I need help again My knitting blades is not working at all They're new blades I try to adjust them it work for a while and then stop functioning again😢
Good day, I really enjoy and understand how you explain step-by-step instructions. My question is, how to set and precisely replace or adjust the upper and lower looper of the Overlocker sewing machine. I would be more grateful if you could help and make a dedicated video on this topic. Thanks.
This is a very critical adjustment, I would strongly recommend calling a qualified technician to perform this, every model and brand is different, our videos are to assist the end user to perform basic adjustment etc, looper timing and clearances do not fit into this category. Thank you.
Hi. I got in a problem not cutting a fabric on my surger, after changing the knifes . Following up your recommendation, but still not working. It's rolling fabric inside the stitches. My surger : Juki MO-6700. I was trying not to move to much, when I was changing, but regret it when I started.
Sounds like you may need to adjust the position of the blades closer to the needles till you get the sweet spot. I would think it is still cutting the fabric but with the blades in the wrong position horizontally the remaining fabric will still roll inside the overlock stitch.
Thanks so so much, saved me so much time
You're welcome!
Woow ❤ You're a savior 😊 Just fixed my machine
Thank you
You're welcome!
I need help again
My knitting blades is not working at all
They're new blades
I try to adjust them it work for a while and then stop functioning again😢
Thank you this helped me so much
You're welcome!
Thank you so much for the video and the great explanation. Had exactly this problem with my Jack E4 and it was just a matter of adjusting the knives!
Thank you for watching our videos
Thanks so much for the video, it worked well for my machine. I did not place the bottom blade properly. Thanks 👍
Oooohhhhh, now I understand. Thanks for this video. I wasn't setting the spring tension on the lower blade. Who knew!
Glad I could help!
Great information THANK YOU 🧵🪡
Good day, I really enjoy and understand how you explain step-by-step instructions.
My question is, how to set and precisely replace or adjust the upper and lower looper of the Overlocker sewing machine. I would be more grateful if you could help and make a dedicated video on this topic.
Thanks.
This is a very critical adjustment, I would strongly recommend calling a qualified technician to perform this, every model and brand is different, our videos are to assist the end user to perform basic adjustment etc, looper timing and clearances do not fit into this category.
Thank you.
Thank you❤. It worked
You're welcome!
Hi. I got in a problem not cutting a fabric on my surger, after changing the knifes . Following up your recommendation, but still not working. It's rolling fabric inside the stitches. My surger : Juki MO-6700.
I was trying not to move to much, when I was changing, but regret it when I started.
Sounds like you may need to adjust the position of the blades closer to the needles till you get the sweet spot. I would think it is still cutting the fabric but with the blades in the wrong position horizontally the remaining fabric will still roll inside the overlock stitch.
Hi did u ever gor it 2 cut?? Am having that same problem with mines😢
Thank u soooo much,I took my time listen 2 u again and I finally got it thanks again@@ozcommercialsewingmachines
Omg i wish i lived in aussie i would have all my machines changed to the prosew :(
Airfare prices are dropping Richy..😉