Thank you very much this is the best video I have seen about the modification of the C24 I loved it and I saw many videos about them this was the best, I wish I had found this video sooner
Thank you for the very informative consul. I bought a c24 about 15 days ago. This is my first RC car. And I wanted to upgrade the speed of c24. And then I found your video. Awesome experiment. The speed is too fast for me. I want to increase the speed to less than twice the maximum speed of the stock vehicle. Can I just do what you're trying and replace it with a higher performance motor? The remaining parts remain original.
Thanks for the suggestion. I would like to try it too, but i like the scale looks of the original one. Maybe i will try to modify servo links to improve a little. Original servo ratio is giving too fast reaction at minimum turn
You need to put unlocked diff in the axles you can find them on amazon, I put a 2435 Brushless Motor in my full metal gearbox alot faster then your one in 2nd gear, but the unlocked diffs is a must 👌 😎 But epic idea with the out runner I'll see if I can find one for my next bauld 😀
Hi, not in direct drive like this. Maybe if you use a bigger outrunner sensored motor and a crawler esc. With this motor i used it is more buggy driving style
how can you get two of the same RC cars transmitters not to interfere with each other? i have SG-1603 and SG-1604 and they can control each other... make a video if you can...
Only the wpl d12 have original transmitter, all the other models has flysky tx/rx. The wpl c24 was bought as kit without tx, so it is using the flysky tx/rx
@@Heryariska hi, good to know, let me know when you publish it. just checked your channel, very active. you have also the huina 1593 im ulgrading in this months to be used with taranis tx
Hello what do you mean the other engine would be better in the description, as in faster? And also, the links to some of the parts is broken I'd love to buy this stuff haha
Hi because a 800kV would be little slower but with more torque and less cogging than the one show in the video. The one in the video was little too high kv. About the link, after a while they brakes, i suggest to look for the part number i wrote in the description. on aliexpress, you will find them
Direct drive offers speed but not lower end torque for crawling, I have purchased D2225 1350kb outrunner motor and a 10t 0.6m 3.17mm pinion gear, should be almost direct bolt on, just need to drill new holes or enlarge existing gearbox mounting holes from stock 14mm spacing to 16mm, you'll need new receiver and a Blheli_S ESC
Hi, i never used simonk esc. I know bl heli old version you can set it as bidirectional, but i guess you may have cogging and no breaks, but only direct reverse (see my other video about wpld12 conversion , where i tested a cheap bidirectional esc)
Yeah . In the motor description 20a is good for this. But I'm little bit confused cause a big size motor like this run with only 20a . That's why I asked. I'm gonna use 30A cheap esc with this . Hope it will work perfectly. What do you say?
@@rokanuzzamanovi917 hi The motor is not that big, and it is very low kv ,so it could work to 3-4s probably, and it needs small current With the modified wpl d12 batt last forever, so i guess current is really low
@@MakerFabio to be honest with you, i have saved your video, so i guess i watched it alot...as i know there is no way to use the stock transmitter+receiver of wpl c24 to brushless motor..so
@@wahyutuban soooooorrry, now i realized, i thought this video youwere asking, was about the wpl d12, in that one i used the stock transmitter, here on the c24 i purchased only the car and i used my flysky gt3c transmutter Sorry for this. If the remote of the d12 is the same of the c24 then check my other video how to convert the d12 remote for brushless
Thank you very much this is the best video I have seen about the modification of the C24 I loved it and I saw many videos about them this was the best, I wish I had found this video sooner
Hi, many thanks!
Thanks for posting this! Very informal! My c24 is gonna be arriving in a few days. Can’t wait
Ben fatto 👍 ottimo modo per coinvolgere i "piccoli" e fargli sviluppare manualità e capacità di risoluzione dei problemi 😉
Grazie, speriamo “prenda”. Il piacere di fare modellismo col proprio figlio è un doppio piacere
@@MakerFabio la cosa "importante" è se possibile creare con le proprie mani 😉 usando la fantasia 👍
that would make a cool prerunner build
Great idea don't know why I didn't think of that....thanks
Thank you for the very informative consul. I bought a c24 about 15 days ago. This is my first RC car. And I wanted to upgrade the speed of c24. And then I found your video. Awesome experiment. The speed is too fast for me. I want to increase the speed to less than twice the maximum speed of the stock vehicle. Can I just do what you're trying and replace it with a higher performance motor? The remaining parts remain original.
Great work, can't wait for my parts to arrive!
Thabks
Let me know how it goes
That was great!!
bro, you can enlarge the hex tires so that the car doesn't flip over easily😉
Thanks i ll do it actually!
Hahaha that last part was pretty fun! XD
Thanks, i modded my c24 the same way. But i changed the tires to 1/10 flat running tires, its way more stable and doesn't flip.
Thanks for the suggestion. I would like to try it too, but i like the scale looks of the original one. Maybe i will try to modify servo links to improve a little. Original servo ratio is giving too fast reaction at minimum turn
@@MakerFabio add gyro to it.
You need to put unlocked diff in the axles you can find them on amazon,
I put a 2435 Brushless Motor in my full metal gearbox alot faster then your one in 2nd gear, but the unlocked diffs is a must 👌 😎
But epic idea with the out runner I'll see if I can find one for my next bauld 😀
Thanks, i ll look for the differential then!
Gorgeous !
Ciao J
Thanks, i think i need to pump little more real electronic videos instead of models. See y soon
Great to see how your style and quality of the videos improve, being easy to understand and follow!
Bene bene Fabio, I liked the concept simple DIY. But I have a question, can you control the car backwards? Or just forwarded action
Hi
Sure , it just depends by the speed controller, the one i used it has the brake and also the reverse
@@MakerFabio thanks 👍
Awesome......
4:32 this scene is unreasonably funny LOL
Heheh, my favorite one is 4:49 the car bouncing with the front part
@@MakerFabio haha yeah, can't help but think "bOiNk" when I see it lol
Spettacolo
Great work! Does brushless motor have enough torque for crawling?
Hi, not in direct drive like this. Maybe if you use a bigger outrunner sensored motor and a crawler esc. With this motor i used it is more buggy driving style
how can you get two of the same RC cars transmitters not to interfere with each other? i have SG-1603 and SG-1604 and they can control each other... make a video if you can...
Only the wpl d12 have original transmitter, all the other models has flysky tx/rx. The wpl c24 was bought as kit without tx, so it is using the flysky tx/rx
Damn so fast
Yes, maybe a litte too fast. Lower kv would be better
@@MakerFabio i will try in my channel sir, dou you have wacth ?
@@Heryariska hi, good to know, let me know when you publish it. just checked your channel, very active. you have also the huina 1593 im ulgrading in this months to be used with taranis tx
Hello what do you mean the other engine would be better in the description, as in faster? And also, the links to some of the parts is broken I'd love to buy this stuff haha
Hi
because a 800kV would be little slower but with more torque and less cogging than the one show in the video.
The one in the video was little too high kv. About the link, after a while they brakes, i suggest to look for the part number i wrote in the description. on aliexpress, you will find them
Please make ir with the new mn82 lc79 rc 😎
Direct drive offers speed but not lower end torque for crawling, I have purchased D2225 1350kb outrunner motor and a 10t 0.6m 3.17mm pinion gear, should be almost direct bolt on, just need to drill new holes or enlarge existing gearbox mounting holes from stock 14mm spacing to 16mm, you'll need new receiver and a Blheli_S ESC
@daijoubu4529 hi , you are right
No torque for crawling, but i see it as a buggy, for high speed
Cool
I'm little bit confused about motor quality.
Why does the brushless motor has three wires, but the esc has only two wires, how to fix?
you bought a brushed esc
👍
Класс !
Can I use this motor with 30A simonk esc
Hi, i never used simonk esc. I know bl heli old version you can set it as bidirectional, but i guess you may have cogging and no breaks, but only direct reverse (see my other video about wpld12 conversion , where i tested a cheap bidirectional esc)
Thanks for your reply. How much Ampere is perfect for this motor. Is 30a esc or 40a esc good for this. I'm little bit confused 🤔
@@rokanuzzamanovi917 probably even a 20A is sufficent. Check for the motor spec whats the max current
Yeah . In the motor description 20a is good for this. But I'm little bit confused cause a big size motor like this run with only 20a . That's why I asked. I'm gonna use 30A cheap esc with this . Hope it will work perfectly. What do you say?
@@rokanuzzamanovi917 hi
The motor is not that big, and it is very low kv ,so it could work to 3-4s probably, and it needs small current
With the modified wpl d12 batt last forever, so i guess current is really low
Helo there...so what is the transmitter you used ?
Hi, it Is the original transmitter
@@MakerFabio ohh for real? The wpl original transmitter you are using to control brushless motor?
How can you connected it?
@Wahyu Prastyo sorry wrong answer from my side
@@MakerFabio to be honest with you, i have saved your video, so i guess i watched it alot...as i know there is no way to use the stock transmitter+receiver of wpl c24 to brushless motor..so
@@wahyutuban soooooorrry, now i realized, i thought this video youwere asking, was about the wpl d12, in that one i used the stock transmitter, here on the c24 i purchased only the car and i used my flysky gt3c transmutter
Sorry for this. If the remote of the d12 is the same of the c24 then check my other video how to convert the d12 remote for brushless
Is the car still alive? How long do you think it will last?
Hi, yes super alive, i use it often, for small sessions. Very happy, a battery last forever
speed oke
Tu a un compte instagram ?
Hi, not yet. Don t know if i will open a small website or instagram to upload schematics and other files
can you use the motor for the wpl d12 motor
Yes, it has same gear ratio, and the wpl d12 wheels are smaller. 720kv would be even better for low speed woth no cogging, but 1000kv should be ok
@@MakerFabio how about the esc can i use any brushless esc
@@humancalculator711 any car brushless esc. Don t use generic bidirectional esc, or youhave lot of cogging and poor braking. 15A or higher
@@MakerFabio what would be the difference with speed with a 2430 motor with gearbox and the outrunner
@@humancalculator711 2430 has higher kv so you can push more current and so more powerful. But also less battery life and risk to destroy the gearbox.