C64 BlinkenDiag
HTML-код
- Опубликовано: 10 сен 2024
- I made a C64 diagnostic and dead test cartridge, pretty normal stuff - except for the excessive amounts of LEDs added. I call it the C64 BlinkenDiag!
Excuse the potato filming things in the wrong orientation.
Video with the lights off please.
(Cues up Rave Music)
Thought Adrian already copyrighted the 8bit dance party scene :-p
The powerlight goes green :-o
Yes, that is the IRQ LED mod... I used an RGB LED because I did not have any bi-colour ones. Probably needs a frosted one instead of clear 🙈
Beautifull :)
Hi Tor-Eirik, I've bought the PCBs to make this, but I'm having difficulty interpreting the BOM from the Github page. Do you have a more detailed list of components needed, or better yet, a pre-filled Mouser cart?
I don't have access to any of the more professional vendors (shipping and import is a _lot_ to where I live). So most of the items are from ebay/aliexpress, is there a specific part you had trouble with?
Likely it is the switch, the one I'm using was this listing:
www.ebay.com/itm/291609448953
@@TEBLify I'm very new to working with electronics, but had to buy this and try building it....so to be honest, it's just about everything. I'm browsing Mouser for the LEDs and the Capacitors for C1-C5 and C6, and there's just so many parameters it makes my eyes glaze over. I'd rather not go the eBay or AliExpress route (having bad experiences with AliExpress right now, TBH) and would prefer going the Mouser or Digikey route. Suggestions?
@@bretttesdall2155 I recommend using ebay/aliexpress over mouser in this case, they make finding common parts extremely hard. Except for ICs, those I'd get from there if available.
I think should work for you:
100nF 594-K104K15X7RF5TH5
10uF 647-UMT1E100MDD