Very nice work Brad. Love the walnut finish. If I was you I would invest in a spindle moulder to do all your joints and edging, it would save you ages. I know there is more satisfaction in doing it by hand but as a business venture I would opt for the spindle.
Hi Thanks for the kind words. I have the machines to do the joinery more efficiently and have used them on other items, but there is something about using hand tools that gives a piece that extra personal touch, which is what I wanted in this case. Because the project was smaller than what I usually make I wanted to hand cut the joinery.
I agree totally with you, if you have the time working with hand tools is so fulfilling. Them Trailer Trash boards might look flashy but your boards just ooze class. Maybe i'll get round to making my own board, I always wanted to have a crack at doing a secret mitred dovetail.
I'm curious about the wiring of the toggle switch and Fender style light on the top.. I assume that's to activate power to the entire board via the two power supplies underneath. My question is- What exactly is powering that lamp, surely not 120v? I like the idea. Very cool. I've seen it a couple times before also but never knew who the builder was. Would love to know this part in particular. Great job also!
I love the look and enjoyed seeing your steps. I have just started working with wood and enjoy every minute of learning knew tricks of the trade in the shop. I love that you closed the bottom of this pedal board up and left the thickness of the under board. Also the pegs. I assume that this is to ensure the pedal board itself is not damaged when used. I enjoyed seeing your board come to life. I would like to try my hand at creating this as close to your design and standard as possible. Thank you so much for sharing. If I could ask a question I would like to know how think was all the woods used in this board?
Those TRS Solderless Locking Pedalboard Jacks, they only seem to be available in USA, is that the case. Can't find them here in the UK and Neutrik doesn't seem to have them on their website.
Brad, congratulations with your fine project. No doubt you will have success with this product. I have two questions: will sell it as a kit? Would you be interested in selling only the blue prints, for the ones that want to use their own materials?
Hi Tiago Thank you for your kind words. In answer to your questions; I will not be selling it in kit form, as the joinery and combination of materials needs to be very precise. It also goes against my philosophy of Fine Timber Products. Regarding your interest in the plans, I have a basic workshop drawing of the frame dimensions and joinery details that I may upload at some stage, if that takes your interest. Feel free to check out more details at www.schuursproducts.com.au/pedal-board.html
I completely understand, even more after watching your site, it totaly makes sense. I´m really thinking about starting my own creations with wood ( everything related to music. Custom pedal boards, amp cases etc) but dont have the knowledge to do it. It is still a brainstorm on my sketch book. The first step is to atend a course on wood craftsman... Thanks Brad. Good luck with your business.
Hi Brad, can you give me any suggestions on similar wood that would be easy enough to work with and obtain? This is by far the best board i have ever seen.
Hi Evan. Thanks for the kind words, appreciate it! If you let me know where you are based I may be able to make some alternative suggestions that would be suitable locally for you.
Brad, very nice board. Question. What are all the little cutouts on the board under the velcro at 2:24? Is that customer specific for the pedals they use?
Hi Michael. Yes that customer was very specific with the pedal positioning and wiring. The new boards I am working on will be more generic. Thanks for the comment.
This particular Board was $1000 AUD including materials and labour. Currently working out the logistics of international orders as to best protect the timber from the elements and minimise damage during shipping.
Click on the link to view my blog on how to build the Schuurs Pedal Board including free plans. www.schuursproducts.com.au/blog/2015/10/9/how-to-build-the-schuurs-pedal-board-part-1
Hi Brad. That is so beautifully made. I love it, and I think now's the time to invest in quality. I have a question....could the pedals sit in a shallow recess, rather than be flush mounted. I understand the connections will play a part in the depth and design, but I would prefer all the switches to be the same height. Also, the actual height of the unit, (taking into account the strength at the front base), could be slightly high for me. Appreciate your thoughts Regards Jas
Hi Jas Thanks for your compliment! Anything is possible depending on the size of your board and how many pedals you wish to have. The height of of this board was 4" on the crowd side making it just the right size for concealed wiring and power supplies. I always take into consideration the balance of functionality, aesthetics and quality; which can be tricky but you will need to work out as you design your board as to what takes priority and in what order. If you want to discuss further feel free to email www.schuursproducts.com.au/contact-us.html
Thanks Nickham. Haha - yes, this was my first RUclips video. I will never use Garage Band clips again. I have had so much trouble with third party content notifications and had to get them released every time. Very frustrating.
+Adam Smith Hi, these boards I have sold. I am starting a new board for myself soon. Well over due for a nice one just for me. Thanks for your compliment.
Hi everyone Hi guys Appreciate your engagement with the Pedal Board Build video. I uploaded it to see if I was going to receive any interest. I custom built this for a friend as a trial for hand made quality products. I have not officially launched my business as yet. Planning to start next year, but feel free to stay in touch. Many thanks Brad
Brad, fantastic build. Those dovetails are immaculate! Question... When using the locking 1/4" jacks, do you ever run into a problem with signal loss? I tried my hand at a build and for the life of me I can't get any of my high end frequencies back. It's as if I'm running a 100' cable. I know a buffer might help but I really think I'm doing something wrong. Thanks in advance.
@brad schuurs can you explain how you did the toggle switch and light indicator connections/wiring? Also, what is that green box beside the supa charger?
Hi. I would use this kit shop.westcoastpedalboard.com/Pedal-Board-Parts-AC-Power-Harness-Combo-p/diy-pedalboard-harness-master.htm Green box is a T-Rex Fuel Tank power supply. All the best.
+Shelvie Goldschmidt I used a large belt sander to make the sides level and smooth and a disc sander to shape the corners. Final finish by hand sanding.
cant find this company on google :( I really hope someone takes the time to reply to this video/comment with more information. That is one beautiful board!
Hi Juro I have no set supplier, it is wherever I can get the best deals. I have used Ebay, you can also Google search for guitar fitting suppliers as well as local electronic stores. Ensure all works are carried out by a licensed electrician.
Try this link. If I were to do this style switch and lamp again I would use these guys! shop.westcoastpedalboard.com/Pedal-Board-Parts-AC-Power-Harness-Combo-p/diy-pedalboard-harness-master.htm
+Nick DiGiaimo Sorry I didn't seen your comment earlier. There are very few comments now that RUclips will allow to reply straight away. I don't use switches and lights any more. I have a licensed electrician do all the wiring - now I supply a single to double iec. I also use solderless jacks. You can check out some image on this page of my website. www.schuursproducts.com.au/rosewood-pedalboard
MDFB lined with Pedalboard velcro and sealed with an acrylic undercoat and topcoat. I am looking into making them from Polycarbonate going forward. More costly and a little heavier, but very durable. Thanks for the question.
Hi everyone Many thanks to all my subscribers, viewers and the You Tube community for making this video a success. I also appreciate the positive feedback and questions which will help with developing this product more next year. 10K+ views was more than I expected. I have recently made live my website and facebook page for you to help keep in touch and to check out more details about Schuurs Fine Timber Products. Thanks again! www.schuursproducts.com.au/ facebook.com/schuursproducts
SuburbanBoy Tread carefully, Padawan - it is a dangerous road ahead of you. When my 90's rack got stolen it seemed like that cheap, slow and steady way to rebuild. Initially it was. These days I like to think of pedals as the Jelly Beans of guitar. So many colours. So many flavours. So little cash. Yet I salute you for leaving all in one multieffect solutions behind you. You have chosen wisely. "The board is set - the pieces are moving" - Gandalf, stating the obvious.
Hi. Yes this particular board was costly but am working on some smaller designs and simplifying some systems. This customer was really specific about what they wanted which made labour expensive. I'll be letting my subscribers know when I create new designs.
It's actually not that much more heavier than plywood. Although New Guinea Rosewood is a hardwood, it is durable and reasonably light in weight even for a board of this size. Thanks for commenting.
+Government Fodder (GodFodder) For legal reasons I can't give out that information - all works were and are carried out by a licensed electrician, wired and tested to Australian Standards.
+Government Fodder (GodFodder) Surely the Switch and light are connected via the live like any electrical switch. From the input it would be the switch first on the live then the light and back to a junction box to continue to the IEC lead for the 9v supply. Ensuring of course you are sheathing the terminals with heat shrink wrap or terminating them with connectors. Once the board is complete you would have no reason to open the inside whilst live. I reckon you'd need to give enough excess flex for the switch and light to allow the top to be removed.
+ProfoundlyblueUK The wiring incorporating the switch and the light has proven to be technical and costly, especially having to use a low voltage transformer for the light. Have had no issues with flex or other functions while in use, but to simplify things now I have removed the switch and light and use only an IEC and solderless jacks. All connections are sheathed and the IEC is completely insulated. www.pinterest.com/pin/335166397243264894/
I did wonder, I'm about to start building mine but I intended to install the switch inline on the live obviously insulate any bare contacts. For the pilot I intended to use a 240v neon pilot light that's quite inexpensive from a UK retailer called Maplin. This most complicated issue is leaving enough flex to open up the top to adjust cables etc. This would of course have to be done whilst switched off but if you are retailing them then you would have the H&S issues I'd imagine to ensure they are never live when opened which would prove very costly to engineer.
This is probably the best looking pedal board I've ever seen.
Thanks heaps!
That looks gorgeous, certainly a pedalboard for the connoisseur!
Best looking board I've seen, congrats on the suburb work.
Very nice. I've been working with wood for several years and can honestly say this was a great video. Good job.
Yowser, that is stunning. I marvel at folks with those skills......thanks for posting this.
+Dean Arnold Thanks!!
Beautiful craftsmanship. Just awesome. If I had the money I would purchase one of these for sure.
That is some unbelievably good woodwork.
Congratulations for the quality, nice crafting.
Very nice work Brad. Love the walnut finish. If I was you I would invest in a spindle moulder to do all your joints and edging, it would save you ages. I know there is more satisfaction in doing it by hand but as a business venture I would opt for the spindle.
Hi
Thanks for the kind words. I have the machines to do the joinery more efficiently and have used them on other items, but there is something about using hand tools that gives a piece that extra personal touch, which is what I wanted in this case. Because the project was smaller than what I usually make I wanted to hand cut the joinery.
I agree totally with you, if you have the time working with hand tools is so fulfilling. Them Trailer Trash boards might look flashy but your boards just ooze class. Maybe i'll get round to making my own board, I always wanted to have a crack at doing a secret mitred dovetail.
Well the jury's back. Verdict? You're brilliant. Case dismissed.
Thanks for the compliment!
I would LOVE to have one of those pedalboards...
aw sweet Brad, I would love one of those, but not as expensive haha!
I'm curious about the wiring of the toggle switch and Fender style light on the top.. I assume that's to activate power to the entire board via the two power supplies underneath. My question is- What exactly is powering that lamp, surely not 120v? I like the idea. Very cool. I've seen it a couple times before also but never knew who the builder was. Would love to know this part in particular. Great job also!
I love the look and enjoyed seeing your steps. I have just started working with wood and enjoy every minute of learning knew tricks of the trade in the shop. I love that you closed the bottom of this pedal board up and left the thickness of the under board. Also the pegs. I assume that this is to ensure the pedal board itself is not damaged when used. I enjoyed seeing your board come to life. I would like to try my hand at creating this as close to your design and standard as possible. Thank you so much for sharing. If I could ask a question I would like to know how think was all the woods used in this board?
Thanks Jeffery for your comment! Material thickness was 19mm. All the best with your craft.
Hello,exellent work,love this board.what kind of wood did you use for this board.thanx for sharing this very cool video!
have a nice day!
Hi, thanks for the comment.
You are correct about the switch. The globe is powered by a 12v transformer that matches a 12v globe.
Amigo esta genial .. yo pronto estaré en pleno proceso de fabricación de uno saludos...
Thanks and all the best!
Those TRS Solderless Locking Pedalboard Jacks, they only seem to be available in USA, is that the case. Can't find them here in the UK and Neutrik doesn't seem to have them on their website.
Beautiful work! :-)
Hello, and welcome to the History of Rome podcast.
+spearleaf Not sure what you mean.
Brad, congratulations with your fine project. No doubt you will have success with this product. I have two questions: will sell it as a kit? Would you be interested in selling only the blue prints, for the ones that want to use their own materials?
Hi Tiago
Thank you for your kind words. In answer to your questions; I will not be selling it in kit form, as the joinery and combination of materials needs to be very precise. It also goes against my philosophy of Fine Timber Products. Regarding your interest in the plans, I have a basic workshop drawing of the frame dimensions and joinery details that I may upload at some stage, if that takes your interest.
Feel free to check out more details at www.schuursproducts.com.au/pedal-board.html
I completely understand, even more after watching your site, it totaly makes sense.
I´m really thinking about starting my own creations with wood ( everything related to music. Custom pedal boards, amp cases etc) but dont have the knowledge to do it. It is still a brainstorm on my sketch book. The first step is to atend a course on wood craftsman... Thanks Brad. Good luck with your business.
Beautiful board. Actually, too nice to take to a gig.
Haha - thanks! Custom made for a guy who does mainly studio work.
Wow, beautiful!
Thanks!
Hi Brad, can you give me any suggestions on similar wood that would be easy enough to work with and obtain? This is by far the best board i have ever seen.
Hi Evan. Thanks for the kind words, appreciate it! If you let me know where you are based I may be able to make some alternative suggestions that would be suitable locally for you.
Brad, very nice board. Question. What are all the little cutouts on the board under the velcro at 2:24? Is that customer specific for the pedals they use?
Hi Michael. Yes that customer was very specific with the pedal positioning and wiring. The new boards I am working on will be more generic. Thanks for the comment.
This particular Board was $1000 AUD including materials and labour. Currently working out the logistics of international orders as to best protect the timber from the elements and minimise damage during shipping.
O case mais lindo que já vi
Click on the link to view my blog on how to build the Schuurs Pedal Board including free plans. www.schuursproducts.com.au/blog/2015/10/9/how-to-build-the-schuurs-pedal-board-part-1
Very nice... great job
Hi Brad.
That is so beautifully made. I love it, and I think now's the time to invest in quality.
I have a question....could the pedals sit in a shallow recess, rather than be flush mounted. I understand the connections will play a part in the depth and design, but I would prefer all the switches to be the same height. Also, the actual height of the unit, (taking into account the strength at the front base), could be slightly high for me.
Appreciate your thoughts
Regards
Jas
Hi Jas
Thanks for your compliment!
Anything is possible depending on the size of your board and how many pedals you wish to have. The height of of this board was 4" on the crowd side making it just the right size for concealed wiring and power supplies. I always take into consideration the balance of functionality, aesthetics and quality; which can be tricky but you will need to work out as you design your board as to what takes priority and in what order. If you want to discuss further feel free to email www.schuursproducts.com.au/contact-us.html
Lovely work. Is the bottom glued flush with the frame with the edges routed, then reinforced with screws?
Hi! Thanks! No screws used. The base is blind nailed, glued and clamped.
Very nicely done, but I'd stay away from making songs on Garage Band from now on haha
Thanks Nickham. Haha - yes, this was my first RUclips video. I will never use Garage Band clips again. I have had so much trouble with third party content notifications and had to get them released every time. Very frustrating.
absolutely beautiful, are these videos just of your personal uses boards, or do you sell them?
+Adam Smith Hi, these boards I have sold. I am starting a new board for myself soon. Well over due for a nice one just for me. Thanks for your compliment.
Hi everyone
Hi guys
Appreciate your engagement with the Pedal Board Build video. I uploaded it to see if I was going to receive any interest. I custom built this for a friend as a trial for hand made quality products. I have not officially launched my business as yet. Planning to start next year, but feel free to stay in touch.
Many thanks
Brad
sounds like the strumming is in minor, but the bass groove is vamping in major.
Brad, fantastic build. Those dovetails are immaculate!
Question... When using the locking 1/4" jacks, do you ever run into a problem with signal loss? I tried my hand at a build and for the life of me I can't get any of my high end frequencies back. It's as if I'm running a 100' cable. I know a buffer might help but I really think I'm doing something wrong. Thanks in advance.
Hi Joe
Thanks! I have not had any trouble with the jacks. I have an electrician do all my wiring for me so it's all legit.
@jose- You're using the wrong cables. Try using a good to great quality lo-cap cable Lava, mogami or Armor Gold
@brad schuurs can you explain how you did the toggle switch and light indicator connections/wiring? Also, what is that green box beside the supa charger?
Hi. I would use this kit shop.westcoastpedalboard.com/Pedal-Board-Parts-AC-Power-Harness-Combo-p/diy-pedalboard-harness-master.htm
Green box is a T-Rex Fuel Tank power supply. All the best.
New Guinea Rosewood with a Walnut stain.
podés pasar diagrama de cableado y que componentes usaste para la parte eléctrica?
Excellent.
how did you cut off the excess material on the hand made dove tail joints to look so smooth?
+Shelvie Goldschmidt I used a large belt sander to make the sides level and smooth and a disc sander to shape the corners. Final finish by hand sanding.
Is part 3 available yet? Wiring and assembly?
+Kip Blank Working on it!
Hi! nice pedal board. Do you have the build specs for this one? Kennet
www.schuursproducts.com.au/pedal-board.html
That is one sexy pedal board!
Thanks!
What tool are you using starting at 1:07? Thanks
stratguy823 A Trimmer - small hand held router basically. Both will do the job.
cant find this company on google :( I really hope someone takes the time to reply to this video/comment with more information. That is one beautiful board!
nice board how to access it to change out pedals etc.
There are four bolts on the top surface of the board giving you access underneath to fit out power supplies and wiring.
Brad Schuurs cool nice one
hey man im thinking of DIY my own board. can u tell me whats the name or type of the velcro top you are using? and where can i get it ?
+Jayden Chan.
www.ebay.com.au/itm/140412999058?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
hello brad..could you let me know where you get all those accessories like cables, connections etc? thanx
Hi Juro
I have no set supplier, it is wherever I can get the best deals. I have used Ebay, you can also Google search for guitar fitting suppliers as well as local electronic stores. Ensure all works are carried out by a licensed electrician.
Thank you for your answer!
Awesome work! Where did you source that light and bezel from?
Thanks Cameron! The light was sourced from Ebay. All the best! Brad.
Thanks for the reply, any chance of a link to the product?
Try this link. If I were to do this style switch and lamp again I would use these guys!
shop.westcoastpedalboard.com/Pedal-Board-Parts-AC-Power-Harness-Combo-p/diy-pedalboard-harness-master.htm
Hello, someone knows the name of the music ? Looks a lot like Si facile of Casseur Flowters and I would like to know the origin of this sample :)
what are the wiring schematics for the 1/4 inch jacks, toggle with and light. i would like to build my own board.
+Nick DiGiaimo
Sorry I didn't seen your comment earlier. There are very few comments now that RUclips will allow to reply straight away. I don't use switches and lights any more. I have a licensed electrician do all the wiring - now I supply a single to double iec. I also use solderless jacks. You can check out some image on this page of my website. www.schuursproducts.com.au/rosewood-pedalboard
What are the dimensions for this particular board? Nice work, by the way.
Hi Nate, here is a link to my website page with the details.
www.schuursproducts.com.au/pedalboard.html
Thanks for the kind words.
what kind of wood is this??
Sería bueno que nos regalaran las medidas
How did you round the edges of the board?
+M A R C U S H I D A L G O Using a round over bit in a hand held router.
comon get this guy to 1k likes this vid is good.
What is the surface of the board made from?
MDFB lined with Pedalboard velcro and sealed with an acrylic undercoat and topcoat. I am looking into making them from Polycarbonate going forward. More costly and a little heavier, but very durable. Thanks for the question.
awesome!
Thanks!
Hi! How are you
sabro would like Haches the light connections
This might be helpful.
shop.westcoastpedalboard.com/Pedal-Board-Parts-AC-Power-Harness-Combo-p/diy-pedalboard-harness-master.htm
How much? Send to Brazil?
Very nice where can I buy one?
Hi. You can enquire here:
www.schuursproducts.com.au/contact-us.html
Product details:
www.schuursproducts.com.au/pedal-board.html
I will have a website setup with a BPAY option
How much do these boards go for?
theArchive1O At the moment I currently charge $800AUD plus shipping.
Hi everyone
Many thanks to all my subscribers, viewers and the You Tube community for making this video a success. I also appreciate the positive feedback and questions which will help with developing this product more next year. 10K+ views was more than I expected.
I have recently made live my website and facebook page for you to help keep in touch and to check out more details about Schuurs Fine Timber Products.
Thanks again!
www.schuursproducts.com.au/
facebook.com/schuursproducts
And then you get ONE more pedal ...
LOL
whynottalklikeapirat hahahahah i'm building my tone now, coming from multi effects to analog now. And i can see that i will be broke soon hahah
SuburbanBoy
Tread carefully, Padawan - it is a dangerous road ahead of you.
When my 90's rack got stolen it seemed like that cheap, slow and steady way to rebuild. Initially it was. These days I like to think of pedals as the Jelly Beans of guitar. So many colours. So many flavours. So little cash. Yet I salute you for leaving all in one multieffect solutions behind you. You have chosen wisely.
"The board is set - the pieces are moving"
- Gandalf, stating the obvious.
you have to gote the tools to do that....
deve custar os 1200 reais
Hi - I cannot seem to translate your comment.
Cristiano Silva he said that it might cost about 1200 BRL
5 mil pesos!
Hi. Yes this particular board was costly but am working on some smaller designs and simplifying some systems. This customer was really specific about what they wanted which made labour expensive. I'll be letting my subscribers know when I create new designs.
Dove tails for a pedal board? Hell you should make the actual guitars if you got that kinda time and know-how. Screw the pedal boards!
too heavy!
It's actually not that much more heavier than plywood. Although New Guinea Rosewood is a hardwood, it is durable and reasonably light in weight even for a board of this size. Thanks for commenting.
How did you wire the switch and light?
+Government Fodder (GodFodder) For legal reasons I can't give out that information - all works were and are carried out by a licensed electrician, wired and tested to Australian Standards.
+Government Fodder (GodFodder)
Surely the Switch and light are connected via the live like any electrical switch. From the input it would be the switch first on the live then the light and back to a junction box to continue to the IEC lead for the 9v supply.
Ensuring of course you are sheathing the terminals with heat shrink wrap or terminating them with connectors.
Once the board is complete you would have no reason to open the inside whilst live. I reckon you'd need to give enough excess flex for the switch and light to allow the top to be removed.
+ProfoundlyblueUK The wiring incorporating the switch and the light has proven to be technical and costly, especially having to use a low voltage transformer for the light. Have had no issues with flex or other functions while in use, but to simplify things now I have removed the switch and light and use only an IEC and solderless jacks. All connections are sheathed and the IEC is completely insulated. www.pinterest.com/pin/335166397243264894/
I did wonder, I'm about to start building mine but I intended to install the switch inline on the live obviously insulate any bare contacts. For the pilot I intended to use a 240v neon pilot light that's quite inexpensive from a UK retailer called Maplin. This most complicated issue is leaving enough flex to open up the top to adjust cables etc. This would of course have to be done whilst switched off but if you are retailing them then you would have the H&S issues I'd imagine to ensure they are never live when opened which would prove very costly to engineer.
Looking forwards to the 3rd blog for the final finishes