EASY way. 3D drawing on metal. Incredible result
HTML-код
- Опубликовано: 11 апр 2024
- Hello!!! In this video I tried to make a 3D drawing on metal, I drew the drawing on a new axe. The result turned out, it seemed to me, incredibly good. How do you like it?
Hi all. This time I want to use a new ax to create a 3D drawing on metal in the style of the Warhammer 40,000 universe, namely Juggernaut. Thanks to patience and perseverance, using simple technology, while sitting at home, I created a three-dimensional drawing on metal. The complex pattern on the steel adds exclusivity to the ax. For me this is an incredible result, which I am very pleased with. How do you like my work?
As the basis of the new ax, I used a new ax purchased from an online store. The ax turned out to be reliable, but I didn’t like its shape. What I've done? They cut off the unnecessary metal and gave the ax the shape I needed, with a slightly curved cutting edge. Cleaned and sanded. Once the blank was prepared, I decided to apply a Warhammer 40,000 Juggernaut style image to it. After multilayer electrochemical etching, I began to get the effect of a three-dimensional pattern on the metal. When the drawing was ready, I blackened the product with a special product for black steel. Hand grinding and polishing. I was pleased with the result of this work and I hope you liked it too.
Dear friends, if you decide to repeat what you saw. Don't forget to follow safety precautions. Gloves, mask, glasses, etc. And what you see is just a flight of creative imagination, and not instructions on how to do it. Thanks for understanding!
TO SUPPORT THE AUTHOR: If you have the opportunity to support me!!!
Donat - www.donationalerts.com/r/miha...
With your support you help this channel develop!
Thank you...
#howtodraw #engraving #drawing #metaletching #howtomake - Хобби
Hi all. This time I want to use a new ax to create a 3D drawing on metal in the style of the Warhammer 40,000 universe, namely Juggernaut. Thanks to patience and perseverance, using simple technology, while sitting at home, I created a three-dimensional drawing on metal. The complex pattern on the steel adds exclusivity to the ax. For me this is an incredible result, which I am very pleased with. How do you like my work?
Всем привет. В этот раз я хочу с помощью нового топора создать 3D рисунок на металле в стиле вселенной Warhammer 40,000, а именно Джаггернаут. Благодаря терпению и усидчивости, используя несложную технологию, сидя дома, я создал объемный рисунок на металле. Сложный узор на стали придает топору эксклюзивности. Для меня это невероятный результат, которым я очень доволен. Как вам моя работа?
🤝🤝🤝...
Наишекарнейшая работа!!! Видосу лайк!!! Мастеру низкий поклон!!!
🤝
Amazing craftmanship
🤝🤝🤝
Awesome work. I love it.
🤝🤝🤝
👍👍👍👍 very good 🙂
🤝
Beautiful.
🤝🤝🤝
Nice Khorne Juggernaut...
🤝
Super schön und vielen dank für das tolle Video
🤝🤝🤝
That is amazing!
🤝
Beautifull
🤝🤝🤝
Да уж, результат просто велеколепен! 👍🔥
🤝
Нереально круто!
🤝
The only time I don't mind the phone going off: when it's a notification that Mihail posted a new video. 👍👍. Great job! P.S. Thanks you for taking the time to share your work.
🙂👍🤝🤝🤝
Nice!
🤝🤝🤝
Maximum effort! Absolutely stunning ❤🙂
Subbed, without hesitation 🙂
🤝🤝🤝
De simple no tiene nada, mad bien es una obra de arte.
🤝🤝🤝
Гарна робота!
🤝🤝🤝
Bonjour très beau travail. Quel peinture utilisé vous merci ?
Дуже гарна робота! 👍
🤝🤝🤝
nice
🤝
🤤🤤🤤🤤🤤🤤Queeeee trabajo más hermoso e impresionante.
🙂🤝
Мастер!
Красотишша! ))
🤝
Khorne finds you worthy!
🙂🤝
I was looking for this.
👌👍
🤝🤝🤝
Работа, огонь. А, что за лавсановая бумага для переноса рисунка у вас? Как называется? Искал нечто подобное на маркетплейсах, но попадается обычная калька.
Спасибо. Да хрен его знает, где брать 🤷♂️. Мне немного подарили. Её раньше делали. Аналог тоже не нашёл пока
А дерево он после этого рубит? Или пилит?
You say 'easy way' but you don't give details of the process : the liquids, the paint, the tools, the voltage system etc. 🤔 Really nice result though. 👍
Doesn't say it's a "how to"
But it's so easy!!!!
He already mentioned salt in the beginning. You need to work a little hard for the electrical voltage, the paint is not important either, use your mind a little.
"Больше крови богу крови!
Больше черепов для трона черепов!"
✊🤝
Это называется ПРОСТОЙ способ??? Спасибо, повеселили от души))) А как тогда выглядит СЛОЖНЫЙ способ? )))))
Сложным, через простое... 🙂🤝🤝🤝
Hi Mihail, I wish we had people with your talent in France or in Europe. I make knifes and your skills would be a nice addition to my blades. Let me know if one day you move out from RU (which I guess you're in).
🙂🤝🤝🤝
Очень красиво. А на второй стороне?
Спасибо... Позже будет второй ролик, там я закончу работу над этим топором.
👍
🤝🤝🤝
Это так просто. Это как у программистов, когда они говорят: "А тут мы пишем небольшой скрипт". делов то на 2 мин.
🤝
Incredible result...? hell yeah!!... Easy way...? hell no!!... I'll give you a sub for that.
🤝🤝🤝
Круто, очень круто! Казалось бы ни чего сложного но есть одна маааааленькая "мелочь" - мастеру нужно чëтко представлять конечный результат и видеть последоввтельность травления каждой детали ещё на стадии переноса рисунка на изделие. А так всё проще паренной репы. 😁😁😁
🤝🤝🤝
Иметь представление - это вообще не проблема, проблема - это быть настоящим художником прежде всего. А тупо травить - это действительно просто.
Красотень, подскажите, потом чем травили когда мелкие детали делали?
Спасибо, да всё так же как на видео, можно сказать "на глаз"...
Это не простой способ, тут возни столько.
Сама техника исполнения простая.
Que es el polvo blanco
Agente de limpieza
Одного не пойму за эти рисунки на топорах ... Для стены согласен, норм.. Для работы заржавеет и т.п.,...
Эстетика... У меня обычно на подарок берут для родных и близких людей. Такой подарок приятно получить. А по мне так у камина или мангала поставить или повесить, почему нет... Дело такое, фантазия в помощь... 🤝
Вы ошибаетесь, если сделать травление а затем анодирование и воронение иди химическое хромирование да вариантов тьма, и хрен ему что будет, даже если сутками в воде воляться булет.
Too much paper maybe you needs to use recycling materials.
Испортил неплохой топор
What the *** purpose of all the "easy" effort, anyway? You need ax axe or what?
Qué maravillosa paciencia ,por dios quedó increíble ..!!!
🤝
Ну проще некуда😂😂😂😂😂