệu Tadpole của Trung Quốc .